Abstract
Aggregates are used in a variety of construction applications, and each application has its particular requirements as to the aggregate’s properties. Aggregates for concrete production occupy 70–80 % of its volume, where fine aggregates represent about 1/3 of the total volume of aggregates. Fluvial aggregate constitutes one of the most naturally occurring resources of building materials. In Sohag Governorate, Upper Egypt, natural fluvial fine aggregates of Qena Formation are distributed with a wide range of potential sources. Geological and engineering characteristics of these aggregates are of vital importance in the evaluation of these aggregates, especially when they are used as a construction material. The estimated reserve of fine aggregates covers more than 833 million m3. Fineness modulus value of these aggregates varies from 2.2 to 2.9 and their roundness degree indicates small amounts of inter-particle void content and tight pack. The fine aggregates of Qena Formation are composed mainly of quartz (95 %), feldspars (4 %), and trace amount of calcite (~1 %). The chemical analyses proved that theses aggregates can be used to produce concrete without chemical destructive attack. Based on the mineralogical composition and chemical stability data of the studied fluvial fine aggregates of Qena Formation, these aggregates are stable enough (compositionally and chemically) and are capable of producing concrete without sulfate and other alkalis attack.
Similar content being viewed by others
References
Abu Seif ES (2013) Assessing the engineering properties of concrete made with fine dune sands: an experimental study. Arab J Geosci 6:857–863
Abu Seif ES (2014) Geomechanical evaluation of Pliocene natural aggregates as pavement materials. Arab J Geosci 7:1567–1576
ACI 116 (1985) ACI Committee 116, Cement and Concrete Terminology, Publication SP-19 (85), Detroit, Michigan
ACI Committee 221 (2001) Guide for use of normal weight aggregate in concrete. ACI manual of concrete practice: Part 1. Farmington Hills (MI): ACI
ACI- E-701 (2007) Aggregates for concrete. American Concrete Institute, 38800 Country Club Drive, Farmington Hills, MI 48331
Afifipour M, Moarefvand P (2014) Failure patterns of geomaterials with block-in-matrix texture: experimental and numerical evaluation. Arab J Geosci 7:2781–2792
Alekhya P, Aravindan S (2014) Experimental investigations on geopolymer concrete. Int J Civ Eng Technol (IJCIET) 5(4):01–09
ASTM C128 (1993) Standard test method for specific gravity and absorption of fine aggregate. ASTM C 128, American Society for Testing and Materials, ASTM specification, Philadelphia
ASTM C136 (2004) Standard test method for sieve analysis of fine and coarse aggregates, ASTM Annual Book of Standards, 04–02
ASTM C33 (2003) Standard specification for concrete aggregates. American Society for Testing and Materials, ASTM specification, Philadelphia
ASTM C469 (1994) Standard test method for static modulus of elasticity and Poisson’s Ratio of concrete in compression. American Society for Testing and Materials, ASTM specification, Philadelphia
ASTM D2419-95 (1998) Standard test method for sand equivalent value of soils and fine aggregate. American Society for Testing and Materials, Philadelphia 1103–1187
Baker SD, Scholer CF (1973) Effect of variations in coarse-aggregate gradation on properties of Portland cement concrete. Highway Research Record, No.441, Grading of Concrete Aggregates, Highway Research Board, Washington, D. C
Beal MA, Shepard FP (1956) A use of roundness to determine depositional environments. J Sediment Petrol 26:49.60
Biczok I (1972) Concrete corrosion concrete protection. Akademiai Kiado, Budapest
BS EN 12390:3 (2002) Testing hardened concrete—Part-3: compressive strength of test specimens. British Standards institution
Chatterji N, Thaulow AD, Jensen AD (1989) Studies of alkali–silica reaction. Part 5. Verification of a newly proposed reaction mechanisms. Cem Concr Res 19:77–83
Collis L, Fox RA (1985) Aggregates: sand, gravel and crushed rock aggregates for construction purposes. Geological Society of Engineering Geology. Special Publication 1.1, London
Diamond S, Barneyback RS Jr, Struble LJ (1981) On the physics and chemistry of alkali-silica reaction. Proceedings of the 5th Conference on Alkali-aggregate Reaction in concrete, National Building Research institute, Pretoria, South Africa, 1–11
Egyptian Code (2007) Egyptian Code of Practice for Concrete Structures, HBRC, in Arabic, Cairo, Egypt
Egyptian Standard Specifications (2007) Composition, specifications and conformity criteria for common. Cements, Part 1, ES: 4756–1
Ferraris CF (1999) Measurement of the rheological properties of high performance concrete: state of the art report. J Res Natl Inst Stand 104(5):461–477
Gillott JE (1980) Properties of aggregates affecting concrete in North America. Q J Eng Geol Hydrog 13(4):289–303
Griffiths JC (1967) The scientific method in the analysis of sediments. McCraw-Hill, New York, p 508
Hewlett PC (1998) Lea’s chemistry of cement and concrete, 4th edn. Wiley, New York
Hua J, Wang K (2011) Effect of coarse aggregate characteristics on concrete rheology. Constr Build Mater 25:1196–1204
Hveem FN (1953) Sand equivalent test for Control of materials during construction. Proceedings, Highway Research Board, Vol., 32
Issawi B, McCauley JF (1992) The Cenozoic rivers of Egypt: the Nile problem. In: Freidman, R. and Adams, B. (Eds.) The followers of Horus, Egypt: Studies Assoc. Public., No.2, Oxbow Monog. 20, Park End Place, Oxford, 121–138
Issawi B, Hassan MW, Osman R (1978) Geological studies in the area of Kom Ombo, Eastern Desert, Egypt. Ann Geol Survey Egypt VIII:187–235
Jamkar SS, Rao CBK (2004) Index of aggregate particle shape and texture of coarse aggregate as a parameter for concrete mix proportioning. Cem Concr Res 34(11):2021–2027
Jing H, Stroeven P (2006) Shape characterization of concrete aggregate. J Image Anal Stereology 25:43–53
Khalil YS, Arif M, Bangash HA, Sajid M, Muhammad N (2014) Petrographic and structural controls on geotechnical feasibility of dam sites: implications from investigation at Sher Dara area (Swabi), north-western Pakistan. Arab J Geosci. doi:10.1007/s12517-014-1510-z
Kosmatka SH, Panarese WC (1998) Design and control of concrete mixtures, 13th edn. Portland Cement Association, Skokie, Illinois
Kosmatka SH, Kerkhoff B, Panarese WC (2002) Design and control of concrete mixture, 14th edn. Portland Cement Association, Skokie
Langer WH (1993) Natural aggregates of the conterminous United States. U.S. Geological Survey Bulletin No. 1594, 2nd Printing
Lerch W (1955) Chemical reaction of concrete aggregate: American Society for Testing and Materials Special Technical Publication 169, 334–345
Lindqvist JE, Åkesson U, Malaga K (2007) Microstructure and functional properties of rock materials. Mater Charact 58:1183–1188
Mahran TM (1992) Sedimentological development of the Upper Pliocene—Pleistocene sediments in the area of El Salamony and El Sawamha Sharq, NE Sohag, Nile Valley, Egypt. Sohng pure & App. Sci. Bull. Fac. Sci., Assiut Univ., Egypt, 8, 251–276
Mahran TM, El-Shater A, Youssef AM, El-Haddad BA (2013) Facies analysis and tectonic-climatic controls of the development of Pre-Eonile and Eonile sedimentsof the Egyptian Nile west of Sohag. The 7th international conference on the geology of Africa, Assiut, Egypt (Abstract)
Mather B (1975) New Concern over Alkali-Aggregate Reaction, Joint Technical Paper by National Aggregates Association and National Ready Mixed Concrete Association, NAA Circular No. 122 and NRMCA Publication No. 149, Silver Spring, Maryland
Mazaheri MR, Mahmoodabadi M (2012) Study on infiltration rate based on primary particle size distribution data in arid and semiarid region soils. Arab J Geosci 5:1039–1046
Mehta PK, Monteiro PJM (1993) Concrete structure, properties, and materials, 2nd edn. Prentice-Hall, Inc., Englewood Cliffs, NJ
Mehta PK, Monteiro PJMM (2006) Concrete-structure, properties and materials, 3rd edn. McGraw-Hill, New York
Neville AM (1973) Properties of concrete, 4th edn. Addison-Wesley/Longman Limited, Harlow (UK), Final edition
Neville AM (1995) Properties of concrete, Longman Group Limites, p. 844
Omer AA (1996) Geological, mineralogical and geochemical studies on the Neogene and Quaternary Nile basin deposits, Qena-Assiut stretch, Egypt. Ph.D. thesis, Geology Dept. Faculty of Science, Sohag, South Valley University, 320 p
Omer AA, Issawi B (1998) Lithostratigraphical, mineralogical and geochemical studies on the Neogene and Quaternary Nile basin deposits, Qena-Assiut stretch, Egypt. The 4th International conference on Geology of the Arab World, Cairo (Abstract)
Omran AA (2008) Integration of remote sensing, geophysics and GIS to evaluate groundwater potentiality—a case study in Sohag Region, Egypt. The 3rd International Conference on Water Resources and Arid Environments and the 1st Arab Water Forum
Paulissen M and Vermeersch PM (1987) Earth, man and climate in the Egyptian Nile Valley during the Pleistocene: In: A. Close (Ed.) Prehistory of North Africa. Southern Methodist University Press, Dallas, 29–67
Pettijohn FJ (1975) Sedimentary rocks. Harper and Row, New York, p 638
Powers MC (1953) A new roundness scale for sedimentary particles. J Sediment Petrol 23:117–119
Powers TC (1968) Properties of fresh concrete. New York:Wiley, p 654
Rocco CG, Elices M (2009) Effect of aggregate shape on the mechanical properties of a simple concrete. Eng Fract Mech 76:286–298
Said R (1975) The geological evolution of the River Nile. In: Wendorf F, Maks AF (eds) Problems in prehistory of Northern Africa and the Levant. Southern Methodist University Press, Dallas, Texas, pp 1–44
Said R (1981) The geological evaluation of the River Nile. Springer, Heidelberg, Berlin, p 151
Said R (1983) Proposed classification of the Quaternary of Egypt. J Afr Earth Sci 1:41–45
Said R (1990) The geology of Egypt. S.A., Balkema, Rotterdam, Brookfield, p 731
Shepard FP, Young R (1961) Distinguishing between beach and dune sands. Sed Petrol 31:196.214
Skalny J, Marchand J, Odler I (2002) Sulphate attack on concrete. Spon Press, London, p 230
Smith RC (1979) Materials and construction, 3rd edn. Mc-Graw-Hill, Inc., United States of America, p 94
Smith MR, Collis L (2001) Aggregates-sand, gravel and crushed rock aggregates for construction purposes, 3rd edn. The Geological Society, London
Somayaji S (2001) Civil engineering materials, 2nd edn. Prentice-Hall, Inc., New Jersey, USA
St John DA, Poole AB (1995) Sims I. Concrete petrography. A handbook of investigative techniques. Arnold, London
Struble LJ, Szecsy R, Lei W, Sun G (1998) Rheology of cement paste and concrete. Cem Concr Aggress 20(2):269–277
Tattersall GH (1991) Workability and quality control of concrete. Published by E & F N Spon, ISBN 13: 9780419148609, 373p
Tattersall GH, Banfill PFG (1983) The rheology of fresh concrete. Pitman Publishing Inc, Marshfield, p 356
Todd SP, Went DJ (1991) Lateral migration of sand-bed rivers, examples from the Devonian Glashabeg Formation, SW Ireland and the Cambrian Aldermy Sandstone Formation, Channel Islands. Sedimentology 38:997–1020
Wendorf F, Said R (1967) Paleolithic remains in Upper Egypt. Nature 215:244–247
Wendorf F, Schild R (1976) Prehistory of the Nile Valley. Academic, New York, p 404
Wilby CB (1991) Concrete materials and structures. Cambridge University Press, Cambridge, MA
Wills MH (1967) How aggregate particle shape influences concrete mixing water requirement and strength. J Mater 2(4):101–111
Acknowledgments
The author is deeply grateful to Prof. Dr. A.M. Al-Amri (the Editor-in-Chief), Prof. Dr. Biswajeet Pradhan (Editor), and the anonymous reviewers for insightful comments and criticism that improved this manuscript.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Abu Seif, ES.S. Geotechnical approach to evaluate natural fine aggregates concrete strength, Sohag, Governorate, Upper Egypt. Arab J Geosci 8, 7565–7575 (2015). https://doi.org/10.1007/s12517-014-1705-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12517-014-1705-3