Abstract
Recent changes in the Korean climate have led to an increase in ventilation load and building energy consumption. This study focuses on the operation of a ventilation system integrated with an Energy Recovery Ventilator (ERV) and a hybrid desiccant system in an attempt to reduce energy consumption in buildings under the Korean climate. The ERV and hybrid desiccant system are each suitable for reducing sensible and latent loads and saving building energy in the Korean climate, which is hot and humid in summer and cold and dry in winter. The energy performance of ERV was measured and analyzed. The efficiency of the ventilation system, building energy, and indoor air quality were simulated by EnergyPlus 8.7. A ventilation strategy was suggested for the Korean climate based on both measurement and simulation results. The winter ventilation strategy, which includes indoor humidity control of 30%, and constant ERV operation with frost protections (such as recirculating exhaust air and bypassing outdoor air), was shown to save 23% of heating energy. The summer ventilation strategy, which includes an ERV & hybrid desiccant system and fixed enthalpy economizer control saved 22.5% of cooling energy.
Similar content being viewed by others
References
Abdel-Salam AH, Simonson CJ (2014). Annual evaluation of energy, environmental and economic performances of a membrane liquid desiccant air conditioning system with/without ERV. Applied Energy, 116: 134–148.
AHRI (2011). AHIR Guideline V (I-P), 2011 Guildeline for Calculating the Efficiency of Energy Recovery Ventilation and Its Effect On Efficiency and Sizing Of Building HVAC Systems. Arlington, VA, USA: Air-Conditioning, Heating, and Refrigeration Institute.
AHRI (2013). AHRI Standard 1060 (I-P), 2013 Standard for Performance Rating of Air-to-Air Exchangers for Energy Recovery Ventilation Equipment. Arlington, VA, USA: Air-Conditioning, Heating, and Refrigeration Institute.
ASHRAE (2007). ANSI/ASHRAE Standard 90.1-2007, Energy Standard for Buildings Exept Low-rise Residential Buildings. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air- Conditioning Engineers.
ASHRAE (2009). ANSI/ASHRAE Standard 174-2009, Method of Test for Rating Desicant-based Dehumidifacation Equipment. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air- Conditioning Engineers.
ASHRAE (2011). ASHRAE Handbook—HVAC Applications. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.
ASHRAE (2012). ASHRAE Handbook—HVAC Systems and Equipment. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.
ASHRAE (2013). ANSI/ASHRAE Standard 84-2013, Method of testing air-to-air heat/energy exchangers. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.
Bilodeau S, Brousseau P, Lacroix M, Mercadier Y (1999). Frost formation in rotary heat and moisture exchangers. International Journal of Heat and Mass Transfer, 42: 2605–2619.
Fan Y, Kameishi K, Onishi S, Ito K (2014). Field-based study on the energy-saving effects of CO2 demand controlled ventilation in an office with application of Energy recovery ventilators. Energy and Buildings, 68: 412–422.
Hemingson HB, Simonson CJ, Besant RW (2011). Steady-state performance of a run-around membrane energy exchanger (RAMEE) for a range of outdoor air conditions. International Journal of Heat and Mass Transfer, 54: 1814–1824.
Hwang WB, Choi S, Lee DY (2017). In-depth analysis of the performance of hybrid desiccant cooling system incorporated with an electric heat pump. Energy, 118: 324–332.
Jeong JW, Mumma SA (2005). Practical thermal performance correlations for molecular sieve and silica gel loaded enthalpy wheels. Applied Thermal Engineering, 25: 719–740.
Kim KH, Yee JJ (2008). A study on operating method by energy evaluation and performance evaluation of heat recovery ventilator accordiong to outdoor conditions. International Journal of Air-Conditioning and Refrigeration, 20(1): 57–64. (in Korean)
Kim SS, Yee JJ, Lee YG (2008). Performance evaluation of an energy recovery ventilator with various outdoor climate conditions. Journal of the Architectural Institute of Korea, 24(8): 261–268. (in Korean)
Kim WJ, Jeong JW (2017). Determination of preheat coil capacity in an Energy Recovery Ventilator considering the differences in sensible and latent effectiveness values. Journal of Korean Institute of Architectural Sustainable Environment and Buildings Systems, 11(3): 197–202. (in Korean)
Korea Forest Service (2018). 2017 Statistical Yearbook of Forest Fire. Daejeon, Republic of Korea. (in Korean)
Korea Meteorological Administration (2015). Available at https://doi.org/data.kma.go.kr. Seoul, Republic of Korea. Accessed 18 Jun 2018.
Korea Meteorological Administration (2018). 2017 Abnormal Climate Report. Seoul, Republic of Korea. (in Korean)
Ministry of Environment (2018). Indoor Air Quality Control act. Sejong, Republic of Korea. (in Korean)
Nasr MR, Fauchoux M, Besant RW, Simonson CJ (2014). A review of frosting in air-to-air energy exchangers. Renewable and Sustainable Energy Reviews, 30: 538–554.
Nasr MR, Kassai M, Ge G, Simonson CJ (2015). Evaluation of defrosting methods for air-to-air heat/energy exchangers on energy consumption of ventilation. Applied Energy, 151: 32–40.
Office for Government Policy Coordination Prime Minister’s Secretariat (2010). Frame Act on Low Carbon, Green Growth. Sejong, Republic of Korea. (in Korean)
Rasouli M, Simonson CJ, Besant RW (2010). Applicability and optimum control strategy of energy recovery ventilators in different climatic conditions. Energy and Buildings, 42:1376–1385.
Republic of Korea (2016). Republic of Korea First NDC. United Nations Framework Convention on Climate Change Secretariat. Available at https://doi.org/www4.unfccc.int/ndcregistry/pages/Party.aspx?party=KOR. Accessed 18 Jun 2018.
Simonson CJ, Besant RW (1999a). Energy wheel effectiveness: part I-development of dimensionless groups. International Journal of Heat and Mass Transfer, 42: 2161–2170.
Simonson CJ, Besant RW (1999b). Energy wheel effectiveness: part II-correlations. International Journal of Heat and Mass Transfer, 42: 2171–2185.
U.S. Department of Energy (2008). M&V Guidelines: Measurement and Verification for Federal Energy Projects Version 3.0. United States Department of Energy, Washington, DC. U.S.
Department of Energy (2016). EnergyPlus Version 8.7 Documentation Input Output Reference. United States Department of Energy, Washington, DC.
Wu W, Fang Z, Ji W, Wang H (2016). Optimal operation condition division with profit and losses analysis of energy recovery ventilator. Energy and Buildings, 124: 203–209.
Xiao F, Ge G, Niu X (2011). Control performance of a dedicated outdoor air system adopting liquid desiccant dehumidification. Applied Energy, 88:143–149.
Zhang J, Fung AS (2015). Experimental and numerical investigation of the thermal impact of defrost cycle of residential heat and energy recovery ventilators. Energy and Buildings, 97: 129–136.
Acknowledgements
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIP) (No. 2017R1D1A1B03028205). This work was supported by the Korea Institute of Energy Technology Evaluation and Planning (KETEP) and the Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea (No. 20162020108210).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, HR., Jeon, JU. & Kim, KS. Performance measurements of an energy recovery ventilator (ERV) and effective ventilation strategy with ERV and hybrid desiccant system. Build. Simul. 12, 489–504 (2019). https://doi.org/10.1007/s12273-018-0504-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12273-018-0504-2