Abstract
The development of vacuum glazed windows in recent decades has provided a foreseeable energy saving opportunity in the design of low-energy consumption buildings and the application of building integrated photovoltaic (BIPV) has experienced rapid development for application in buildings. This paper reports our investigations on the combinations of the vacuum glazing and BIPV integration. Semi-transparent photovoltaic windows can convert solar energy into electricity, but most of absorbed solar heat is transferred into indoor environment which becomes additional cooling load. The proposed vacuum photovoltaic insulated glass unit (VPV IGU) in this paper combines vacuum glazing and solar photovoltaic technologies, which can utilize solar energy and reduce cooling load of buildings at the same time. Various experiments were conducted to evaluate the thermal performance and determine the key characteristics of the VPV IGU in this study. It was found that the VPV IGU can achieve very low total heat gain coefficient (U-value) of around 1.5 W/(m2 K) and block most of undesired solar radiation from penetrating through the window. Compared with a common double-pane glass sheet, the vacuum PV glazing can maintain the indoor environment at a relatively low temperature due to its excellent thermal insulation performance in summer. A detailed simulation study has been conducted by EnergyPlus and Berkeley Lab WINDOW. The simulation work has indicated that the cooling load can be reduced by 14.2% by a south-oriented VPV IGU compared with common glazing products while power generation is not compromised compared with normal BIPV systems. The results show that the application of the VPV IGU has a huge energy saving potential and can minimize the drawback of common PV insulating glass units.
Similar content being viewed by others
References
Authority (1995). Code of Practice for Overall Thermal Transfer Value in Buildings 1995. Building Authority, Hong Kong SAR, China.
Baetens R, Jelle BP, Gustavsen A (2011). Aerogel insulation for building applications: A state-of-the-art review. Energy and Buildings, 43: 761–769.
Chan ALS, Chow TT, Fong SKF, Lin JZ (2006). Generation of a typical meteorological year for Hong Kong. Energy Conversion and Management, 47: 87–96.
Chen X, Yang H, Lu L (2015). A comprehensive review on passive design approaches in green building rating tools. Renewable and Sustainable Energy Reviews, 50: 1425–1436.
Chow TT, Qiu Z, Li C (2009). Potential application of “see-through” solar cells in ventilated glazing in Hong Kong. Solar Energy Materials and Solar Cells, 93: 230–238.
Collins RE, Turner GM, Fischer-Cripps AC, Tang J-Z, Simko TM, Dey CJ, Clugston DA, Zhang Q-C, Garrison JD (1995). Vacuum glazing—A new component for insulating windows. Building and Environment, 30: 459–492.
Collins RE, Simko TM (1998). Current status of the science and technology of vacuum glazing. Solar Energy, 62: 189–213.
Collins R, Asano O, Misonou M, Katoh H, Nagasaka S (1999). Vacuum glazing: Design options and performance capability. In: Proceedings of Glass in Buildings Conference, Bath, UK.
Cuce E, Cuce PM (2016). Vacuum glazing for highly insulating windows: Recent developments and future prospects. Renewable and Sustainable Energy Reviews, 54: 1345–1357.
Cuce E, Riffat SB (2015a). Aerogel-assisted support pillars for thermal performance enhancement of vacuum glazing: A CFD research for a commercial product. Arabian Journal for Science and Engineering, 40: 2233–2238.
Cuce E, Riffat SB (2015b). A state-of-the-art review on innovative glazing technologies. Renewable and Sustainable Energy Reviews, 41: 695–714.
Cuce E, Riffat SB, Young CH (2015). Thermal insulation, power generation, lighting and energy saving performance of heat insulation solar glass as a curtain wall application in Taiwan: A comparative experimental study. Energy Conversion and Management, 96: 31–38.
EnergyPlus (2018). Available at https://energyplus.net.
Zoller F (1924). Hollow pane of glass. German Patent No. 387655.
Fang Y, Hyde T, Hewitt N, Eames PC, Norton B (2010a). Thermal performance analysis of an electrochromic vacuum glazing with low emittance coatings. Solar Energy, 84: 516–525.
Fang Y, Hyde TJ, Hewitt N (2010b). Predicted thermal performance of triple vacuum glazing. Solar Energy, 84: 2132–2139.
Fang Y, Hyde TJ, Arya F, Hewitt N (2013). A novel building component hybrid vacuum glazing—A modelling and experimental validation. ASHRAE Transactions, 119(2): 430–441.
Fang Y, Hyde TJ, Arya F, Hewitt N, Eames PC, Norton B, Miller S (2014). Indium alloy-sealed vacuum glazing development and context. Renewable and Sustainable Energy Reviews, 37: 480–501.
Fung TYY, Yang H (2008). Study on thermal performance of semitransparent building-integrated photovoltaic glazings. Energy and Buildings, 40: 341–350.
Ghosh A, Norton B, Duffy A (2016). Measured thermal performance of a combined suspended particle switchable device evacuated glazing. Applied Energy, 169: 469–480.
Gustavsen A, Jelle BP, Arasteh D, Kohler C (2007). State-of-the-art highly insulating window frames-Research and market review. LBNL Report LBNL-1133E, Lawrence Berkeley National Laboratory, USA.
Hee WJ, Alghoul MA, Bakhtyar B, Elayeb O, Shameri MA, Alrubaih MS, Sopian K (2015). The role of window glazing on daylighting and energy saving in buildings. Renewable and Sustainable Energy Reviews, 42: 323–343.
Hong Kong Information Services Department (2015). The Hong Kong Year Book 2015. Available at http://www.yearbook.gov.hk/2015/en/index.html.
Hong T, Langevin J, Sun K (2018). Building simulation: Ten challenges. Building Simulation, https://doi.org/10.1007/s12273-018-0444-x.
ISO (2003). ISO 15099:2003. Thermal Performance of Windows, Doors and Shading Devices—Detailed Calculations. Geneva: International Organization for Standardization.
LBNL (2017). WINDOW. Available at https://windows.lbl.gov/software/window.
Li DHW, Lam TNT, Chan WWH, Mak AHL (2009). Energy and cost analysis of semi-transparent photovoltaic in office buildings. Applied Energy, 86: 722–729.
Liao W, Xu S (2015). Energy performance comparison among seethrough amorphous-silicon PV (photovoltaic) glazings and traditional glazings under different architectural conditions in China. Energy, 83: 267–275.
Lu L, Law KM (2013). Overall energy performance of semi-transparent single-glazed photovoltaic (PV) window for a typical office in Hong Kong. Renewable Energy, 49: 250–254.
Ma T, Yang H, Zhang Y, Lu L, Wang X (2015). Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: A review and outlook. Renewable and Sustainable Energy Reviews, 43: 1273–1284.
Manz H, Brunner S, Wullschleger L (2006). Triple vacuum glazing: Heat transfer and basic mechanical design constraints. Solar Energy, 80: 1632–1642.
Omer AM (2008). Energy, environment and sustainable development. Renewable and Sustainable Energy Reviews, 12: 2265–2300.
Peng J, Lu L, Yang H (2013). An experimental study of the thermal performance of a novel photovoltaic double-skin facade in Hong Kong. Solar Energy, 97: 293–304.
Peng J, Lu L, Yang H, Ma T (2015a). Comparative study of the thermal and power performances of a semi-transparent photovoltaic façade under different ventilation modes. Applied Energy, 138: 572–583.
Peng J, Lu L, Yang H, Ma T (2015b). Validation of the Sandia model with indoor and outdoor measurements for semi-transparent amorphous silicon PV modules. Renewable Energy, 80: 316–323.
Peng J, Curcija DC, Lu L, Selkowitz SE, Yang H, Mitchell R (2016a). Developing a method and simulation model for evaluating the overall energy performance of a ventilated semi-transparent photovoltaic double-skin facade. Progress in Photovoltaics: Research and Applications, 24: 781–799.
Peng J, Curcija DC, Lu L, Selkowitz SE, Yang H, Zhang W (2016b). Numerical investigation of the energy saving potential of a semitransparent photovoltaic double-skin facade in a cool-summer Mediterranean climate. Applied Energy, 165: 345–356.
Schultz JM, Jensen KI (2008). Evacuated aerogel glazings. Vacuum, 82: 723–729.
Simko T, Collins RE (2014). Vacuum glazing: Development, design challenges and commercialisation. Australian Journal of Mechanical Engineering, 12: 305–316.
Skandalos N, Karamanis D (2015). PV glazing technologies. Renewable and Sustainable Energy Reviews, 49: 306–322.
Wang M, Peng J, Li N, Lu L, Ma T, Yang H (2016). Assessment of energy performance of semi-transparent PV insulating glass units using a validated simulation model. Energy, 112: 538–548.
Wang M, Peng J, Li N, Yang H, Wang C, Li X, Lu T (2017). Comparison of energy performance between PV double skin facades and PV insulating glass units. Applied Energy, 194: 148–160.
Wong PW, Shimoda Y, Nonaka M, Inoue M, Mizuno M (2008). Semi-transparent PV: Thermal performance, power generation, daylight modelling and energy saving potential in a residential application. Renewable Energy, 33: 1024–1036.
Youssef AMA, Zhai ZJ, Reffat RM (2015). Design of optimal building envelopes with integrated photovoltaics. Building Simulation, 8: 353–366.
Zhang W, Lu L, Chen X (2016a). Performance evaluation of vacuum photovoltaic insulation glass unit. Paper presented at the 8th International Conference on Applied Energy, Beijing, China.
Zhang W, Lu L, Peng J, Song A (2016b). Comparison of the overall energy performance of semi-transparent photovoltaic windows and common energy-efficient windows in Hong Kong. Energy and Buildings, 128: 511–518.
Zhang W, Lu L, Peng J (2017). Evaluation of potential benefits of solar photovoltaic shadings in Hong Kong. Energy, 137: 1152–1158.
Acknowledgements
The work described in this paper is supported by a grant from the Hong Kong Construction Industry Council (Project: K-ZJK1) for developing this technology. Its contents are solely the responsibility of the authors and do not necessarily represent the official view of the Hong Kong Construction Industry Council.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Qiu, C., Yang, H. & Zhang, W. Investigation on the energy performance of a novel semi-transparent BIPV system integrated with vacuum glazing. Build. Simul. 12, 29–39 (2019). https://doi.org/10.1007/s12273-018-0464-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12273-018-0464-6