Skip to main content
Log in

Indoor positioning with GPS and GLONASS-like signals use of new codes and a repealite-based infrastructure in a typical museum building

  • Published:
annals of telecommunications - annales des télécommunications Aims and scope Submit manuscript

Abstract

In order to propose a solution for the indoor positioning question, several tests with the repealite-based (similar to Pseudolites and repeaters) system have been carried out. This system uses a single Global Navigation Satellite System signal transmitted by all the indoor antennas. These signals may interfere with the satellite ones outdoors. Hence, the noise level at the outdoor receiver will be higher and the error range larger. To avoid these effects, new codes called Indoor-Modified Binary Offset Carrier codes that are capable of reducing interference with outdoor signals are generated. To analyse the performance of these codes, we carry out a theoretical expression of cross-correlation functions. Then the deployment of the repealite based system in a typical building is simulated. The goal of this step is to compare the interference performance of the new code with the one already used (Gold codes for GPS band and maximal sequence for Glonass one). A specific interest is given to the spectral interference when adding the new signal’s spectrum in the considered frequency band.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21

Similar content being viewed by others

References

  1. N. Samama (2012) Indoor positioning with GNSS-like local signal transmitters. In: Global navigation satellite systems: signal, theory and applications. InTech, doi:10.5772/30567

  2. Proakis JG (2008) Digital communication, 5th edn. McGraw-Hill, New York

    Google Scholar 

  3. McEliece RJ (1987) Finite fields for computer scientists and engineers. Kluwer Academic, Boston

    Book  MATH  Google Scholar 

  4. Gold R (1968) Maximal recursive sequences with 3-valued recursive cross-correlation functions (Corresp.). Information Theory, IEEE Transactions 14(1):154–156. doi:10.1109/TIT.1968.1054106

    Article  MATH  Google Scholar 

  5. Gold R (1967) Optimal binary sequences for spread spectrum multiplexing (Corresp.). Information Theory, IEEE Transactions 13(4):619–621. doi:10.1109/TIT.1967.1054048

    Article  MATH  MathSciNet  Google Scholar 

  6. L. Selmi and N. Samama (2013) Design of new codes for reducing interference between GNSS-like signals transmitted indoors. Paper presented at the indoor positioning and indoor navigation (IPIN 2013), Belfort

  7. I. Selmi and N. Samama (2011) Optimal codes for GNSS-like signals for indoor positioning. Paper presented at the European Navigation Conference 2011, London

  8. H. S. Cobb (1997) GPS pseudolites: theory, design, and applocations. Ph.D. thesis, Stanford University

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ikhlas Selmi.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Selmi, I., Samama, N. Indoor positioning with GPS and GLONASS-like signals use of new codes and a repealite-based infrastructure in a typical museum building. Ann. Telecommun. 69, 641–655 (2014). https://doi.org/10.1007/s12243-014-0422-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12243-014-0422-y

Keywords

Navigation