Abstract
A new type of thin-walled rods with a semi-open cross-section is suggested and the optimization performed. Descriptive of this class of thin-walled beam-like structures is the closed but flattened profile. In this work, an intermediate class of thin-walled beam cross sections is studied. The cross-section of the beam is closed, but the shape of the cross-section is elongated and curved. The walls that form the cross section are nearly equidistant. The principle application of the theory of semi-open thin-walled beams is the twist beam of the semi-solid trail arm axle. The analytical expressions for the effective torsion stiffness and effective bending stiffness of the twist beam are derived in terms of section properties of the twist beam with a semi-open cross section. Based on the stiffness coefficients of the twist beam, the roll rate, chamber and lateral rigidity of the suspension are derived.
Similar content being viewed by others
References
Choi, B. L., Choi, D.-H., Min, J., Jeon, K., Park, S. and Ko, J.-M. (2009). Torsion beam axle system design with a multidisciplinary approach. Int. J. Automotive Technology 10,1, 49–54.
Eliseev, V. V. (2003). Mechanics of Deformable Bodies. St. Petersburg State Polytechnical University Publishing House. St. Petersburg.
Eliseev, V. V. and Vetyukov, Y. M. (2010). Finite deformation of thin shells in the context, of analytical mechanics of material surfaces. A Mech., 209, 43–57.
Gillespie, T. D. (1992). Fundamentals of Vehicle Dynamics. SAE. Warerndale.
Golubev, O. B. (1963) Generalization of the theory of thin rods. Trans. Leningrad Polytechnical Institute, 226, 83–93.
Kobelev, V. V. and Larichev, A. D. (1988). Model of thinwalled anisotropic rods. Mechanics of Composite Materials, 24, 97–104.
Kollar, L. P. and Pluzsik, A. (2002). Analysis of thinwalled composite beams with arbitrary layup. J. Reinforced Plastics and Composites, 21, 1423.
Lee, G., Choi, B.-L., Choi, D.-H., Nam, C.-H., Park, J.-Y. and Kim, K.-H. (2010). Design optimization of coupled torsion beam axle suspension considering kinematic and compliance performances and its variations. 6th China-Japan-Korea Joint Symp. Optimization of Structural and Mechanical Systems, Kyoto, Japan.
Librescu, L. and Song, O. (2006). Thin-Walled Composite Beams, Theory and Application. Springer Berlin Heidelberg.
Linnig, W., Zuber, A., Frehn, A., Leontaris. G. and Christophliemke, W. (2009). The Twist Beam Rear Axle — Design, Materials, Processes and Concepts. ATZ Worldwide eMagazines Edn, 2.
Mun, K.-J., Kim, T.-J. and Kim, Y.-S. (2010). Analysis of the roll properties of a tubular-type torsion beam suspension. Proc. IMechE, Part D: J. Automobile Engineering, 224,D1, 1–13.
Prokic, A. (2003). Stiffness method of thin-walled beams with closed cross-section. Computers and Structures, 81, 39–51.
Rajamani, R. (2006). Vehicle Dynamics and Control. Springer. New York.
Reimpell, J., Stoll, H. and Betzler, J. W. (2001). The Automotive Chassis, Engineering Principles. AE Int. and Edward Arnold Publishing.
Reimpell, J., Stoll, H. and Betzler, W. (2001). The Automotive Chassis: Engineering Principles. SAE. Warrendale.
Slivker, V. (2007). Mechanics of Structural Elements, Theory and Applications. Springer Berlin Heidelberg.
Timoshenko, S. (1945). Theory of bending, torsion, and buckling of thin-walled members of open cross section. J. Franklin Inst., 239, 201–219, 249–268, 343–361.
Usuki, T. (2008). Bernoulli a theory for the finite displacement of a thin-walled Euler beam and lateral post-buckling analysis. Proc. R. Soc. A, 464, 1543–1570.
Vlasov, V. Z. (1961). Thin-Walled Elastic Beams, Office of Technical Services. U.S. Department of Commerce. Washington 25. DC. TT-61-11400.
Yeliseyev, V. V. and Orlov, S. G. (1999). Asymptotic splitting in the three-dimensional problem of linear elasticity for elongated bodies with a structure. J. Appl. Math. Mech., 63, 85–92.
Chilver, A. H. (Edn) (1967). Thin-Walled Structures. John Wiley & Sons. New York.
Jönsson, J. and Andreassen, M. J. (2009). Distortional modes of thin-walled beams. 7th EUROMECH Solid Mechanics Conf. Ambrosio, J., Ambriom, J. A. C. and Silva, M. D. T. (Eds) Lisbon, Portugal.
Maple User Manual (1996–2010). Maplesoft, a division of Waterloo Maple Inc.
Potter, P., Holmes, J. and Naturel, J. (2009). Software tool and a new manufacturing process for rear twist beam axles. ATZ — Automobiltechnische Zeitschrift, 111, 10.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kobelev, V.V. Thin-walled rods with semi-open profile for semi-solid automotive suspension. Int.J Automot. Technol. 13, 231–245 (2012). https://doi.org/10.1007/s12239-012-0020-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-012-0020-9