Skip to main content
SpringerLink
Log in

Hybrid laminated composites molded by spray lay-up process

  • Published:
Fibers and Polymers Aims and scope Submit manuscript

Abstract

At current study, several layers were laminated by spray-up method by using the same materials as bath tub products fabrication. The bending properties of laminated plate together with the separated acrylic resin, glass reinforced unsaturated polyester layer (GFRP) layers were investigated by 3 point bending test. And acoustic emission (AE) was measured simultaneously. It is found that GFRP contribute to the high bending modulus and the laminated bonding property is high based on the short beam bending test. Similarly, AE result shows the fracture or delamination were generated with the glass fiber fracture simultaneously which support the conclusion that the laminated fracture did not generated early than other fractures. Finally, the calculation were carried out in order to use recycled jute woven fabric reinforced unsaturated polyester layer (JFRP) instead of GFRP. The bending property of the laminated plate with JFRP was tested as compared with the one consisting GFRP.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. A. K. Bledzki and J. Gassan, Prog. Polym. Sci., 24, 221 (1999).

    Article  CAS  Google Scholar 

  2. S. Carmisciano, I. M. De Rosa, F. Sarasini, A. Tamburrano, and M. Valente, Mater. Des., 32, 337 (2011).

    Article  CAS  Google Scholar 

  3. C. W. Chin and B. F. Yousif, Wear, 267, 1550 (2009).

    Article  CAS  Google Scholar 

  4. S. K. Garkhail, R. W. H. Heijenrath, and T. Peijs, Appl. Compos. Mater., 7, 351 (2000).

    Article  CAS  Google Scholar 

  5. B. F. Yousif and H. Ku, Mater. Des., 36, 847 (2012).

    Article  CAS  Google Scholar 

  6. K. S. Ahmed, S. Vijayarangan, and A. C. B. Naidu, Mater. Des., 28, 2287 (2007).

    Article  CAS  Google Scholar 

  7. A. N. Netravali and S. Chabba, Mater. Today, 6, 22 (2003).

    Article  Google Scholar 

  8. B. V. Ramnath, R. Sharavanan, M. Chandrasekaran, C. Elanchezhian, R. Sathyanarayanan, R. N. Raja, and S. J. Kokan, Fiber. Polym., 16, 164 (2015).

    Article  Google Scholar 

  9. S. Siddika, F. Mansura, M. Hasan, and A. Hassan, Fiber. Polym., 15, 1023 (2014).

    Article  CAS  Google Scholar 

  10. A. Stocchi, B. Lauke, M. I. Giannotti, A. Vazquez, and C. Bernal, Fiber. Polym., 14, 285 (2013).

    Article  CAS  Google Scholar 

  11. N. Venkateshwaran and A. ElayaPerumal, Fiber. Polym., 13, 907 (2012).

    Article  CAS  Google Scholar 

  12. G. M. Shafiur Rahman, M. A. Al Mamun, and M. A. Khan, Fiber. Polym., 15, 340 (2014).

    Article  Google Scholar 

  13. M. R. Rahman, M. M. Huque, M. N. Islam, and M. Hasan, Compos. Pt. A-Appl. Sci. Manuf., 39, 1739 (2008).

    Article  Google Scholar 

  14. K. S. Ahmed and S. Vijayarangan, J. Mater. Process. Technol., 207, 330 (2008).

    Article  CAS  Google Scholar 

  15. K. S. Ahmed, S. Vijayarangan, and C. Rajput, J. Reinf. Plast. Compos., 25, 1549 (2006).

    Article  CAS  Google Scholar 

  16. H. M. Akil, I. M. De Rosa, C. Santulli, and F. Sarasini, Mater. Sci. Eng., 527, 2942 (2010).

    Article  Google Scholar 

  17. S. Thitithanasarn, K. Yamada, U. S. Ishiaku, and H. Hamada, J. Appl. Polym. Sci., 127, 2952 (2013).

    Article  CAS  Google Scholar 

  18. A. Stocchi, L. Colabella, A. Cisilino, and V. Álvarez, Mater. Des., 55, 394 (2014).

    Article  CAS  Google Scholar 

  19. C. Wang, P. Uawongsuwan, Y. Yang, and H. Hamada, Polym. Eng. Sci., 53, 1657 (2013).

    Article  CAS  Google Scholar 

  20. Y. Yang, M. Murakami, and H. Hamada, J. Polym. Environ., 20, 1124 (2012).

    Article  CAS  Google Scholar 

  21. Y. Yang, Y. Yu, T. Ota, Y. Tanaka, R. Nishida, S. Kawabata, and H. Hamada, Polym. Polym. Compos., 19, 197 (2011).

    CAS  Google Scholar 

  22. Y. Yang, T. Ota, T. Morii, and H. J. Hamada, Mater. Sci., 46, 2678 (2011).

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Textile Engineering, College of Textiles, Donghua University, Shanghai, 201620, China

    Bing Xiao & Yuqiu Yang

  2. Key Laboratory of Textile Science & Technology, Ministry of Education, College of Textiles, Donghua University, Shanghai, 201620, China

    Yuqiu Yang

  3. Department of Electronic Engineering, School of Information Science and Technology, Fudan University, Shanghai, 200433, China

    Xiaofeng Wu

  4. Advanced Fibro-science, Kyoto Institute of Technology, Kyoto, 606-8585, Japan

    Mengyuan Liao, Ryuiti Nishida & Hiroyuki Hamada

Authors
  1. Bing Xiao
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yuqiu Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Xiaofeng Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Mengyuan Liao
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Ryuiti Nishida
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Hiroyuki Hamada
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Yuqiu Yang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Xiao, B., Yang, Y., Wu, X. et al. Hybrid laminated composites molded by spray lay-up process. Fibers Polym 16, 1759–1765 (2015). https://doi.org/10.1007/s12221-015-5298-6

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12221-015-5298-6

Keywords

Search

Navigation