Abstract
There is a variety of approaches for investigating bending behavior of woven fabrics. Some of them are based on fabric deformation with one edge fixed; the others are based on measurement of force, moment or energy producing bending deformation. In all methods, bending properties is acquired after testing prepared fabric samples. Therefore, in this work an attempt is made by a mechanical model and a novel calculation technique to determine bending characteristics of the plain woven fabrics before sample production. Theoretical data including bending length, bending rigidity and bending modulus were directly determined for supposed fabric samples with a given yarn count and yarn density using Peirce’s structural model for plain woven fabric and a especial code written in Maple12. Besides, fabric samples with the defined characteristics were woven on a Sulzer-Ruti weaving machine. Then, these fabrics were tested for bending behavior using Shirley bending tester. Comparison showed good agreement between predicted and measured bending characteristics of the fabrics. However, theoretical bending rigidities of the samples were more than experimental values.
Similar content being viewed by others
References
L. Naujokaityte, E. Strazdiene, and L. Fridrichova, Tekstil., 56, 343 (2007).
L. Naujokaityte, E. Strazdiene, and R. Titas, Mater. Sci., 11, 283 (2005).
M. Ghane, M. Sheikhzadeh, and I. Ghaeli, Fibers Text. East. Eur., 17, 51 (2009).
A. Alamdar-Yazdi and Z. Shahbazi, Fibers Text. East. Eur., 14, 50 (2006).
M. Ghane and M. Javadi-Toghchi, “Proceeding of the 1st International and the 7th National Iranian Textile Engineering Conference”, Rasht, Iran, 2009.
P. Szablewski, Autex. Res. J., 4, 206 (2004).
M. Kocik, W. Zurek, I. Krucinska, J. Gersak, and J. Jakubczyk, Fibers Text. East. Eur., 13, 31 (2005).
T. Matsuo, J. Text. Mach. Soc. Jap., 21, 260 (1968).
Standard Test Method for Stiffness of Fabrics, ASTMD1388-96, “Annual Book of ASTM Standards”, International Standards Worldwide, Section Seven, Textile, 2003.
S. P. Timoshenko and J. N. Goodier, “Theory of Elasticity”, 2th ed., pp.41–52, McGraw-Hill Book Company, New York, 1951.
B. George, Jr. Thomas, “Thomas’s Calculus”, 10th ed., pp.416–424, Massachusetts Institute of Technology, 2000.
G. A. V. Leaf and K. H. Kandil, J. Text. Inst., 71, 1 (1980).
W. Zurek, “The Structure of Yarn”, p.206, Foreign Scientific Publication Department of the National Center for Scientific, Technical and Economic Information, Warsaw, Poland, 1975.
J. W. Park and A. G. Oh, Text. Res. J., 76, 478 (2006).
J. W. S. Hearle, “Structural Mechanism of Fiber, Yarn and Fabric”, pp.92–99, 323–333, Cambridge Massachusetts, USA, 1969.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Moghassem, A.R. A new approach for numerical identification of bending behavior of plain woven fabric. Fibers Polym 13, 237–243 (2012). https://doi.org/10.1007/s12221-012-0237-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-012-0237-2