Abstract
Zn phosphinate, organo-modified sepiolite and poly(ethylene terephthalate) (PET) have been melt blended to develop a new flame retardant system for PET plastics and textiles. The combination of Zn phosphinate and sepiolite have been exploited in order to enhance the flame retardancy of PET for both plastics and textiles. The thermal stability of PET blends evaluated by thermogravimetric analysis and differential scanning calorimetry results remarkably affected by the loaded fillers. The combustion tests by cone calorimetry reveal a relevant decrease of combustion rate and a high increase of fire performance index for both plastics and textiles due to the presence of this novel flame retardant mixture. Analogously, limiting oxygen index has been found increased in a remarkable way.
Similar content being viewed by others
References
J. W. Gilman, C. L. Jackson, A. B. Morgan, R. H. Harris, E. Manias, E. P. Giannelis, M. Wuthenow, D. Hilton, and S. H. Phillips, Chem. Mater., 12, 1866 (2000).
M. Zanetti, L. S. Lomakin, and G. Camino, Macromol. Mat. Eng., 279, 1 (2000).
S. S. Ray and M. Okamoto, Prog. Polym. Sci., 28, 1539 (2003) and references quoted in.
L. A. Utracki, M. Sepehr, and E. Boccaleri, Polym. Adv. Technol., 18, 1 (2007).
J. W. Gilman, Appl. Clay Sci., 15, 31 (1999).
J. W. Gilman and T. Kashiwagi, SAMPE J., 33, 40 (1999).
M. Zanetti, G. Camino, and R. Müllhaupt, Polym. Degrad. Stab., 74, 413 (2001).
J. Zhu, F. M. Uhl, A. B. Morgan, and C. A. Wilkie, Chem. Mater., 13, 4649 (2001).
M. Alexandre, G. Beyer, C. Henrist, R. Cloots, A. Rulmont, R. Jerome, and P. Dubois, Macromol. Rapid Commun., 22, 943 (2001).
J. Zhu, P. Start, A. Mauritz, and C. A. Wilkie, Polym. Degrad. Stab., 77, 253 (2002).
A. B. Morgan, R. H. Harris, T. Kashiwagi, L. J. Chyall, and J. W. Gilman, Fire Mater., 26, 247 (2002).
T. Kashiwagi, R. H. Harris, X. Zhang, R. M. Briber, B. H. Cipriano, S. R. Raghavan, W. H. Awad, and J. R. Shields, Polymer, 45, 881 (2004).
. Kashiwagi, E. Grulke, J. Hilding, K. Groth, R. H. Harris, K. Butler, J. Shields, and J. F. Douglas, Polymer, 45, 4227 (2004).
T. Kashiwagi, F. Du, K. I. Winey, K. M. Groth, J. R. Shields, S. P. Bellayer, H. Kim, and J. F. Douglas, Polymer, 46, 471 (2005).
T. Kashiwagi, J. Fagan, J. F. Douglas, K. Yamamoto, A. N. Heckert, S. D. Leigh, J. Obrzut, F. Du, S. L. Gibson, M. Mu, K. I. Winey, and R. Haggenmueller, Polymer, 48, 4855 (2007).
S. Bocchini, A. Frache, G. Camino, and M. Claes, Eur. Polym. J., 43, 3222 (2007).
S. Bocchini, E. Annibale, A. Frache, and G. Camino, epolymer, 020, 1 (2008).
H. Ma, J. Zeng, M. L. Realff, S. Kumar, and D. A. Schiraldi, Compos. Sci. Technol., 63, 1617 (2003).
J. Alongi and A. Frache, e-polymers, 070, 1 (2010).
S. Bourbigot, M. LeBras, F. Dabrowski, J. W. Gilman, and T. Kashiwagi, Fire Mater., 24, 201 (2000).
F. Dabrowski, M. LeBras, L. Cartier, and S. Bourbigot, J. Fire Sci., 19, 219 (2001).
F. Samyn, S. Bourbigot, C. Jama, S. Bellayer, S. Nazare, R. Hull, A. Fina, A. Castrovinci, and G. Camino, Eur. Polym. J., 44, 1631 (2008).
G. Beyer, Fire Mater., 25, 193 (2001).
J. Alongi, M. Poskovic, A. Frache, and F. Trotta, Polym. Degrad. Stab., 95, 2093 (2010).
J. Alongi and A. Frache, Polym. Degrad. Stab., 95, 1928 (2010).
X. G. Ge, D. Y. Wang, C. Wang, M. H. Qu, J. S. Wang, C. S. Zhao, X. K. Jing, and Y. Z. Wang, Eur. Polym J., 43, 2882 (2007).
J. Alongi, A. Frache, and E. Gioffredi, Fire and Mater., In press, doi:10.1002/fam.1060.
Q. F. Zhao, S. Y. Sun, X. W. Jiang, M. H. Qu, and Y. Z. Wang, Adv. Mater. Res., 87–88, 282 (2010).
J. Alongi and A. Frache, e-polymer 70, 1 (2010).
D. Y. Wang, X. Q. Liu, J. S. Wang, Y. Z. Wang, A. A. Stec, and T. R. Hull, Polym. Degrad. Stab., 94, 544 (2009).
S. C. Tjong and S. P. Bao, J. Polym. Sci. Part B: Polym. Phys., 42, 2878 (2004).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Alongi, J. Investigation on flame retardancy of poly(ethylene terephthalate) for plastics and textiles by combination of an organo-modified sepiolite and Zn phosphinate. Fibers Polym 12, 166–173 (2011). https://doi.org/10.1007/s12221-011-0166-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-011-0166-5