Abstract
The paper describes the stress–strain state of a thin plate, which arises during a thermal shock. The central focus of this paper is on a thin plate with one rigidly restrained edge and three free edges. An initial boundary value problem is formulated using a one-dimensional thermal conductivity model. Based on this problem solution, criteria are constructed for using a two-dimensional thermal conductivity model for a more accurate description of the stress–strain state of the plate. The first part of the criteria was obtained from general considerations and is not related to the specifics of the problem being solved. The second part of the criteria takes into account this specificity and can be recommended for use in solving specific problems. The investigation results can be used to describe the stress–strain state of a thin plate under thermal shock.
Similar content being viewed by others
References
Bratsun, D.A., Krasnyakov, I.V., Zyuzgin, A.V.: Active control of thermal convection in a rectangular loop by changing its spatial orientation. Microgravity Sci. Technol. 30(1–2), 43–52 (2018)
Belousova, D.A.,Serdakova, V.V. :Modeling the temperature shock of elastic elements using a one-dimensional model of thermal conductivity. Int. J. Modeling, Simulation, and Scientific Comp. 11(6), 2050060 (2020)
Gaponenko, Y., Gousselnikov, V., Santos, C., Shevtsova, V.: Near-Critical Behavior of fick diffusion coefficient in taylor dispersion experiments. Microgravity Sci. Technol. 31(5), 475–486 (2019)
Gorozhankina, A.S., Orlov, D.I., Belousova, D.A.: Problems of development motion control algorithms for a small spacecraft for technological purpose taking into account temperature deformations of solar panels. J. Phy.: Conf. Series. 1546, 012015 (2020)
Hu, W.R., Zhao, J.F., Long, M., et al.: Space Program SJ–10 of Microgravity Research. Microgravity Sci. Technol. 26(3), 159–169 (2014)
Kartashov, E.M.: A generalized model of a thermal shock to viscoelastic bodies based on the Maxwell and Kelvin rheological models. J. Eng. Phys. Thermophys. 87(2), 277–288 (2014)
Kudinov, I.V., Kudinov, V.A., Kotova, E.V.: Analytic solutions to heat transfer problems on a basis of determination of a front of heat disturbance. Russian Mathematics 60(11), 22–34 (2016)
Lyubimova, T., Zubova, N., Shevtsova, V.: Effects of Non-Uniform Temperature of the Walls on the Soret Experiment. Microgravity Sci. Technol. 31(1), 1–11 (2019)
Orlov, D.I.: Modeling the Temperature Shock Impact on the Movement of a Small Technological Spacecraft, AIP Conference Proceedings. 2340, 050001 (2021)
Shen, Z., Hu, G.: Thermally Induced Dynamics of a Spinning Spacecraft with an Axial Flexible Boom. J. Spacecr. Rocket. 52(5), 1503–1508 (2015)
Shevtsova, V.: Investigation of diffusive and optical properties of vapour-air mixtures: The benefits of interferometry, Elsevier Ltd. (2021)
Sedelnikov, A.V.: Mean of microaccelerations estimate in the small spacecraft internal environment with the use fuzzy sets. Microgravity Sci. Technol. 30(4), 503–509 (2018)
Sedelnikov, A.V., Orlov, D.I.: Development of control algorithms for the orbital motion of a small technological spacecraft with a shadow portion of the orbit. Microgravity Sci. Technol. 32(5), 941–951 (2020)
Sedelnikov, A.V., Orlov, D.I.: Analysis of the significance of the influence of various components of the disturbance from a temperature shock on the level of microaccelerations in the internal environment of a small spacecraft. Microgravity Sci. Technol. 33(2), 22 (2021)
Sedelnikov, A.V., Filippov, A.S., Gorozhakina, A.S.: Problems of data processing of magnetic field of the Earth measuring instruments of the scientific equipment MAGKOM. Instruments and Systems: Monitoring, Control, and Diagnostics 7, 33–40 (2017)
Sedelnikov, A.V., Puzin, Y.Y., Filippov, A.S., Khnyryova, E.S., Ivashova, T.A., Gorozhankina, A.S.: The test of correctness check of magnetometers operation on a small spacecraft AIST flight sample. Instruments and Systems: Monitoring, Control, and Diagnostics 2, 34–39 (2018)
Sedelnikov, A.V.: Control of microaccelerations as the major characteristics of space laboratory of specialized technological appointment as constructive methods. Testing. Diagnistics 7, 57–63 (2014)
Takeuti, Y., Furukawa, T.: Some Considerations on Thermal Shock Problems in a Plate, ASME. J. Appl. Mech. 48(1), 113–118 (1981)
Valishin, A.A., Kartashov, E.M.: Development of the theory of integral transformations for complicated models of unsteady heat transfer. Journal of Advanced Research in Dynamical and Control Systems 11(5), 44–50 (2019)
Weapons and technologies of Russia. XXI Century. Encyclopedia. Vol. 5 Space Weapons / edited by S. Ivanov, Moskow: Arms and Technology publishing house 703 (2002)
Zenkour, A.M., Abouelrega, A.E.: A three-dimensional generalized shock plate problem with four thermoviscoelastic relaxations. Can. J. Phys. 96(8), 938–954 (2018)
Acknowledgements
This work is supported by the Ministry of education and science of the Russian Federation in the framework of the State Assignments to higher education institutions and research organizations in the field of scientific activity (the project FSSS-2020-0017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Sedelnikov, A., Serdakova, V.V. & Khnyryova, E.S. Construction of the Criterion for Using a Two-dimensional Thermal Conductivity Model to Describe the Stress–strain State of a Thin Plate Under the Thermal Shock. Microgravity Sci. Technol. 33, 65 (2021). https://doi.org/10.1007/s12217-021-09912-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12217-021-09912-5