Abstract
A numerical method to efficiently predict heat transfer phenomena of a louver fin radiator was presented — multi-scale semimicroscopic heat exchange (SHE) method. This method consists of microscopic analysis and semimicroscopic analysis. To predict heat transfer characteristics of a louver fin element, the microscopic analysis employs modeling of the detailed geometry of a fin element. Numerical models for the heat transfer rate and flow friction derived from the microscopic analysis are then used for simulations of the full radiator model in semimicroscopic analysis. In the semimicroscopic analysis, conjugate heat transfer is analyzed for the domain with the radiator whose louver fin area is replaced by a porous media. The results with the proposed method show a good agreement with the experimental data. The proposed method can be used to predict flow and heat transfer characteristics of a realistic louver fin radiator with a reduced cost and sufficient accuracy.
Similar content being viewed by others
References
H. S. Kang, Optimum performance and design of a rectangular fin, International Journal of Automotive Technology, 8(6) (2007) 705–711.
A. Witry, Thermal performance of automotive aluminium plate radiator, Applied Thermal Engineering, 25 (2005) 1207–1218.
J. G. Paeng, K. H. Kim and Y. H. Yoon, Experimental measurement and numerical computation of the air side convective heat transfer coefficients in a plate fin-tube heat exchanger, Journal of Mechanical Science and Technology, 23 (2009) 536–543.
C. López del Prá, F. J. S. Velasco and L. E. Herranz, Aerodynamics of a gas jet entering the secondary side of a vertical shell-and-tube exchanger: Numerical analysis of anticipated severe accident SGTR conditions, Engineering Application of Computational Fluid Mechanics, 4(1) (2010) 91–105.
K. Bremhorst and M. Brennan, Investigation of shell and tube heat exchanger tube inlet wear by computational fluid dynamics, Engineering Application of Computational Fluid Mechanics, 5(4) (2011) 566–578.
N.-H. Kim and S.-H. Kim, Dry and wet air-side performance of a louver-finned heat exchanger having flat tubes, Journal of Mechanical Science and Technology, 24(7) (2010) 1553–1561.
K. Yakinthos, D. Missirlis, A. Sideridis, Z. Vlahostergios, O. Seite and A. Goulas, Modelling operation of system of recuperative heat exchangers for aero engine with combined use of porosity model and thermo-mechanical model, Engineering Applications of Computational Fluid Mechanics, 6(4) (2012) 608–621.
C.-T. Hsieh and J.-Y. Jang, 3-D thermal-hydraulic analysis for louver fin heat exchangers with variable louver angle, Applied Thermal Engineering, 26 (2006) 1629–1639.
R. L. Webb and S.-H. Jung, Air-side performance of enhanced brazed aluminium heat exchangers, ASHRAE Winter Meeting, (2002) 391–401.
C. V. Davenport, Correlation for heat transfer and flow friction characteristic of louvered fin, AICHE Symp., 79 (1983) 19–27.
W. M. Kays and A. L. Londom, Compact heat exchanger, 3rd Edition, McGraw-Hill, New York (1984).
Y.-J. Chang and C.-C. Wang, A generalized heat transfer correlation for louver fin geometry, International Journal of Heat and Mass Transfer, 40(3) (1997) 533–544.
Y.-J. Chang, K.-J. Chang, M.-C. Li and C.-C. Wang, An amendment of the generalized friction correlation for louver fin geometry, International Journal of Heat and Mass Transfer, 49 (2006) 4250–4253.
C. H. Song, D.-Y. Lee and T. R. Sung, Cooling enhancement in an air-cooled finned heat exchanger by thin water film evaporation, International Journal of Heat and Mass Transfer, 46(7) (2003) 1241–1249.
T. Perrotin and D. Clodic, Thermal-hydraulic CFD study in louvered fin-and-flat-tube heat exchanger, International Journal of Refrigeration, 27 (2004) 422–432.
N. Vorayos and T. Kiatsiriroat, Thermal characteristics of louvered fins with a low-Reynolds number flow, Journal of Mechanical Science and Technology, 24(4) (2010) 845–850.
C.-T. Hsien and J.-Y. Jang, 3-D thermal-hydraulic analysis for airflow over a radiator and engine room, International Journal of Automotive Technology, 8(5) (2007) 659–666.
D. Jung and D. N. Assanis, Numerical modelling of cross flow compact heat exchanger with louvered fins using thermal resistance concept, SAE, 2006-01-0726 (2006).
N. Hur, J.-T. Park, S. H. Lee, B. Choi and B.-J. Ahn, Development of a semimicroscopic heat exchange (SHE) method for a vehicle underhood thermal management, Progress in Computational Fluid Dynamics, 9(3/4/5) (2009) 141–149.
STAR-CD V4. 14, STAR-CD V4.14 User Guide, CDadapco Group, London (2010).
M. M. A. Bhutta, N. Hayat, M. H. Bashir, A. R. Khan, K. N. Ahmad and S. Khan, CFD applications in various heat exchanger design: A review, Applied Thermal Engineering, 32 (2012) 1–12.
K. Kritikos, C. Albanakis, D. Missirlis, Z. Vlahostergios, A. Goulas and P. Strom, Investigation of the thermal efficiency of a staggered elliptic-tube heat exchanger for aeroengine applications, Applied Thermal Engineering, 30 (2010) 134–142.
A. M. Hayes, J. A. Khan, A. H. Shaaban and I. G. Spearing, The thermal modeling of a matrix heat exchanger using a porous medium and the thermal non-equilibrium model, International Journal of Thermal Science, 47 (2008) 1306–1315.
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Editor Dongshin Shin
Sang Hyuk Lee is a Senior Researcher in the Department of Nuclear Equipment and Machinery Research at Korea Institute of Machinery & Materials. He received his Ph.D. from Sogang University in 2012, and worked as a Post-Doctoral Researcher in Multi-phenomena CFD Engineering Research Center (ERC). Currently, his research interests include multiphysics computational fluid dynamics.
Nahmkeon Hur is a Professor in the Department of Mechanical Engineering of Sogang University in Seoul, Korea and a director of Multi-phenomena CFD Engineering Research Center (ERC) funded by National Research Foundation of Korea. He received his Ph.D. from Stevens Institute of Technology in 1988. His research interests include multiphysics and multidynamics CFD and its application.
Seongwon Kang is an Assistant Professor in the Department of Mechanical Engineering at Sogang University. He received his Ph.D. from Stanford University in 2008 and joined Sogang University in 2010. His research interests include numerical methods for a complex geometry and turbulent flows with combustion.
Rights and permissions
About this article
Cite this article
Lee, S.H., Hur, N. & Kang, S. An efficient method to predict the heat transfer performance of a louver fin radiator in an automotive power system. J Mech Sci Technol 28, 145–155 (2014). https://doi.org/10.1007/s12206-013-0951-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-013-0951-8