Abstract
The purpose of this study is to investigate the effect of the changes in the tempering temperature on the hydrogen-delayed fracture resistance of high strength spring steel. The specimens with various microstructures are produced by differentiating the tempering temperature range, their mechanical characteristics are evaluated, and an impact test is carried out. The correlation with the change in mechanical properties is studied through the analysis of the microstructures with a scanning electron microscope. Hydrogen is forcefully injected inside the notched specimen electrochemically, and the hydrogen-delayed fracture resistance is evaluated using a constant loading test. The fractography of the fractured specimen is observed, and through a thermal desorption spectrometer analysis, the main trapping site of the diffusible hydrogen is investigated. The diffusible hydrogen in high strength spring steel is primarily trapped in dislocation, and the hydrogen-delayed fracture resistance increased depending on the increase in the tempering temperature.
Similar content being viewed by others
References
H. Kawakami, Y. Yamada, S. Aahida and K. Shiwaku, Effect of chemical composition on sag resistance of suspension spring, SAE Paper, No.820128 (1982).
G. Krauss and S. W. Thompson, Ferritic microstructures in continuously cooled low-and ultralow-carbon steels, ISIJ Int., 35(8) (1995) 937–945.
C. E. Price and R. G. Norman, A comparison of hydrogen and mercury embrittlement in aisi 4142 steel, Acta Met., 35 (1987) 1639–1948.
M. Wang, E. Akiyama and K. Tsuzaki, Hydrogen degradation of a boron-bearing steel with 1050 and 1300MPa strength levels, Scr. Mater., 52 (2005) 403–408.
S. Yamasaki, M. Kubota and T. Tarui, Evaluation method for delayed fracture susceptibility of steels and development of high tensile strength steels with high delayed fracture resistance, Nippon Steel Tech. Rep. 80 (1999) 50–55.
H. Hargi, Y. Hayashi and N. Ohtani, Diffusion coefficient of hydrogen in pure iron between 230 and 300 K, Trans, JIM., 20 (1979) 349–357.
W. Y. Choo and J. Y. Lee, Thermal analysis of trapped hydrogen in pure iron, Met. Trans. A, 13A (1982) 135–140.
J. P. Hirth, Effects of hydrogen on the properties of iron and steel, Metall. Trans. A, 11A (1980) 861–890.
T. Zhang, W. Y. Chu, K. W. Gao and L. J. Qiao, Study of correlation between hydrogen-induced stress and hydrogen embrittlement, Mater. Sci. Eng. A., 347 (2003) 291–299.
L. J. Qiao, J. L. Luo and X. Mao, Hydrogen evolution and enrichment around stress corrosion crack tips of pipeline steels in dilute bicarbonate solution, Corrosion, 54(2) (1998) 115–120.
D. Hardie and S. Liu, The effect of stress concentration on hydrogen embrittlement of a low alloy steel, Corr. Sci., 38(5) (1996) 721–733.
W. J. Nam and H. C. Choi, Effect of Si on mechanical properties of low alloy steels, Mater. Sci. Tech., 15(5) (1999) 527–530.
G. Thomas, Retained austenite and tempered martensite embrittlement, Metall. Trans. A, 9(3) (1978) 439–450.
G. R. Speich and W. C. Leslie, Tempering of steel, Matall. Trans., 3 (1972) 1043–1054.
D. Kuron, Wasserstoff und Korrosion, Bonner Studienreihe, Bd. 3 (1986).
I. Maroef, D. L. Olson, M. Eberchart and G. R. Edwards, Hydrogen trapping in ferritic steel weld metal, Int. Mat. Reviews, 47(4) (2002) 191–223.
T. Yamaguchi and M. Nagumo, Simulation of hydrogen thermal desorption under reversible trapping by lattice defects, ISIJ Int., 43(4) (2003) 514–519.
K. Ichitani, M. Kanno and S. Kuramoto, Recent development in hydrogen microprint technique and its application to hydrogen embrittlement, ISIJ Int., 43(4) (2003) 496–504.
H. E. Kissinger, Reaction kinetics in differential thermal analysis, Anal. Chem., 29 (1957) 1702–1706.
K. Ono and M. Meshii, Hydrogen detrapping from grain boundaries and dislocations in high purity iron, Acta Metal. Mater., 40(6) (1992) 1357–1364.
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Guest Editor Haedo Jeong
Yong-Jun Lee received his M.S. degree from Graduate School of Pusan National University, Korea. He is currently in the doctoral course of the Graduate School of Pusan National University, Korea. Mr. Lee’s research interests include heat treatment and fatigue strength evaluation.
Sung-Su Kang is currently a Professor a Department of Mechanical Engineering at Pusan National University, Korea. His research interests include plastic working process, mechanical metallurgy, heat treatment and welding.
Rights and permissions
About this article
Cite this article
Lee, YJ., Park, JH., Lee, DH. et al. Effect of heat treatment on the hydrogen delayed fracture of high strength spring steel. J Mech Sci Technol 27, 2991–2996 (2013). https://doi.org/10.1007/s12206-013-0815-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-013-0815-2