Abstract
The influence of structural configuration on vibration responses of smart laminated beams under random loading is studied. The effect of laminate configurations and locations of sensors/actuators in the smart system is also investigated. The layer-wise approximation for displacement and electric potential is utilized to construct the finite element model. The closed-loop control response is determined through an optimal control algorithm based on the Linear Quadratic Regulator (LQR). The correlation coefficient between the input random force and the applied actuating voltage for various configurations is also computed. It is revealed that for softer configurations, the correlation coefficient is higher than that for harder configurations. The study on the effect of sensor/actuator collocation pairs on optimal vibration control reveals that as the actuator shifts away from the sensor location, the peak of power occurs at higher frequency and becomes more distributed through all the frequencies in the domain.
Similar content being viewed by others
References
D. M. Frangopol and S. Recek, Reliability of Reinforced Composite Laminated Plates, Probab. Eng. Mech., 18 (2003) 119–137.
L. Librescu and I. Elishakoff, Response of Laminated Plates to Non-stationary Random Excitation, Struct. Saf., 6 (1998) 99–113.
G. Cederbaum, L. Librescu and I. Elishakoff, Random Vibration of Laminated Plates Modeled Within the First-order Shear Deformation Theory, Compos. Struct., 12 (1989) 97–111.
J. Kang and R. S. Harichandran, Random Vibration of Laminated FRP Plates with Material Nonlinearity using Higher-order Shear Theory, J. Eng. Mech., 125(9) (1999) 1081–1088.
P., Dash, B.N., Singh, Nonlinear free vibration of piezoelectric laminated composite plate, Finite Elem. Anal. Des., 45(10) (2009) 686–694.
D. H. Robbins and J. N. Reddy, Analysis of piezoelectrically actuated beams using a layer-wise displacement theory, Compos.. Struct., 41(2) (1991) 265–279.
A. Zabihollah, R. Sedagahti and R. Ganesan, Active vibration suppression of smart laminated beams using layer-wise theory and optimal control strategy, Smart Mater. Struct., 16 (2007) 1–12.
S. Narayanana and V. Balamurugan, Finite Element Modeling of Piezo-laminated Smart Structures or Active Vibration Control with Distributed Sensors and Actuators, J. Sound Vib., 262 (2003) 529–562.
I. Bruant, G. Coffigal, F. Lene and M. Verge, A methodology for determination of piezoelectric actuator and sensor location on beam structures, J. Sound Vib., 243(5) (2001) 861–882.
C. M. A. Vasques and J. D. Rodrigues, Active vibration control of smart piezoelectric beams: Comparison of classical and optimal feedback control strategies, Comput. Struct., 84(22–23) (2006) 1402–1414.
M. Levent, Integration of active vibration control methods with finite element models of smart laminated composite structures, Compos. Struct., 92 (2010) 1651–1663.
C. Y. Yang, Random Vibration of Structures, John Wiley and Sons Inc., New York, (1986).
D. Subbaram Naidu, Optimal Control Systems, CRC Press, USA, (2003).
R. H. Lyon, Random Noise and Vibration in Space Vehicles, Shock and Vibration Information Center, U.S. Dept. of Defense, Washington, (1967).
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper was recommended for publication in revised form by Associate Editor Eung-Soo Shin
A. Zabihollah received his Ph.D. in mechanical engineering from Concordia University, Montreal, Canada in 2007. He is the author of over 25 publications on smart structures, vibration suppression, and design optimization. Dr. Zabihollah is currently working at the international campus of Sharif University of Technology on Kish Island.
Rights and permissions
About this article
Cite this article
Zabihollah, A. Effects of structural configuration on vibration control of smart laminated beams under random excitations?. J Mech Sci Technol 24, 1119–1125 (2010). https://doi.org/10.1007/s12206-010-0304-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-010-0304-9