Abstract
Galling is a known failure mechanism in sheet metal forming operations, and it can lead to fracture of the products and jamming of the tool. The temperature field and normal contact pressure distributions of the tool and the blank were studied with a finite element analysis model under the action of different blank holder force and frictional coefficient. A series of forming tests of the high strength steel were conducted to validate the finite element model. The characteristics of galling failure, the damaged surface of the product and the adhesive wear of the tool, were analyzed during the forming process. The results demonstrate that die corner is the region where temperature and normal contact pressure are high and galling failure initiates. The blank surface passing through the die corner usually has the galling problem. The blank holder force and the tool surface topography have strong effects on the galling behavior in sheet metal forming processes. The methodology using finite element analysis to predict galling failure behavior can be used to perform parametric and material studies on the galling failure.
Similar content being viewed by others
References
Heide E V, Veld A J, Schipper D J. The effect of lubricant selection on galling in a model wear test [J]. Wear, 2001, 251(1): 973–979.
Podgornik B, Vizintin J, Hogmark S. Improvement in galling performance through surface engineering [J]. Surface Engineering, 2006, 22(2): 235–238.
Podgornik B, Hogmark S. Surface modification to improve friction and galling properties of forming tools [J]. Journal of Materials Processing Technology, 2006, 174(3): 334–341.
Kim H Y, Hwang B C, Bae W B. An experimental study on forming characteristics of pre-coated sheet metals [J]. Journal of Materials Processing Technology, 2002, 120(2): 290–295.
Yuan G J, Yao Z Q, Wang Q H, et al. Numerical and experimental distribution of temperature and stress fields in API round threaded connection [J]. Engineering Failure Analysis, 2006, 13(8): 1275–1284.
Heide E V, Schipper D J. Galling initiation due to frictional heating [J]. Wear, 2003, 254(11): 1127–1133.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hou, Yk., Yu, Zq. & Li, Sh. Galling failure analysis in sheet metal forming process. J. Shanghai Jiaotong Univ. (Sci.) 15, 245–249 (2010). https://doi.org/10.1007/s12204-010-8007-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12204-010-8007-z