Abstract
The ultrafine poly (sodium 4-styrenesulfonate) (NaPSS) fibres have been prepared for the first time by electrospinning. The spinning solutions (NaPSS aqueous solutions) in varied concentrations were studied for electrospinning into ultrafine fibres. The results indicated that the smooth fibre could be formed when the concentration of NaPSS was above 40 wt.%. The morphology of the fibres was shown by scanning electron microscope (SEM). The Fourier transform infrared spectroscopy (FTIR) indicated that the structure of NaPSS did not change after electrospinning.
References
Fong H, Chun I and Reneker D H 1999 Polymer 40 4585
Gupta P, Elkins C, Long T E and Wilkes G L 2005 Polymer 46 4799
Huang Z M, Zhang Y Z, Kotakic M and Ramakrishna S 2003 Compos. Sci. Technol. 63 2223
Kim B, Park H, Lee S H and Sigmund W M 2005 Mater. Lett. 59 829
Lannutti J, Reneker D, Ma T, Tomasko D and Farson D 2007 Mater. Sci. Eng. C27 504
Ohkawa K, Cha D, Kim H, Nishida A and Yamamoto H 2004 Macromol. Rapid Commun. 25 1600
Park W H, Jeong L, Yoo D I and Hudson S 2004 Polymer 45 7151
Son W K, Youk J H, Lee T S and Park W H 2005 Mater. Lett. 59 1571
Xia Y, Yang P, Sun Y, Wu Y, Mayers B, Gates B, Yin Y, Kim F and Yan H 2003 Adv. Mater. 15 353
Yang J C, Jablonsky M J and Mays J W 2002 Polymer 43 5125
Zhou H J, Green T B and Joo Y L 2006 Polymer 47 7497
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
XU, J., CUI, X., WANG, H. et al. Preparation of ultrafine poly(sodium 4-styrenesulfonate) fibres via electrospinning. Bull Mater Sci 34, 531–533 (2011). https://doi.org/10.1007/s12034-011-0111-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12034-011-0111-7