Abstract
The paper gives an insight into basic as well as applied research being carried out at the Indira Gandhi Centre for Atomic Research for the development of advanced materials for sodium cooled fast reactors towards extending the life of reactors to nearly 100 years and the burnup of fuel to 2,00,000 MWd/t with an objective of providing fast reactor electricity at an affordable and competitive price.
Similar content being viewed by others
References
Albert S K, Tabuchi M, Hongo H, Watanabe T, Kubo K and Matsui M 2005 Sci. & Technol. Weld. & Join. 10 149
Alizadeh A, Taheri-Nassaj E and Ehsani N 2004 J. Eur. Ceram. Soc. 24 3227
Anand R, Sudha C, Karthikeyan T, Saroja S, Terrance A L E and Vijayalakshmi M 2006 Proc. of the first south-east Asia international institute of welding congress (Bangkok, Thailand: Welding Institute of Thailand)
Anish Kumar, Jayakumar T, Baldev Raj and Ray K K 2003 Mater. Sci. & Engg. A362 58
Antony M P, Daniel J and Mathews C K 1997 Nucl. Technol. 117 299
Anthonysamy S, Vasudeva Rao P R and Mathews C K 1989 Proceedings of international symposium on thermochemistry and chemical processing (Kalpakkam: IGCAR) p. 319
Baldev Raj, Moorthy V, Jayakumar T and Bhanu Sankara Rao K 2003 Int. Mater. Rev. 48 273
Baldev Raj, Vijayalakshmi M, Sivaprasad P V, Panigrahi B K and Amarendra G 2008 Proceedings of the 29th Risø international symposium on energy materials — Advances in characterization, modelling and application (eds) N H Andersen et al (Risø: DTU)
Bhaduri A K et al 2003 Proc. seminar, Materials R&D for PFBR (eds) S L Mannan and M D Mathew (Kalpakkam: Indian Institute of Metals) pp. 263–277
David C et al 2008 J. Nucl. Mater. 383 132
Day D E, Wu Z, Ray C S and Hrma P 1998 J. Non-Cryst. Solids 241 1
Ganguly C and Sengupta A K 1988 J. Nucl. Mater. 158 159
Gnanasekaran T and Mathews C K 1986 J. Nucl. Mater. 140 202
Gnanasekaran T, Mahendran K H, Kutty K V G and Mathews C K 1989 J. Nucl. Mater. 165 210
Govindan Kutty K V et al 2006 in Nuclear fuel cycle technologies — Closing the fuel cycle (eds) Baldev Raj and P R Vasudeva Rao (Mumbai: BRNS) pp. 341–350
Hoeller P 1987 in Non-destructive characterization of materials II (eds) J F Bussiere et al (Berlin: Springer-Verlag) p. 101
Hori M 1980 Atomic Energy Review 18 707
Jayaraman V, Krishnamurthy D, Ganesan R, Thiruvengadasami A, Sudha A, Prasad M V R and Gnanasekaran T 2007 Ionics 13 299
Joseph K, Govindan Kutty K V, Chandramohan P and Vasudeva Rao P R 2009 J. Nucl. Mater. 384 262
Joseph K, Sujatha K, Nagaraj S, Mahendran K H, Sridharan R, Periaswami G and Gnanasekaran T 2005 J. Nucl. Mater. 344 285
Kandan R, Babu R and Nagarajan K 2004 J. Nucl. Mater. 324 215
Karthikeyan T, Saroja S, Vijayalakshmi M and Murthy K P N 2007 Frontiers in the design of materials (Hyderabad: Universities Press (India) Private Limited) pp. 109–120
Kohyama A et al 1996 J. Nucl. Mater. 233–237 138
Lutze W and Ewing R C 1988 Radioactive waste forms for the future (Amsterdam: North-Holland)
Mahendran K H, Sridharan R, Gnanasekaran T and Periaswami G 1998 Ind. Eng. Chem. Res. 37 1398
Mathews C K and Borgstedt H U 1987 Applied chemistry alkali metals (New York: Plenum Press)
Murali D, Panigrahi B K, Valsakumar M C, Sundar C S and Baldev Raj 2009 Appl. Phys. Letts (submitted)
Nagendran R et al 2007 IEEE Trans. Appl. Supercond. 17 3824
Perez Jr J M et al 2001 Pacific Northwest National Laboratory Report, PNNL-13582
Periaswami G 1988 Electrochemical studies related to the development of on-line meters for use in liquid sodium, Ph D Thesis, University of Madras, Chennai
Prabhu E, Jayaraman V, Gnanasekar K I, Gnanasekaran T and Periaswami G 2005 Asian J. Phys. 14 33
Rajan Babu V, Govindarajan S and Chetal S C 1996 Proc. of seminar on inherent engineered safety aspects of PFBR design (Kalpakkam: IGCAR)
Rajkumar K V et al 2006 Comprehensive characterization of ageing behaviour in M250 maraging steel using multi-NDE techniques. Proc. 9th European conf. on NDT, Berlin (www.ndt.net/article/ecndt2006/doc/Fr.1.7.1.pdf)
Rao B P C, Jayakumar T, Baldev Raj and Arnold W 2001 J. Non-destructive Eval. 21 38
Riyas A and Mohanakrishnan P 2008 Ann. Nucl. Energy 35 87
Sai Baba M, Vana Varamban S and Mathews C K 1987 J. Nucl. Mater. 144 56
Sengupta A K, Goswami G L, Garg S P, Sayi Y S, Radhakrishna J and Sood D D 1986 in Proceedings of the seminar on fast reactor fuel cycle (Kalpakkam: IGCAR) Vol. 1, p. 50
Sengupta A K, Banerjee J, Jarvis T, Kutty T R G, Ravi K and Majumdar S 2003 Nucl. Technol. 142 260
Sreedharan O M, Madan B S and Gnanamoorthy J B 1983 J. Nucl. Mater. 119 296
Sridharan R, Gnanasekaran T and Mathews C K 1993 J. Alloys & Compd. 191 9
Subramanian C and Suri A K 2004 Metals, Mater. & Process. 16 39
Sudha C, Thomas Paul V, Terrance A L E, Saroja S and Vijayalakshmi M 2006 Weld. Res. Suppl. 85 71
Venkiteswaran C N et al 2007 International symposium on advances in stainless steels (eds) Baldev Raj et al (New Delhi: Allied Publishers Ltd)
Wang S X, Begg B D, Wang L M, Ewing R C, Weber W J and Govindan Kutty K V 1999 J. Mater. Res. 14 4470
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Raj, B. Materials science research for sodium cooled fast reactors. Bull Mater Sci 32, 271–283 (2009). https://doi.org/10.1007/s12034-009-0041-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12034-009-0041-9