Skip to main content

Advertisement

Log in

Post-anodization methods for improved anticorrosion properties: a review

  • Review Article
  • Published:
Journal of Coatings Technology and Research Aims and scope Submit manuscript

Abstract

Anodization is a prominent surface treatment for light alloys that has been successfully used in the industry for the last two decades as it provides effective corrosion and wear protection. However, anodic films have porous structures, and the period of corrosion protection is limited by the nature of anodic pores, through which corrosive species may enter and reach the substrate surface. To seal the anodic porous layer, various post-anodization treatments have been developed. The most commonly employed post-treatments are the layered double hydroxide (LDH), sol–gel, hydrothermal, and cerium-based methods. Recent research revealed that after applying these post-treatments to various anodized magnesium alloys, the corrosion resistance of the resulting coatings is sufficiently enhanced because the post-layers seal the pores in the anodic thin films. This article reviews the recent research progress regarding post-anodization coatings formed on anodized magnesium alloys. Furthermore, the corrosion protection performance and microstructural changes of the resulting coatings are elucidated. The LDH method was found to be the most beneficial sealing treatment, as the treated anodized specimens demonstrated excellent corrosion resistance and a significant self-healing effect. In contrast, less satisfactory protection properties were obtained using the sol–gel, hydrothermal, and cerium-based sealing methods.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  1. Chen, XB, Birbilis, N, Abbott, TB, “Review of Corrosion-Resistant Conversion Coatings for Magnesium and Its Alloys.” Corrosion, 67 (3) 1–16 (2011)

    Google Scholar 

  2. Atrens, A, Song, G-L, Liu, M, Shi, Z, Cao, F, Dargusch, MS, “Review of Recent Developments in the Field of Magnesium Corrosion.” Adv. Eng. Mater, 17 (4) 400–453 (2015)

    CAS  Google Scholar 

  3. Borislov, AM, Krit, BL, Lyudin, VB, Morozova, NV, et al., “Microarc Oxidation in Slurry Electrolytes: A Review.” Surf. Eng. Appl. Electrochem, 52 50–78 (2016)

    Google Scholar 

  4. Song, GL, Shi, Z, “Corrosion Prevention of Magnesium Alloys.” In: Song, G-L (ed.) Anodization and Corrosion of Magnesium (Mg) Alloys, pp. 238–281. Woodhead Publishing Limited, UK (2013)

    Google Scholar 

  5. Song, GL, Shi, Z, “Corrosion Mechanism and Evaluation of Anodized Magnesium Alloys.” Corros. Sci., 85 126–140 (2014)

    CAS  Google Scholar 

  6. Hornberger, H, Virtanen, S, Boccaccini, AR, “Biomedical Coatings on Magnesium Alloys–A Review.” Acta Biomater., 8 2442–2455 (2012)

    CAS  Google Scholar 

  7. Blawert, C, Dietzel, W, Ghali, E, Song, G, “Anodizing Treatments for Magnesium Alloys and Their Effect on Corrosion Resistance in Various Environments.” Adv. Eng. Mater., 8 511–533 (2006)

    CAS  Google Scholar 

  8. Shi, Z, Song, G, Atrens, A, “Influence of Anodizing Current on the Corrosion Resistance of Anodized AZ91D Magnesium Alloy.” Corros. Sci., 48 1939–1959 (2006)

    CAS  Google Scholar 

  9. Shi, Z, Song, G, Atrens, A, “Corrosion Resistance of Anodized Single-Phase Mg Alloy.” Surf. Coat. Technol., 201 492–503 (2006)

    CAS  Google Scholar 

  10. Guo, HF, An, MZ, Huo, HB, Xu, S, “Microstructure Characteristic of Ceramic Coatings Fabricated on Magnesium Alloys by Micro-Arc Oxidation in Alkaline Silicate Solutions.” Appl. Surf. Sci., 252 7911–7916 (2006)

    CAS  Google Scholar 

  11. Barati Darband, G, Aliofkhazraei, M, Hamghalam, P, Valizade, N, “Plasma Electrolytic Oxidation of Magnesium and Its Alloys: Mechanism, Properties and Applications.” J. Magnes. Alloy., 5 74–132 (2017)

    CAS  Google Scholar 

  12. Lu, X, Mohedano, M, Blawert, C, Matykina, E, et al., “Plasma Electrolytic Oxidation Coatings with Particle Additions—A Review.” Surf. Coat. Technol., 307 1165–1182 (2016)

    CAS  Google Scholar 

  13. Vladimirov, BV, Krit, BL, Lyudin, VB, Morozova, NV, et al., “Microarc Oxidation of Magnesium Alloys: A Review.” Surf. Eng. Appl. Electrochem., 50 (3) 195–232 (2014)

    Google Scholar 

  14. Chu, CL, Han, X, Xue, F, Bai, J, et al., “Effects of Sealing Treatment on Corrosion Resistance and Degradation Behavior of Micro-Arc Oxidized Magnesium Alloy Wires.” Appl. Surf. Sci., 271 271–275 (2013)

    CAS  Google Scholar 

  15. Malayoglu, U, Tekin, KC, Shrestha, S, “Influence of Post-Treatment on the Corrosion Resistance of PEO Coated AM50B and AM60B Mg Alloys.” Surf. Coat. Technol., 205 1793–1798 (2010)

    CAS  Google Scholar 

  16. Ivanou, DK, Starykevich, M, Lisenkov, AD, Zheludkevich, ML, et al., “Plasma Anodized ZE41 Magnesium Alloy Sealed with Hybrid Epoxy-Silane Coating.” Corros. Sci., 73 300–308 (2013)

    CAS  Google Scholar 

  17. Mingo, B, Arrabal, R, Mohedano, M, Llamazares, Y, Matykina, E, Yerokhin, A, “Influence of Sealing Post Treatments on the Corrosion Resistance of PEO Coated AZ91 Magnesium Alloy.” Appl. Surf. Sci., 433 653–667 (2018)

    CAS  Google Scholar 

  18. Zhang, R, Wang, F, Hu, C, Li, W, “Research Progress in Sealing Treatment of Anodic Coatings Formed on Magnesium Alloys.” J. Mater. Eng, 11 (2007)

  19. Zhang, G, Wu, L, Tang, A, Weng, B, et al., “Sealing of Anodized Magnesium Alloy AZ31 with MgAl Layered Double Hydroxides Layers.” RSC Adv., 8 2248–2259 (2018)

    CAS  Google Scholar 

  20. Chang, L, Tian, L, Liu, W, Duan, X, “Formation of Dicalcium Phosphate Dihydrate on Magnesium Alloy by Micro-Arc Oxidation Coupled with Hydrothermal Treatment.” Corros. Sci., 72 118–124 (2013)

    CAS  Google Scholar 

  21. Shi, P, Ng, WF, Wong, MH, Cheng, FT, “Improvement of Corrosion Resistance of Pure Magnesium in Hanks’ Solution by Microarc Oxidation with Sol–Gel TiO2 Sealing.” J. Alloys Comput., 469 286–292 (2009)

    CAS  Google Scholar 

  22. Lamaka, SV, Knörnschild, G, Snihirova, DV, Taryba, MG, et al., “Complex Anticorrosion Coating for ZK30 Magnesium Alloy.” Electrochim. Acta, 55 131–141 (2009)

    CAS  Google Scholar 

  23. Guo, X, Du, K, Guo, Q, Wang, Y, et al., “Experimental Study of Corrosion Protection of a Three-Layer Film on AZ31B Mg Alloy.” Corros. Sci., 65 367–375 (2012)

    CAS  Google Scholar 

  24. Dong, Q, Ba, Z, Jia, Y, Chen, Y, et al., “Effect of Solution Concentration on Sealing Treatment of Mg-Al Hydrotalcite Film on AZ91D Mg Alloy.” J. Magnesium Alloys, 5 320–325 (2017)

    CAS  Google Scholar 

  25. Tedim, J, Zheludkevich, ML, Bastos, AC, Salak, AN, et al., “Influence of Preparation Conditions of Layered Double Hydroxide Conversion Films on Corrosion Protection.” Electrochimica Acta, 117 164–171 (2014)

    CAS  Google Scholar 

  26. Wu, L, Yang, D, Zhang, G, Zhang, Z, Zhang, S, Tang, A, Pan, F, “Fabrication and Characterization of Mg-M Layered Double Hydroxide Films on Anodized Magnesium Alloy AZ31.” Appl. Surf. Sci., 431 177–186 (2018)

    CAS  Google Scholar 

  27. Zheludkevich, ML, Poznyak, SK, Rodrigues, LM, Raps, D, Hack, T, Dick, LF, Nunes, T, Ferreira, MGS, “Active Protection Coatings with Layered Double Hydroxide Nanocontainers of Corrosion Inhibitor.” Corros. Sci., 52 (2) 602–611 (2010)

    CAS  Google Scholar 

  28. Zheludkevich, ML, Tedim, J, Ferreira, MGS, “Smart Coatings for Active Corrosion Protection Based on Multi-Functional Micro and Nanocontainers.” Electrochim. Acta, 82 314–323 (2012)

    CAS  Google Scholar 

  29. Dou, B, Wang, Y, Zhang, T, Liu, B, et al., “Growth Behaviors of Layered Double Hydroxide on Microarc Oxidation Film and Anti-Corrosion Performances of the Composite Film.” J. Electrochem. Soc., 163 (14) 917–927 (2016)

    Google Scholar 

  30. Chen, F, Yu, P, Zhang, Y, “Healing Effects of LDHs Nanoplatelets on MAO Ceramic Layer of Aluminum Alloy.” J. Alloys Comput., 711 342–348 (2017)

    CAS  Google Scholar 

  31. Evans, DE, Slade, RCT, Structural Aspects of Layered Double Hydroxides, in Structure & Bonding, Vol. 119, pp. 1–87. Springer, Berlin (2005)

    Google Scholar 

  32. Tedim, J, Zheludkevich, ML, Salak, AN, Lisenkov, A, Ferreira, MGS, “Nanostructured LDH-Container Layer with Active Protection Functionality.” J. Mater. Chem., 21 15464–15470 (2011)

    CAS  Google Scholar 

  33. Laleh, M, Kargar, F, Rouhaghdam, AS, “Investigation of Rare Earth Sealing of Porous Micro-Arc Oxidation Coating Formed on AZ91D Magnesium Alloy.” J. Rare Earths, 30 (12) 1293–1297 (2012)

    CAS  Google Scholar 

  34. Zhang, G, Wu, L, Tang, A, Zhang, S, Yuan, B, Zheng, Z, Pan, F, “A Novel Approach to Fabricate Protective Layered Double Hydroxide Films on the Surface of Anodized Mg-Al Alloy.” Adv. Mater. Interfaces, 4 1700163 (2017)

    Google Scholar 

  35. Hang, TTX, Truc, TA, Duong, NT, Vu, PG, Hoang, T, “Preparation and Characterization of Nanocontainers of Corrosion Inhibitor Based on Layered Double Hydroxides.” Appl. Clay Sci., 67–68 18–25 (2012)

    Google Scholar 

  36. Zhang, G, Wua, L, Tang, A, Chen, XB, et al., “Growth Behavior of MgAl-Layered Double Hydroxide Films by Conversion of Anodic Films on Magnesium Alloy AZ31 and Their Corrosion Protection.” Appl. Surf. Sci., 456 419–429 (2018)

    CAS  Google Scholar 

  37. Chen, J, Lin, W, Liang, S, Zou, L, et al., “Effect of Alloy Cations on Corrosion Resistance of LDH/MAO Coating on Magnesium Alloy.” Appl. Surf. Sci., 463 535–544 (2019)

    CAS  Google Scholar 

  38. Li, Y, Li, S, Zhang, Y, Yu, M, Liu, J, “Enhanced Protective Zn–Al Layered Double Hydroxide Film Fabricated on Anodized 2198 Aluminum Alloy.” J. Alloys Comput., 630 29–36 (2015)

    CAS  Google Scholar 

  39. Zhang, G, Wu, L, Tang, A, Ma, Y, et al., “Active Corrosion Protection by a Smart Coating Based on a MgAl-Layered Double Hydroxide on a Cerium-Modified Plasma Electrolytic Oxidation Coating on Mg Alloy AZ31.” J. Corros. Sci., 139 370–382 (2018)

    CAS  Google Scholar 

  40. Shi, H, Liu, F, Han, E, “Corrosion Behaviour of Sol–Gel Coatings Doped with Cerium Salts on 2024-T3 Aluminum Alloy.” Mater. Chem. Phys., 124 291–297 (2010)

    CAS  Google Scholar 

  41. Wang, H, Akid, R, Gobara, M, “Scratch-Resistant Anticorrosion Sol–Gel Coating for the Protection of AZ31 Magnesium Alloy via a Low Temperature Sol–Gel Route.” Corros. Sci., 52 2565–2570 (2010)

    CAS  Google Scholar 

  42. Hu, J, Zhang, C, Cui, B, Bai, K, “In Vitro Degradation of AZ31 Magnesium Alloy Coated with Nano TiO2 Film by Sol–Gel Method.” Appl. Surf. Sci., 257 8772–8777 (2011)

    CAS  Google Scholar 

  43. Hu, RG, Zhang, S, Bu, JF, Lin, ChJ, Song, GL, “Recent Progress in Corrosion Protection of Magnesium Alloys by Organic Coatings.” Prog. Org. Coat., 73 129–141 (2012)

    CAS  Google Scholar 

  44. Druart, ME, Richir, JB, Poirier, C, Maseri, F, et al., “Influence of Sol–Gel Application Conditions on Metallic Substrate for Optical Applications.” Corros. Eng. Sci. Technol., 46 677–684 (2011)

    Google Scholar 

  45. Ivanou, DK, Yasakau, KA, Kallip, S, Lisenkov, AD, et al., “Active Corrosion Protection Coating for ZE41 Magnesium Alloy Created by Combining PEO and Sol–Gel Techniques.” Royal Soc. Chem., 6 12553–12560 (2016)

    CAS  Google Scholar 

  46. Capelossi, VR, Poelman, M, Recloux, I, Hernandez, RPB, et al., “Corrosion Protection of Clad 2024 Aluminum Alloy Anodized in Tartaric-Sulfuric Acid Bath and Protected with Hybrid Sol–Gel Coating.” Electrochim. Acta, 124 69–79 (2014)

    CAS  Google Scholar 

  47. Castellanos, A, Altube, A, Vega, JM, García-Lecina, E, et al., “Effect of Different Post-Treatments on the Corrosion Resistance and Tribological Properties of AZ91D Magnesium Alloy Coated PEO.” Surf. Coat. Technol., 278 99–107 (2015)

    CAS  Google Scholar 

  48. Zheng, X, Liu, Q, Ma, H, Das, S, et al., “Probing Local Corrosion Performance of Sol–Gel/MAO Composite Coating on Mg Alloy.” Surf. Coat. Technol., 347 286–296 (2018)

    CAS  Google Scholar 

  49. Shang, W, Chen, B, Shi, X, Chen, Y, Xiao, X, “Electrochemical Corrosion Behavior of Composite MAO/Sol–Gel Coatings on Magnesium Alloy AZ91D Using Combined Micro-Arc Oxidation and Sol–Gel Technique.” J. Alloys Comput., 474 (1–2) 541–545 (2009)

    CAS  Google Scholar 

  50. Zhang, Y, Bai, K, Fu, Z, Zhang, C, et al., “Composite Coating Prepared by Micro-Arc Oxidation Followed by Sol–Gel Process and In Vitro Degradation Properties.” Appl. Surf. Sci., 258 (7) 2939–2943 (2012)

    CAS  Google Scholar 

  51. Niu, B, Shi, P, Shanshan, E, Wei, D, Li, Q, Chen, Y, “Preparation and Characterization of HA Sol–Gel Coating on MAO Coated AZ31 Alloy.” Surf. Coat. Technol., 286 42–48 (2016)

    CAS  Google Scholar 

  52. Kirkland, NT, Lespagnol, J, Birbilis, N, Straiger, MP, “A Survey of Bio-Corrosion Rates of Magnesium Alloys.” Corros. Sci., 52 287–291 (2010)

    CAS  Google Scholar 

  53. Zeng, R, Dietzel, W, Witte, F, Hort, N, “Progress and Challenge for Magnesium Alloys as Biomaterials.” Adv. Biomater, 10 B3–B14 (2008)

    CAS  Google Scholar 

  54. Shadanbaz, Sh, Dias, GJ, “Calcium Phosphate Coatings on Magnesium Alloys for Biomedical Applications: A Review.” Acta Biomater, 8 20–30 (2012)

    CAS  Google Scholar 

  55. Liu, GY, Hu, J, Ding, ZK, Wang, C, “Bioactive Calcium Phosphate Coating Formed on Micro-Arc Oxidized Magnesium by Chemical Deposition.” Appl. Surf. Sci., 257 2051–2057 (2011)

    CAS  Google Scholar 

  56. Gao, JH, Guan, SK, Chen, J, Wang, LG, “Fabrication and Characterization of Rod-Like Nano-Hydroxyapatite on MAO Coating Supported on Mg-Zn-Ca Alloy.” Appl. Surf. Sci., 257 2231–2237 (2011)

    CAS  Google Scholar 

  57. Baskiewicz, J, Krupa, D, Mizera, J, Sobczak, JW, “Corrosion Resistance of the Surface Layers Formed on Titanium by Plasma Electrolytic Oxidation and Hydrothermal Treatment.” Vacuum, 78 (2–4) 143–147 (2005)

    Google Scholar 

  58. Liu, F, Song, Y, Wang, F, Shimizu, T, et al., “Formation Characterization of Hydroxyapatite on Titanium by Microarc Oxidation and Hydrothermal Treatment.” J. Biosci. BioEng., 100 (1) 100–104 (2005)

    CAS  Google Scholar 

  59. Yu, W, Sun, R, Guo, Z, Wang, Z, et al., “Novel Fluoridated Hydroxyapatite/MAO Composite Coating on AZ31B Magnesium Alloy for Biomedical Application.” Appl. Surf. Sci., 464 708–715 (2019)

    CAS  Google Scholar 

  60. Guo, JW, Sun, SY, Wang, YM, Zhou, Y, Wei, DQ, Jia, DC, “Hydrothermal Biomimetic Modification of Microarc Oxidized Magnesium Alloy for Enhanced Corrosion Resistance and Deposition Behaviors in SBF.” Surf. Coat. Technol., 269 183–190 (2015)

    CAS  Google Scholar 

  61. Yao, Z, Xia, Q, Chang, L, Li, C, Jiang, Z, “Structure and Properties of Compound Coatings on Mg Alloys by Micro-Arc Oxidation/Hydrothermal Treatment.” J. Alloys Comput., 633 435–442 (2015)

    CAS  Google Scholar 

  62. Zhao, D, Sun, J, Zhang, L, Tan, Y, et al., “Corrosion Behavior of Rare Earth Cerium Based Conversion Coating on Aluminum Alloy.” J. Rare Earths, 28 371–374 (2010)

    Google Scholar 

  63. Conde, A, Arenas, MA, de Frutos, A, de Damborenea, J, “Effective Corrosion Protection of 8090 Alloy by Cerium Conversion Coatings.” Electrochim. Acta, 53 7760–7768 (2008)

    CAS  Google Scholar 

  64. Li, L, Lei, J, Yu, S, Tian, Y, “Formation and Characterization of Cerium Conversion Coatings on Magnesium Alloy.” J. Rare Earths, 26 (3) 383–387 (2008)

    Google Scholar 

  65. Rudd, AL, Breslin, CB, Mansfeld, F, “The Corrosion Protection Afforded by Rare Earth Conversion Coatings Applied to Magnesium.” Corros. Sci., 42 275–288 (2000)

    CAS  Google Scholar 

  66. Ardelean, H, Frateur, I, Marcus, P, “Corrosion Protection of Magnesium Alloys by Cerium, Zirconium and Niobium-Based Conversion Coatings.” Corros. Sci., 50 1907–1918 (2008)

    CAS  Google Scholar 

  67. Lim, TS, Ryu, HS, Hong, S-H, “Plasma Electrolytic Oxidation/Cerium Conversion Composite Coatings for the Improved Corrosion Protection of AZ31 Mg Alloys.” J. Electrochem. Soc., 160 (2) 77–82 (2013)

    Google Scholar 

  68. Phuong, NV, Fazal, BR, Moon, S, “Cerium and Phosphate Based Sealing Treatments of PEO Coated AZ31 Mg Alloy.” Surf. Coat. Technol., 309 86–95 (2017)

    CAS  Google Scholar 

  69. Jiang, X, Guo, R, Jiang, S, “Evaluation of Self-Healing Ability of Ce–V Conversion Coating on AZ31 Magnesium Alloy.” J. Magnesium Alloys, 4 (3) 230–241 (2016)

    Google Scholar 

  70. Mohedano, M, Blawert, C, Zheludkevich, ML, “Cerium-Based Sealing of PEO Coated AM50 Magnesium Alloy.” Surf. Coat. Technol., 269 145–154 (2015)

    CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Dongjin Choi.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Lkhagvaa, T., Rehman, Z.U. & Choi, D. Post-anodization methods for improved anticorrosion properties: a review. J Coat Technol Res 18, 1–17 (2021). https://doi.org/10.1007/s11998-020-00367-8

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11998-020-00367-8

Keywords

Navigation