Abstract
This work analyzes the electrical heating by Joule’s effect of epoxy resins doped with carbon nanotubes (CNTs), graphene nanoplatelets (GNPs) or a combination of both. The main objective is to obtain heat-dissipating materials with relatively high electrical conductivity for future applications in smart electrical and electronic devices. In addition, a thermal and mechanical characterization of the composites is carried out in order to study the combined effect of CNT and GNP. Different nanocomposites were manufactured by a three-roll mill process, as the dispersion technique. A thermal infrared camera was used to acquire the temperature’s increment due to Joule’s heating. CNT addition induces an important increase in electrical conductivity, which has associated an important heating. The combined addition of both nanofillers, GNP and CNT, scarcely modifies the electrical conductivity, but it induces an important increase in thermal conductivity of the composites. This helps lead to a more homogeneous heating and therefore a more efficient heat dissipation.
Similar content being viewed by others
References
Paszkiewicz, S, Szymczyk, A, Sui, XM, Wagner, HD, Linares, A, Ezquerra, TA, Rosłaniec, Z, “Synergetic Effect of Single-Walled Carbon Nanotubes (SWCNT) and Graphene Nanoplatelets (GNP) in Electrically Conductive PTT-Block-PTMO Hybrid Nanocomposites Prepared by In Situ Polymerization.” Compos. Sci. Technol., 118 72–77 (2015)
Poutrel, QA, Wang, Z, Wang, D, Soutis, C, Gresil, M, “Effect of Pre and Post-dispersion on Electro-Thermo-Mechanical Properties of a Graphene Enhanced Epoxy.” Appl. Compos. Mater., 24 313–336 (2017)
Moisala, A, Li, Q, Kinloch, IA, Windle, AH, “Thermal and Electrical Conductivity of Single- and Multi-walled Carbon Nanotube-Epoxy Composites.” Compos. Sci. Technol., 66 1285–1288 (2006)
Tsekmes, IA, Kochetov, R, Morshuis, PHF, Smit, JJ, “Thermal Conductivity of Polymeric Composites: A Review.” In: IEEE International Conference on Solid Dielectrics, Bologna, Italy (2013)
Li, Q, Gui, Y, Mu, Q, Ran, Q, Liu, H, “Effect of Composite Surface Treatment on Heat Dissipation of LEDs.” Mater. Des., 89 (5) 597–603 (2016)
Kim, D, Lee, J, Kim, J, Choi, CH, Chung, W, “Enhancement of Heat Dissipation of LED Module with Cupric-Oxide Composite Coating on Aluminum-Alloy Heat Sink.” Energy Convers. Manag., 106 958–963 (2015)
Zhao, B, Wang, S, Zhao, C, Li, R, Hamidinejad, SM, Kazemi, Y, Park, CB, “Synergism Between Carbon Materials and Ni Chains in Flexible Poly(Vinylidene Fluoride) Composite Films with High Heat Dissipation to Improve Electromagnetic Shielding Properties.” Carbon, 127 469–478 (2018)
Park, JS, An, YJ, Shin, K, Han, JH, Lee, CS, “Enhanced Thermal Conductivity of Epoxy/Three-Dimensional Carbon Hybrid Filler Composites for Effective Heat Dissipation.” RSC Adv., 5 46989–46996 (2015)
Rybiński, P, Anyszka, R, Imiela, M, Siciński, M, Gozdek, T, “Effect of Modified Graphene and Carbon Nanotubes on the Thermal Properties and Flammability of Elastomeric Materials.” J. Therm. Anal. Calorim., 127 2383–2396 (2017)
Moriche, R, Prolongo, SG, Sánchez, M, Jiménez-Suárez, A, Chamizo, FJ, Ureña, A, “Thermal Conductivity and Lap Shear Strength of GNP/Epoxy Nanocomposites Adhesives.” Int. J. Adhes., 68 407–410 (2016)
Cecen, V, Thomann, R, Mülhaupt, R, Friedrich, C, “Thermal Conductivity, Morphology and Mechanical Properties for Thermally Reduced Graphite Oxide-Filled Ethylene Vinylacetate Copolymers.” Polymer, 132 294–305 (2017)
Nomura, T, Tabuchi, K, Zhu, C, Sheng, N, Wang, S, Akiyama, T, “High Thermal Conductivity Phase Change Composite with Percolating Carbon Fiber Network.” Appl. Energy, 154 678–685 (2015)
Bauhofer, W, Kovacs, JZ, “A Review and Analysis of Electrical Percolation in Carbon Nanotube Polymer Composites.” Compos. Sci. Technol., 69 1486–1498 (2009)
Burger, N, Laachachi, A, Ferriol, M, Lutz, M, Toniazzo, V, Rucha, D, “Review of Thermal Conductivity in Composites: Mechanisms, Parameters and Theory.” Prog. Polym. Sci., 61 1–28 (2016)
Moriche, R, Prolongo, SG, Sánchez, M, Jiménez-Suárez, A, Sayagués, MJ, Ureña, A, “Morphological Changes on Graphene Nanoplatelets Induced During Dispersion into an Epoxy Resin by Different Methods.” Compos. Part B Eng., 72 199–205 (2015)
Prolongo, SG, Moriche, R, Sánchez, M, Ureña, A, “Self-Stratifying and Orientation of Exfoliated Few-Layer Graphene Nanoplatelets in Epoxy Composites.” Compos. Sci. Technol., 85 136–141 (2013)
Hu, H, Wang, X, Wang, J, Wan, L, Liu, F, Zheng, H, Chen, R, Xu, C, “Preparation and Properties of Graphene Nanosheets–Polystyrene Nanocomposites Via In Situ Emulsion Polymerization.” Chem. Phys. Lett., 484 247–253 (2010)
Quan, H, Zhang, B-Q, Zhao, Q, Yuen, RKK, Li, RKY, “Facile Preparation and Thermal Degradation Studies of Graphite Nanoplatelets (GNPs) Filled Thermoplastic Polyurethane (TPU) Nanocomposites.” Compos. Part A Appl. Sci. Manuf., 40 1506–1513 (2009)
Miyagawa, H, Drzal, LT, “Thermo-Physical and Impact Properties of Epoxy Nanocomposites Reinforced by Single-Wall Carbon Nanotubes.” Polymer, 45 5163–5170 (2004)
Moisala, A, Li, Q, Kinloch, IA, Windle, AH, “Thermal and Electrical Conductivity of Single- and Multi-walled Carbon Nanotube-Epoxy Composites.” Compos. Sci. Technol., 66 1285–1288 (2006)
Acknowledgments
The authors would like to thank the Ministerio de Economía y Competitividad of Spain Government, through the research project MAT2016-78825-C2-1-R and the Ph.D. Grant of O. Redondo MAT2013-46695-C3-1-R.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Prolongo, S.G., Redondo, O., Campo, M. et al. Heat dissipation on electrical conductor composites by combination of carbon nanotubes and graphene nanoplatelets. J Coat Technol Res 16, 491–498 (2019). https://doi.org/10.1007/s11998-018-0127-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-018-0127-7