Abstract
Silicon is widely used for its semiconducting properties in electronic and photovoltaic devices. These applications require strict control of the structure and impurity levels. Silicon must, therefore, be solidified using processes that give a minimum of impurity contamination and microstructural defects, as well as a planar solidification front to avoid microsegregation. Czochralski growth, and to some extent float zone crystallization, are processes used to obtain defect-free single crystals for integrated circuits and advanced solar cell wafers, whereas the Bridgman process can be used for production of multicrystalline silicon for standard solar cells. Direct solar cell wafer solidification processes have also been developed and reached limited commercial use. The paper will review these silicon crystallization processes and discuss recent developments and trends.
Similar content being viewed by others
References
A.A. Istratov, T. Buonassisi, M.D. Pickett, and E.R. Weber, Mater. Sci. Eng., B, 134(1–2) (2006), pp. 282–286.
G. Stokkan, S. Riepe, O. Lohne, and W.J. Warta, J. Appl. Phys., 101 (2007), p. 53515.
Y. Jiao, A. Salce, W. Ben, F. Jiang, X. Ji, E. Morey, and D. Lynch, JOM, 63(1) (2011), pp. 28–31.
E. Monberg, in Handbook of Crystal Growth, vol. 2, ed. D.T.J. Hurle (New York: Elsevier Science, 1994), pp. 52–97.
R. Kvande, L. Arnberg, and C. Martin, J. Cryst. Growth, 311 (2009), pp. 765–768.
C. Modanese, M. Di Sabatino, M. Syvertsen, H. Søheim, and L. Arnberg, J. Cryst. Growth (submitted in 2011).
K. Fujiwara, J. Pan, N. Usami, K. Sawada, M. Tokairin, A. Nomura, T. Shishiro, and K. Nakajima, Acta Mater., 54 (2006), p. 3191.
N. Stoddard, B. Wu, I. Witting, M. Wagener, Y. Park, G. Rozgonyi, and R. Clark, Solid State Phenom., 1 (2008), pp. 131–133.
Y. Nose, I. Takahashi, W. Pan, N. Usami, K. Fujiwara, and K. Nakajima, J. Cryst. Growth, 311 (2009), pp. 228–231.
K. Kaneko, K. Nakagawa, T. Onizuka, K. Sasatani, N. Kubo, and M. Kida, Recent Status on Electromagnetic Casting 16th Workshop on Crystalline Silicon Solar Cells and Modules, ed. B.L. Sopori (Golden, CO: NREL, 2006), pp. 2–7.
T.F. Ciszek, J. Cryst. Growth, 66 (1984), p. 655.
F.W. Wald, in Crystals: Growth, Properties, and Applications 5 (Berlin: Springer, 1981), p. 147.
J.P. Kalejs, Solar Energy Materials & Solar Cells, 72 (2002), pp. 139–153.
G. Hahn, S. Seren, M. Kaes, A. Schönecker, J.P. Kalejs, C. Dubé, A. Grenko, and C. Belouet, “Review on Ribbon Silicon Techniques for Cost Reduction in PV,” Proceedings of 4th WC PEC Waikoloa (Piscataway, NJ: IEEE, 2006), pp. 972–975.
J Czochralski, Z. Phys. Chem., 92 (1918), p. 219.
G.K. Teal and J.B. Little, Phys. Rev., 78 (1959), p. 219.
G.K. Teal and E. Bühler, Phys. Rev., 87 (1952), p. 190.
W.C. Dash, J. Appl. Phys., 30 (1959), p. 459.
O. Anttila, Handbook of Silicon Based MEMS Materials and Technologies, ed. Veikko Lindroos, Markku Tilli, Ari Lehto, Teruaki Motooka (New York: Elsevier e-book, 2010).
H. Ming Liaw, Handbook of Semiconductor Silicon Technology, ed. W.C. O’Mara (Park Ridge, NJ: Noyes Publications, 1990), pp. 94–171.
W. Zulehner, J. Cryst. Growth, 65 (1983), pp. 189–213.
V.V. Voronkov and R. Falster, J. Cryst. Growth, 194 (1998), pp. 76–88.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Arnberg, L., Di Sabatino, M. & Øvrelid, E. Solidification of silicon for electronic and solar applications. JOM 63, 38–42 (2011). https://doi.org/10.1007/s11837-011-0173-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-011-0173-4