Abstract
In 2001, the aluminum industry continues to benefit from technical innovations made in alloy development, product-manufacturing technologies, and processing equipment over the last century. This paper examines the top ten alloy, product, and process developments that have shaped the industry’s production methods and markets. The interrelationships among the alloy development, process innovations, and markets are highlighted. Omitted are details about patent literature or the inception of many technologies; the major criterion for placement on the list was impact on the total industry.
Similar content being viewed by others
References
Aluminum Statistical Review for 1999 (Washington, D.C.: The Aluminum Association, Inc., 2000).
C.C. Carr, Alcoa, An American Enterprise (New York: Rinehart and Company, Inc., 1952).
W.T. Ennor, U.S. patent 2,301,027 (1942).
J.D. Edwards, F.C. Frary, and Z. Jeffries, The Aluminum Industry, Vol. 2 (New York: McGraw-Hill, 1930).
Harold Y. Hunsicker, Alcoa Technical Center (retired), personal communication.
Z. Jeffries, “Two Decades of Precipitation Hardening Alloys,” Metals and Alloys, 1 (1) (1929), pp. 3–5.
H.Y. Hunsicker and H.C. Stumpf, History of Precipitation Hardening, Sorby Centennial Symposium on the History of Metallurgy (New York: Gordon and Breach Science Publishers, 1965).
J.D. Edwards, F.C. Frary, and Z. Jeffries, in Ref. 4, p. 234.
Harold Y. Hunsicker, Alcoa Technical Center (retired), personal communication.
J.T. Staley, J. Liu, and W.H. Hunt, Jr., Advanced Materials and Processes, 152, (4) (October 1997), pp. 17–20.
W.F. Hosford and J.L. Duncan, “The Aluminum Beverage Can,” Scientific American (September 1994), pp. 48–53.
W.A. Anderson and J.K. McBride, “Alloy 5182,” U.S. patent 3,502,448 (1970).
E.D. Fraze, U.S. patent 3,273,744 (1966).
Aluminum Statistical Review for 1999 (Washington, D.C.: The Aluminum Association, Inc., 2000), p. 14.
M.B.W. Graham and B.H. Pruitt, R&D for Industry (New York: Cambridge University Press, 1990), pp. 88–89.
C.C. Carr, Alcoa, An American Enterprise (New York: Rinehart and Company, 1952), p. 183.
K.J. Brondyke and P.D. Hess, “Filtering and Fluxing Processes for Aluminum Alloys,” Transactions AIME (New York: AIME, 1964), p. 1553.
J.D. Edwards, F.C. Frary, and Z. Jeffries, in Ref. 4, p. 245.
M. B. W. Graham and B. H. Pruitt, R&D for Industry (New York: Cambridge University Press, 1990), pp. 93–96.
J.D. Edwards, F.C. Frary, and Z. Jeffries, in Ref. 4, p. 13.
D.M. Lewis, Metall. Rev., 6 (22) (1961), pp. 143–192.
E.F. Emley, Int. Metall. Rev. (206) (June 1976), p. 102.
Papers presented at the Continuous Casting Seminar (Washington, D.C.: Aluminum Association, 1975).
Z. Jeffries, “Two Decades of Precipitation Hardening Alloys,” Metals and Alloys, 1 (1) (1929), p. 4.
H.Y. Hunsicker and R.C. Lemon U.S. patent 3,161,502 (1964).
Designations and Chemical Composition Limits for Aluminum Alloys in the Form of Castings and Ingot (Washington, D.C.: Aluminum Association, 1999 February).
J.C. Benedyk, “Automotive Aluminum Casting Trends and Developments,” Light Metal Age, 58 (9–10) (October 2000), pp. 36–41.
R. Couchman, Alcoa (retired), unpublished work.
R.F. Ashton, “The Metallurgy of Press Heat Treatable Al-Zn-Mg Extrusion Alloys” (Paper No. 12, presented at the Int. Extrusion Technol. Seminar, New Orleans, March 3–5, 1969.
Author information
Authors and Affiliations
Additional information
Editor’s Note: A hypertext-enhanced version of this article can be found at www.tms.org/pubs/journals/JOM/0002/Sanders-0002.html.
For more information, contact R.E. Sanders, Jr., Alcoa Inc., 100 Technical Drive, Alcoa Center, Pennsylvania 15069; (724) 337-2478; fax (724) 337-2044; e-mail robert.sanders@alcoa.com.
Rights and permissions
About this article
Cite this article
Sanders, R.E. Technology innovation in aluminum products. JOM 53, 21–25 (2001). https://doi.org/10.1007/s11837-001-0115-7
Issue Date:
DOI: https://doi.org/10.1007/s11837-001-0115-7