Abstract
The effects of pyrolysis mode and pyrolysis parameters on Cl content in alumina were investigated, and the alumina products were characterized by XRD, SEM and ASAP. The experimental results indicate that the spray pyrolysis efficiency is higher than that of static pyrolysis process, and the reaction and evaporation process lead to a multi-plot state of the alumina products by spray pyrolysis. Aluminum phase starts to transform into γ-Al2O3 at spray pyrolysis temperature of 600 °C, which is about 200 °C lower than that of static pyrolysis process. The primary particle size of γ-Al2O3 product is 27.62 nm, and Cl content in alumina products is 0.38% at 800 °C for 20 min.
Similar content being viewed by others
References
WU Cheng-you, YU Hong-fa, ZHANG Hui-fang. Extraction of aluminum by pressure acid-leaching method from coal fly ash [J]. Transaction of Nonferrous Metals Society of China, 2012, 22(9): 2281–2288.
AHMARUZZAMAN M. A review on the utilization of fly ash [J]. Progress in Energy and Combustion Science, 2010, 36(3): 327–363.
WANG Fu-yuan, WU Yuan-zheng. Fly ash utilization handbook [M]. Beijing: Electric Power Press, 2004: 4–23. (in Chinese)
CHEN Wan-kun, PENG Guan-cai. Intensified digestion technology of bauxite [M]. Beijing: Metallurgical Industry Press, 1998: 23-95. (in Chinese)
YANG Zhong-yu. Alumina production technology [M]. Beijing: Metallurgical Industry Press, 1998: 112–156. (in Chinese)
LI Xin-hua, GU Song-qing, YIN Zhong-lin, WU Guo-bao, ZHAI Yu-chun. Regulating the digestion of high silica bauxite with calcium ferrite addition [J]. Hydrometallurgy, 2010, 104(2): 313–316.
WANG Yi-yong, ZHANG Ting-an, CHEN Xia, BAO Li. Effects of microwave roasting on leaching behavior of diaspore ore [J]. The Chinese Journal of Process Engineering, 2007, 7(2): 317–321. (in Chinese)
KAKROUDI M G, FOGAING E Y, GAULT C, HUGER M, CHOTARD T. Effect of thermal treatment on damage mechanical behaviour of refractory castables: Comparison between bauxite and andalusite aggregates [J]. Journal of the European Ceramic Society, 2008, 28(13): 2471–2478.
ALEX T C, KUMAR R, ROY S K, MEHROTRA S P. Stirred bead mill grinding of gibbsite: surface and morphological changes [J]. Advanced Powder Technology, 2008, 19(5): 483–491.
GRZYMEK J, DERDAKA W A. Method for obtaining aluminum oxide, US 4149898 [P]. 1979-02-21.
QIN Jian-guo. A technique of preparing silicon oxide and alumina with fly ash, CN 200710061662.X [P]. 2007-04-03. (in Chinese)
SEIDEL A, ZEMMLES Y. Mechanism and kinetics of aluminum and iron leaching from coal fly ash by sulfuric acid [J]. Chemical Engineering Science, 1998, 53(22): 3835–3852.
SEIDEL A, SLUSZNY A, SHELEF G, ZIMMELS Y. Self inhibition of aluminum leaching from coal fly ash by sulfuric acid [J]. Chemical Engineering Science, 1999, 72(3): 195–207.
KELMERS A D, CANON R M, EGAN B Z, FLEKER L K. Chemistry of the direct acid leach, calsinter, and pressure digestion-acid leach methods for recovery of aluminum from fly-ash [J]. Resources and Conservation, 1982, 9(1/2/3/4): 271–279.
SHAMALA K S, MURTHY L C S, RAO K N. Studies on optical and electrical properties of Al2O3 thin films prepared by spray pyrolysis and electron beam evaporation [J]. Materials Science and Engineering B, 2004, 106(3): 269–274.
AUGILAR-FRUIT M, GARCIA M, FALCONY C. Optical and electrical properties of aluminum oxide thin films prepared by spray pyrolysis [J]. Applied Physics Letters, 1998, 72(2/3): 1700–1706.
NASUTION I, VELASCO A, KIM H J. Atmospheric pressure chemical vapor deposition mechanism of Al2O3 film from AlCl3 and O2 [J]. Journal of Crystal Growth, 2009, 311(2): 429–434.
OKADA K, NAGASHIMA T, KAMESHIMA Y, YASUMORI A. Effect of crystallize size of boehmite on sinterability of alumina ceramics [J]. Ceramics International, 2003, 29(5): 533–537.
PARK T, LIM J S, LEE Y, KIM S. Catalytic supercritical water oxidation of waste water from terephthalic acid manufacturing process [J]. The Journal of Supercritical Fluids, 2003, 26(3): 201–213.
HELLGARDT K, CHADWICK D. Effect of pH of precipitation on the preparation of high surface area alumina from nitrate solutions [J]. Industrial and Engineering Chemistry Research, 1998, 37(2): 405–411.
NOGUCHI T, MATSUI K, ISLAM N M, HAKUTA Y, HAYASHI H. Rapid synthesis of γ-Al2O3 nanoparticles in supercritical water by continuous hydrothermal flow reaction system [J]. The Journal of Supercritical Fluids, 2008, 46(2): 129–136.
ZHANG Qing-hong, GAO Lian, GUO Jing-kun. Effects of sulfate ions and hydrolytic temperature on the properties of TiC14-derived nanostructured TiO2 [J]. Journal of Inorganic Materials, 2000, 15(6): 992–997. (in Chinese)
QI Hong. Preparation of composite microporous silica membranes using TEOS and 1, 2-bis(triethoxysilyl) ethane as precursors for gas separation [J]. Chinese Journal of Chemical Engineering, 2011, 19(3): 404–409.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Projects(U1202274, 51004033, 51204040) supported by the National Natural Science Foundation of China; Project(2012AA062303) supported by the National High Technology Research and Development Program of China; Project(2012BAE01B02) supported by the National Science and Technology Support Program of China; Project(L2014096) supported by the Education Department of Liaoning Province, China; Project(N130702001) supported by the Fundamental Research Funds for the Central Universities, China
Rights and permissions
About this article
Cite this article
Lü, Gz., Zhang, Ta., Wang, L. et al. Direct spray pyrolysis of aluminum chloride solution for alumina preparation. J. Cent. South Univ. 21, 4450–4455 (2014). https://doi.org/10.1007/s11771-014-2448-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-014-2448-8