Abstract
Heat pipe is always bent in the typical application of electronic heat dissipation at high heat flux, which greatly affects its heat transfer performance. The capillary limit of heat transport in the bent micro-grooved heat pipes was analyzed in the vapor pressure drop, the liquid pressure drop and the interaction of the vapor with wick fluid. The bent heat pipes were fabricated and tested from the bending angle, the bending position and the bending radius. The results show that temperature difference and thermal resistance increase while the heat transfer capacity of the heat pipe decreases, with the increase of the bending angles and the bending position closer to the vapor section. However, the effects of bending radius can be ignored. The result agrees well with the predicted equations.
Similar content being viewed by others
References
PETERSON G P, MA H B. Temperature response of heat transport in a micro heat pipe [J]. Journal of Heat Transfer, 1999, 121: 438–445.
MCGLEN R J, JACHUCK R, LIN S. Integrated thermal management techniques for high power electronic devices [J]. Applied Thermal Engineering, 2004, 24(8/9): 1143–1156.
BLISS F E, CLARK E G, STEIN B. Construction and test of a flexible heat pipe [C]// ASME Conference Paper, New York: 1970: 123–129.
MERRIGAN M A, KEDDY E S, SENA J T, ELDER M G. Heat pipe technology development for high temperature space radiator applications [C]// Proceedings of the 19th Intersociety Energy Conversion Conference. San Francisco, 1984: 592–597.
SHAUBACH R M, GERNERT N J. High performance flexible heat pipe [C]// AIAA 20th Thermo Physics Conference. New York, 1985: 121–128.
DHANANJAY D O, DANIEL K H. Experimental investigation of bendable heat pipes using sintered copper felt wick [C]// Thermomechanical Phenomena in Electronic Systems-Proceedings of the Intersociety Conference. San Diego, 2006: 570–577.
TAO Han-zhong, ZHANG hong, ZHUANG Jun. Comparison of the heat transfer performance in an AGHP with and without 90° bend [J]. Journal of Astronautics, 2008, 29(2): 722–728. (in Chinese)
WANG J. Experimental investigation of the transient thermal performance of a bent heat pipe with grooved surface [J]. Applied Energy, 2009, 86: 2030–2037.
LUIKOV A V, VASILIEV L L. Progress in heat pipe and porous heat exchanger technology [J]. International Journal of Heat Mass Transfer, 1975, 18(2): 177–190.
PADMANABHAN N. Entry flow in heated curved pipes [J]. International Journal of Heat Mass Transfer, 1987, 30(7): 1453–1463.
HOPKINS R, FAGHRI A, Flat miniature heat pipes with micro capillary grooves [J]. Journal of Heat Transfer, 1999, 121: 102–109.
CHI S W. Heat pipe theory and practice [M]. Washington D C: Hemisphere Publishing Corporation, 1976: 100–105.
TANG Y, CHI Y, CHEN J C, DENG X X, LIU L, LIU X K, WAN Z P. Experimental study of oil-filled high-speed spin forming micro-groove fin-inside tubes [J]. Machine Tools and Manufacture, 2007, 47: 1059–1068.
LI Yong, XIAO Hui, LIAN Bian, TANG Yong. Forming method of axial micro grooves inside copper heat pipe [J]. Transaction of Nonferrous Metals Society of China, 2008, 18: 1229–1233.
BAI Peng-fei, TANG Yong, TANG Biao, LU Long-sheng. Thermal performance of heat pipe with different micro-groove structures [J]. Journal of Central South University of Technology, 2008, 15(S2): 240–244.
CHEN Yong-ping, ZHANG Cheng-bin, SHI Ming-heng, WU Jia-feng, PETERSON G P. Study on flow and heat transfer characteristics of heat pipe with axial “Ω”-shaped microgrooves [J]. International Journal of Heat and Mass Transfer, 2009, 52: 636–643.
PETERSON G P, MA H B. Temperature response of heat transport in a micro heat pipe [J]. Transactions of the ASME, 1999, 121: 438–445.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Project(U0834002) supported by the Joint Funds of the National Nature Science Foundation of China and Guangdong Province; Project (2009ZM0134) supported by the Foundational Research Funds for the Central Universities in China
Rights and permissions
About this article
Cite this article
Jiang, Ll., Tang, Y. & Pan, Mq. Effects of bending on heat transfer performance of axial micro-grooved heat pipe. J. Cent. South Univ. Technol. 18, 580–586 (2011). https://doi.org/10.1007/s11771-011-0734-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-011-0734-2