Skip to main content
Log in

Elastoplastic analysis for infinite plate with centric crack loaded by two pairs of point shear forces

  • Geology, Mining And Civil Engineering
  • Published:
Journal of Central South University of Technology Aims and scope Submit manuscript

Abstract

The near crack line analysis method was used to investigate a crack loaded by two pairs of point shear forces in an infinite plate in an elastic-perfectly plastic solid, and the analytical solution was obtained. The solutions include: the unit normal vector of the elastic-plastic boundary near the crack line, the elastic-plastic stress fields near crack line, law that the length of the plastic zone along the crack line is varied with an external loads, and the bearing capacity of an infinite plate with a center crack loaded by two pairs of point shear forces. The results are sufficiently precise near the crack line because the assumptions of the small scale yielding theory have not been made and no other assumption have been taken.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Achenbach J D, Li Z L. Plane stress crack line fields for crack growth in in an elastic-perfectly plastic material [J]. Engineering Fracture Mechanics, 1980, 20(3): 534–544.

    Google Scholar 

  2. Achenbach J D, Dunayevsky V. Crack growth under plane stress condition in an elastic-perfectly plastic material [J]. Journal of Mechanics and Physics of Solids, 1984, 32: 89–100.

    Article  Google Scholar 

  3. Guo Q, Li K. The dimension of plastic zone ahead of a mode III plane stress crack [J]. Engineering Fracture Mechanics, 1988, 29(1): 107–112.

    Article  Google Scholar 

  4. Yi Z. The new and analytical solutions for mode III cracks in an elastic-perfectly material [J]. Engineering Fracture Mechanics, 1992, 42(6): 833–840.

    Article  Google Scholar 

  5. Yi Z. Precise solutions of elastic-plastic crack line fields for crack loaded by antiplane point forces [J]. Engineering Fracture Mechanics, 1997, 57(1): 75–83.

    Article  MathSciNet  Google Scholar 

  6. WANG Jian-hua, ZHOU Xiao-ping. Near crack line elastic-plastic analysis for a infinite plate loaded by two pairs of point tensile forces [J]. Mechanics Research Communications, 2004, 31: 415–420.

    Article  Google Scholar 

  7. ZHOU Xiao-ping, WANG Jian-hua. Study on the coalescence mechanism of splitting failure of crack-weakened rock subjected to compressive loads [J]. Mechanics Research Communications, 2005, 32(2): 161–171.

    Article  Google Scholar 

  8. ZHOU Xiao-ping, ZHANG Yong-xing, ZHU Keshan. Elastic-plastic analytical solution for an eccentric crack loaded by a pair of tensile point forces [J]. Acta Mechanica Solida Sinca, 2005, 26(3): 325–332.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Zhou Xiao-ping PhD.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Zhou, Xp., Ling, Th. Elastoplastic analysis for infinite plate with centric crack loaded by two pairs of point shear forces. J Cent. South Univ. Technol. 12 (Suppl 1), 189–193 (2005). https://doi.org/10.1007/s11771-005-0397-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11771-005-0397-y

Key words

CLC number

Navigation