Abstract
Reinforced concrete (RC) slabs are characterized by reduced construction time, versatility, and easier space partitioning. Their structural behavior is not straightforward and, specifically, punching shear strength is a current research topic. In this study an experimental database of 113 RC slabs without shear reinforcement under punching loads was compiled using data available in the literature. A sensitivity analysis of the parameters involved in the punching shear strength assessment was conducted, which highlighted the importance of the flexural reinforcement that are not typically considered for punching shear strength. After a discussion of the current international standards, a new proposed model for punching shear strength and rotation of RC slabs without shear reinforcement was discussed. It was based on a simplified load-rotation curve and new failure criteria that takes into account the flexural reinforcement effects. This experimental database was used to validate the approaches of the current international standards as well as the new proposed model. The latter proved to be a potentially useful design tool.
Similar content being viewed by others
References
Vakhshouri B, Nejadi S. Instantaneous deflection of light-weight concrete slabs. Frontiers of Structural and Civil Engineering, 2017, 11(4): 412–123
Wu J, Liu X. Performance of soft-hard-soft (SHS) cement based composite subjected to blast loading with consideration of interface properties. Frontiers of Structural and Civil Engineering, 2015, 9(3): 323–340
Baroth J, Daudeville L, Malécot Y. About empirical models predicting the missile perforation of concrete barriers. European Journal of Environmental and Civil Engineering, 2012, 16(9): 1074–1089
Micallef K, Sagaseta J, Fernández Ruiz M, Muttoni A. Assessing punching shear failure in reinforced concrete flat slabs subjected to localised impact loading. International Journal of Impact Engineering, 2014, 71: 17–33
Sagaseta J, Ulaeto N, Russel J. Structural robustness of concrete flat slab structures. In: Proceedings of ACI-fib International Symposium on Punching Shear of Structural Concrete Slabs 2016. Philadelphia, 2016
Fib Bulletin N. Punching Shear of Structural Concrete Slabs. Technical Report, 2017
EN-1992-1-1, Eurocode 2. Design of Concrete Structures. Part 1–1: General Rules and Rules for Buildings. 2008
ACI 318. Code Requirements for Reinforced Concrete. 2011
Fib Bulletin N. Model Code 2010. 2010
Hallgren M. Punching shear capacity of reinforced high strength concrete slabs. Dissertation for the Doctoral Degree. Stockholm: Royal Institute of Technology, 1996
Guandalini S. Symmetric punching in R/C slabs. Dissertation for the Doctoral Degree. Lausanne: École Polytechnique Fédérale de Lausanne, EPFL, 2005 (in French)
Li K K L. Influence of size on punching shear strength. Dissertation for the Doctoral Degree. Montreal McGill University, 2000
Elstner R C, Hognestad E. Shearing strength of reinforced concrete slabs. ACI Journal Proceedings, 1956, 53(2): 29–58
Francesconi L, Pani L, Stochino F. Punching shear strength of reinforced recycled concrete slabs. Construction & Building Materials, 2016, 127: 248–263
Rao H S, Reddy V S K, Ghorpade V G. Influence of recycled coarse aggregate on punching behaviour of recycled coarse aggregate concrete slabs. International Journal of Modern Engineering Research (IJMER), 2015, 2(4): 2815–2820
Ruiz M F, Mirzaei Y, Muttoni A. Post-punching behavior of flat slabs. ACI Structural Journal, 2013, 110(5): 801–811
Lips S. Punching of flat slabs with large amounts of shear reinforcement. Dissertation for the Doctoral Degree. Lausanne: École Polytechnique Fédérale de Lausanne, EPFL, 2012
Reis N, de Brito J, Correia J R, Arruda M R T. Punching behaviour of concrete slabs incorporating coarse recycled concrete aggregates. Engineering Structures, 2015, 100: 238–248
Inácio M M G, Almeida A F O, Faria D M V, Lucio V J G, Pinho-Ramos A. Punching of high strength concrete flat slabs without shear reinforcement. Engineering Structures, 2015, 103: 275–284
Ramdane K E. Punching shear of high performance concrete slabs. In: The 4th International Symposium on Utilization of High-strength/High Performance Concrete. Paris, 1996
Muttoni A. Punching shear strength of reinforced concrete slabs without transverse reinforcement. ACI Structural Journal, 2008, 105(4): 440–450
Kinnunen S, Nylander H. Punching of Concrete Slabs without Shear Reinforcement, Transactions of the Royal Institute of Technology. Stockholm, Sweden, 1960
Marí A, Cladera A, Oller E, Bairàn J M. A punching shear mechanical model for reinforced concrete flat slabs with and without shear reinforcement. Engineering Structures, 2018, 166: 413–426
Bui T T, Limam A, Nana W S A, Ferrier E, Bost M, Bui Q B. Evaluation of one-way shear behaviour of reinforced concrete slabs: Experimental and numerical analysis. European Journal of Environmental and Civil Engineering, 2017, 24(2): 190–216
Sigrist V, Bentz E, Ruiz M F, Foster S, Muttoni A. Background to the fib Model Code 2010 shear provisions—part I: Beams and slabs. Structural Concrete, 2013, 14(3): 195–203
Hedebratt J, Silfwerbrand J. Full-scale test of a pile supported steel fibre concrete slab. Materials and Structures, 2014, 47(4): 647–666
Hassan M, Ahmed E A, Benmokrane B. Punching-shear design equation for two-way concrete slabs reinforced with FRP bars and stirrups. Construction & Building Materials, 2014, 66: 522–532
Bastien-Masse M, Brühwiler E. Experimental investigation on punching resistance of R-UHPFRC-RC composite slabs. Materials and Structures, 2016, 49(5): 1573–1590
Stochino F, Pani L, Francesconi L, Mistretta F. Cracking of reinforced recycled concrete slabs. International Journal of Structural Glass and Advanced Materials Research, 2017, 1(1): 3–9
Etxeberria M, Marí A R, Vázquez E. Recycled aggregate concrete as structural material. Materials and Structures, 2007, 40(5): 529–541
Xiao J, Wang W, Zhou Z, Tawana M M. Punching shear behavior of recycled aggregate concrete slabs with and without steel fibres. Frontiers of Structural and Civil Engineering, 2019, 13(3): 725–740
Etxeberria M, Fernandez J M, Limeira J. Secondary aggregates and seawater employment for sustainable concrete dyke blocks production: Case study. Construction & Building Materials, 2016, 113: 586–595
Valivonis J, Skuturna T, Daugevičius M, Šneideris A. Punching shear strength of reinforced concrete slabs with plastic void formers. Construction & Building Materials, 2017, 145: 518–527
Youm K S, Kim J J, Moon J. Punching shear failure of slab with lightweight aggregate concrete (LWAC) and low reinforcement ratio. Construction & Building Materials, 2014, 65: 92–102
Fernández Ruiz M, Muttoni A, Sagaseta J. Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects. Engineering Structures, 2015, 99: 360–372
Walraven J C. Fundamental analysis of aggregate interlock. Journal of Structural Engineering, 1981, 107(11): 2245–2270
Vecchio F J, Collins M P. The modified compression-field theory for reinforced concrete elements subjected to shear. ACI Journal Proceedings, 1986, 83(2): 219–231
Bui T T, Abouri S, Limam A, NaNa W S A, Tedoldi B, Roure T. Experimental investigation of shear strength of full-scale concrete slabs subjected to concentrated loads in nuclear buildings. Engineering Structures, 2017, 131: 405–420
Nana W S A, Bui T T, Limam A, Abouri S. Experimental and numerical modelling of shear behaviour of full-scale RC slabs under concentrated loads. Structures, 2017, 10: 96–116
Nana W S A, Bui T T, Bost M, Limam A. Shear bearing capacity of rc slabs without shear reinforcement: Design codes comparison. KSCE Journal of Civil Engineering, 2019, 23: 321–334
Simães J T, Fernández Ruiz M, Muttoni A. Validation of the Critical shear crack theory for punching of slabs without transverse reinforcement by means of a refined mechanical model. Structural Concrete, 2018, 19(1): 191–216
Kirkpatrick S, Gelatt C D, Vecchi M P. Optimization by simulated annealing. Science, 1983, 220(4598): 671–680
Stochino F, Qinami A, Kaliske M. Eigenerosion for static and dynamic brittle fracture. Engineering Fracture Mechanics, 2017, 182: 537–551
Buffa F, Causin A, Cazzani A, Poppi S, Sanna G, Solci M, Stochino F, Turco E. The Sardinia Radio Telescope: A comparison between close-range photogrammetry and finite element models. Mathematics and Mechanics of Solids, 2017, 22(5): 1005–1026
Stochino F, Cazzani A, Poppi S, Turco E. Sardinia radio telescope finite element model updating by means of photogrammetric measurements. Mathematics and Mechanics of Solids, 2017, 22(4): 885–901
Liu G R. The smoothed finite element method (S-FEM): A framework for the design of numerical models for desired solutions. Frontiers of Structural and Civil Engineering, 2019, 13(2): 456–477
Acknowledgements
The financial support of the Autonomous Region of Sardinia under Grant PO-FSE 2014–2020, CCI: 2014-IT05SFOP021, through the project “Retrofitting, Rehabilitation and Requalification of the Historical Cultural Architectural Heritage (R3-PAS)” is acknowledged by Flavio Stochino.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pani, L., Stochino, F. Punching of reinforced concrete slab without shear reinforcement: Standard models and new proposal. Front. Struct. Civ. Eng. 14, 1196–1214 (2020). https://doi.org/10.1007/s11709-020-0662-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-020-0662-z