Abstract
The seismic behavior of Tire Derived Aggregate (TDA) used as backfill material of 6.10 m high retaining walls was investigated based on nonlinear time-history Finite Element Analysis (FEA). The retaining walls were semi-gravity reinforced concrete cantilever type. In the backfill, a 2.74 m thick conventional soil layer was placed over a 3.06 m thick TDA layer. For comparison purpose, a conventional all soil-backfill model was also developed, and the analysis results from the two models under the Northridge and Takatori earthquakes were compared. The FEA results showed that both models did not experience major damage in the backfill under the Northridge earthquake. However, under the Takatori earthquake, the TDA-backfill model developed substantially large displacement in the retaining walls and in the backfill compared with the soil-backfill model. Regions of large plastic strain were mainly formed in the TDA layer, and the soil over the TDA layer did not experience such large plastic strain, suggesting less damage than the soil-backfill model. In addition, the acceleration on the backfill surface of the TDA-backfill model decreased substantially compared with the soil-backfill model. If an acceleration sensitive structure is placed on the surface of the backfill, the TDA backfill may induce less damage to it.
Similar content being viewed by others
References
RMA. U.S. Scrap Tire Management Summary. Rubber Manufacturers Association, 2013
Basel Convention. Technical guidelines for the environmentally sound management of used and waste pneumatic tyres, 2011
ETRMA. End of life tyres: A valuable resource with growing potential. European Tyre and Rubber Manufacturers’ Association, 2011
WBCSD. End-of-Life Tires (ELTs): a Framework for Effective Management Systems. World Business Council for Sustainable Development, 2010
Humphrey D N. Scrap tires in local construction projects. In: Where the Rubber Meets the Road. 2004
ASTM. ASTM Standard D6270: Standard Practice for Use of Scrap Tires in Civil Engineering Applications. West Conshohocken, PA: ASTM International, 2008
Ahn I S, Cheng L, Fox P, Wright J, Patenaude S, Fujii B. Material properties of large-size Tire Derived Aggregate for civil engineering applications. Journal of Materials in Civil Engineering, 2015, 27(9): 04014258
Humphrey D N. Civil engineering applications of tire shreds. In: The Tire Industry Conference. Hilton Head, SC, 1999
Lee H, Roh H. The use of recycled tire chips to minimize dynamic earth pressure during compaction of backfill. Construction & Building Materials, 2007, 21(5): 1016–1026
Dodson T. Camas Valley-Nuns Creek, Highway 35 Landslide: Plans, Construction Sequencing and Staging. Oregon State Highway Division, Geotechnical Group, 1990
Edil T B, Bosscher P J, Eldin N N. Development of Engineering Criteria for Shredded or Whole Tires in Highway Applications (Interim Report). Wisconsin Department of Transportation, 1990
Geisler E, Cody W K, Niemi M K. Tires for subgrade support. In: Annual Conference on Forest Engineering. Coeur D’Alene, ID, 1989
Humphrey D N. Specifications-Test section, Tire chip fill as insulation, Richmond, Maine. Dept. of Civil Eng., University of Maine: Orono, Maine,1992
Kasampalis T, Perkoulidis G, Karagiannidis A.Sensitivity Analysis of Different Construction, Financial and Logistics Schemes. Laboratory of Heat Transfer and Environmental Engineering, Aristotle University Thessaloniki, 2011
Humphrey D N. Tire derived aggregate as lightweight fill for embankments and retaining walls. In: Hazarika, Yasuhara, eds. Scrap Tire Derived Geomaterials-Opportunities and Challenges. London: Taylor & Francis Group,2008
Humphrey D N, Whetten N, Weaver J, Recker K, Cosgrove T A. TDA as lightweight fill for embankments and retaining walls. In: Recycled Materials in Geotechnical Applications. ASCE, 1998
Nelson B E. Using tire chips for roadway embankment fill. In: N.Y. State TDA Workshop, 2009
Whetten N, Weaver J, Humphrey D N, Stanford T. Rubber meets the road in Maine. Civil Engineering (New York, N.Y.), 1997, 67(9): 60–63
Reid R A, Soupir S P. Mitigation of void development under bridge approach slabs using rubber tire chips. In: Recycled Materials in Geotechnical Applications, ASCE, 1998
Tatlisoz N, Edil T B, Benson C H. Interaction between reinforcing geosynthetics and soil-tire chip mixtures. Journal of Geotechnical and Geoenvironmental Engineering, 1998, 124(11): 1109–1119
Tweedie J J, Humphrey D N, Sandford T C. Tire shreds as lightweight retaining wall backfill: active conditions. Journal of Geotechnical and Geoenvironmental Engineering, 1998, 124(11): 1061–1070
Tweedie J J, Humphrey D N, Stanford T C. Full scale field trials of tire chips as lightweight retaining wall backfill, at-rest conditions. In: Transportation Research Record 1619. Transportation Research Board, 1998, 64–71
Humphrey D N, Eaton R A. Field performance of tire chips as subgrade insulation for rural roads. In: the Sixth International Conference on Low-Volume Roads. Transportation Research Board, 1995
Lawrence B, Humphrey D N, Chen L H. Field trial of tire shreds as insulation for paved roads. In: The Tenth International Conference on Cold Regions Engineering: Putting Research into Practice. ASCE, 1999
Wolfe S L, Humphrey D N, Wetzel E A. Development of tire shred underlayment to reduce groundborn vibrations from LTR track. In: GeoTrans 2004. ASCE, 2004
Jesionek K S, Humphrey D N, Dunn R J. Overview of shredded tire applications in landfills. In: Tire Industry Conference. Clemson Univ., South Carolina, 1998
Park J K, Edil T B, Kim J Y, Huh M, Lee S H, Lee J J. Suitability of shredded tires as a substitute for a landfill leachate collection medium. Waste Management & Research, 2003, 21(3): 278–289
Lassiter A. Septic system trench TDA-a national overview. In: New York State TDA Workshop, 2009
Zicari L. New York state Tire Derived Aggregate program. In: New York State TDA Workshop, 2009
Tweedie J J, Humphrey D N, Sandford T C. Tire shreds as lightweight retaining wall backfill: active conditions. Journal of Geotechnical and Geoenvironmental Engineering, 1998, 124(11): 1061–1070
Ahn I S, Cheng L. Tire Derived Aggregate for retaining wall backfill under earthquake loading. Construction & Building Materials, 2014, 57: 105–116
Mock E, Cheng L. Performance of retaining walls with and without sound wall under seismic load. Earthquakes and Structures. 2015, 7 (6): 909–935
Caltrans. Revised Standard Plan RSP B3-1A, in Retaining Wall Type 1 (Case 1). Sacramento, CA: California Department of Transportation, 2012
Caltrans. Bridge Design Specifications. Sacramento, CA: California Department of Transportation, 2004
Mualchin L. Seismic hazard assessment for bridge engineering in California. In: the 13th World Conference on Earthquake Engineering. Vancouver, B.C., Canada, 2004
Humphrey D N. Civil Engineering Applications Using Tire Derived Aggregate (TDA). California Integrated Waste Management Board, 2003
Ahn I S, Cheng L. Retaining Wall Shake-Table Test and Design using Tire Derived Aggregates as Backfill. California Department of Resources Recycling and Recovery; California Department of Transportation. University of California-Davis, 2014
Acknowledgements
The present research was partially sponsored by California’s Department of Resource Recycling and Recovery (CalRecycle), in cooperation with California Department of Transportation (Caltrans). The opinions and conclusions expressed in this paper are those of the authors. They do not necessarily represent those of the sponsors.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ahn, IS., Cheng, L. Seismic analysis of semi-gravity RC cantilever retaining wall with TDA backfill. Front. Struct. Civ. Eng. 11, 455–469 (2017). https://doi.org/10.1007/s11709-017-0392-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-017-0392-z