Abstract
The failure analysis of the high-strength bolt at root position of the wind turbine blade was conducted to find the cause of fracture. Detailed investigations using several characterization techniques such as stress calculation, chemical composition test, mechanical property test, metallurgical investigation, and fractography analysis were performed to identify the cause of the bolt failure. Based on the theoretical calculation and failure analysis, it could be concluded that the bolt failed by fatigue accelerated by stress concentration while under low temperature. Practical suggestions were also given to avoid similar failures.
Similar content being viewed by others
References
Spera, D.A.: Wind Turbine Technology (Fundamental Concepts of Wind Turbine Engineering). ASME Press, New York (1994)
de Castro, P.M.S.T., Fernandes, A.A.: Methodologies for failure analysis: a critical survey. Mater. Des. 5(25), 117–123 (2004)
Yu, V.Y., Kohl, J.G., Crapanzano, R.A., Davies, M.W., Elam, A.G., Veach, M.K.: Failure analysis of the M16 rifle bolt. Eng. Fail. Anal. 12, 746–754 (2005)
Asi, O.: Failure of a stud bolt in a ring spinning frame textile machine. Eng. Fail. Anal. 13, 963–970 (2006)
Chen, H.S., Tseng, P.T., Hwang, S.F.: Failure analysis of bolts on an end flange of a steam pipe. Eng. Fail. Anal. 13, 656–668 (2006)
Lacalle, R., Cicero, S., Ferreno, D., Alvarez, J.A.: Failure analysis of a bolt in a scaffolding system. Eng. Fail. Anal. 15, 237–246 (2008)
Huda, Z.: Metallurgical failure analysis for a blade failed in a gas-turbine engine of a power plant. Mater. Des. 30, 3121–3125 (2009)
Khan, A.N., Salam, I.: Failure analysis of ferritic stainless steel locking ring. Mater. Des. 30, 4454–4458 (2009)
Lee, Y.H., Kim, H.K.: Failure analysis of a pressure vessel bolt in a nuclear fuel fretting wear simulator. Eng. Fail. Anal. 18, 1735–1741 (2011)
Krishnaraj, N., Srinivasan, P.B., Muthupandi, V.: Investigation of a mounting bolt failure in an automobile air brake assembly. Fail. Anal. Prev. 3(5), 69–72 (2003)
VDI 2230 Part 1: Systematic Calculation of High Duty Bolted Joints: Joints with One Cylindrical Bolt (2003)
Acknowledgment
This study was supported by the Fundamental Research Funds for the Central Universities under Grant No. FRF-BR-10-007A and No. FRF-AS-09-001A.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, D., Shang, X. Failure Investigation of the Wind Turbine Blade Root Bolt. J Fail. Anal. and Preven. 13, 333–339 (2013). https://doi.org/10.1007/s11668-013-9675-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11668-013-9675-4