Abstract
Aluminum nitride is a promising material for structural and functional applications. Cubic AlN (c-AlN) is expected to have higher thermal conductivity due to their high symmetry; however, its fabrication is difficult. In this study, c-AlN was synthesized by atmospheric plasma spray process through the reaction between Al feedstock powder and nitrogen plasma. Al powders were supplied to the plasma stream by Ar carrier gas and reacted with surrounding N2 plasma, then deposit onto substrate. The obtained coatings were c-AlN/Al mixture at 150 mm of spray distance, and the nitride content was improved by increasing the spray distance. The coatings almost consist of c-AlN at 300 mm of spray distance. The coatings thickness decreased from 100 to 10 μm with increasing spray distance from 150 to 300 mm. Using carrier gas, N2 enable to fabricate thick c-AlN coating with hardness 1020 Hv.
Similar content being viewed by others
References
H.O. Pierson, Handbook of Refractory Carbides and Nitrides, Noyes Publications, NJ, USA, 1996, p 237-239
A.W. Wemer, Carbide, Nitride and Boride Materials Synthesis and Processing, Chapman & Hall, London, 1997, p 6-68
A.W. Weimer, G.A. Cochran, G.A. Eisman, J.P. Henley, B.D. Hook, L.K. Mills, T.A. Guiton, A.K. Knudsen, N.R. Nicholas, J.E. Volmering, and W.G. Moore, Rapid Process for Manufacturing Aluminum Nitride Powder, J. Am. Ceram. Soc., 1994, 77(3), p 3-18
S. Nakamura, The Roles of Structural Imperfections in InGaN-Based Blue Light-Emitting Diodes and Laser Diodes, Science, 1998, 281, p 956-961
N. Ichinose and H. Kuwabara, Nitride Ceramics, Nikkan-Kogyo-Shinbunsha, Tokyo, 1998 (in Japanese)
Y. Qiu and L. Gao, Nitridation Reaction of Aluminum Powder in Flowing Ammonia, J. Eur. Ceram. Soc, 2003, 23, p 2015-2022
T. Sakurai, O. Yamada, and Y. Miyamoto, Combustion Synthesis of Fine AlN Powder and Its Reaction Control, Mater. Sci. Eng. A, 2006, 415, p 40-44
S.-L. Chung, W.-L. Yu, and C.-N. Lin, A Self-Propagating High-Temperature Synthesis Method for Synthesis of AlN Powder, J. Mater. Res., 1999, 14(5), p 1928-1933
Z.Y. Fu, J.F. Liu, H. Wang, D.H. He, and Q.J. Zhang, Spark Plasma Sintering of Aluminium Nitride Transparent Ceramics, Mater. Sci. Technol, 2004, 20, p 1097-1099
T. Shirakami, K. Urabe, H. Nakano, T. Meguro, K. Komeya, and N.H. Kim, Microstructural Evolution during Sintering of Aluminum Nitride Ceramics Doped with Alumina and Yttria, J. Am. Ceram. Soc., 2001, 84(3), p 631-635
K. Komeya and H. Inoue, The Effects of Particle Size of AlN and Composition on Sintering with Nitriding Reaction of the System AlN-Al, J. Jpn. Soc. Powder Powder Metall., 1970, 17(3), p 108-115
D.D. Marchant and T.E. Nemecek, Aluminum Nitride: Preparation, Processing and Properties, Adv. Ceram., 1989, 26, p 19-54
S. Winsztal, B. Wnuk, H. Majewska-Minor, and T. Niemyski, Aluminium Nitride Thin Films and Their Properties, Thin Solid Films, 1976, 32, p 251-254
V. Mortet, A. Vasin, P.-Y. Jouan, O. Elmazria, and M.-A. Djouadi, Aluminium Nitride Films Deposition by Reactive Triode Sputtering for Surface Acoustic Wave Device Applications, Surf. Coat. Technol., 2003, 176, p 88-92
A. Mahmood, N. Rakov, and M. Xiao, Influence of Deposition Conditions on Optical Properties of Aluminum Nitride (AlN) Thin Films Prepared by DC-Reactive Magnetron Sputtering, Mater. Lett., 2003, 57, p 1925-1933
Q.S. Paduano, D.W. Weyburne, J. Jasinski, and Z. Liliental-Weber, Effect of Initial Process Conditions on the Structural Properties of AlN Films, J. Crys. Growth, 2004, 261, p 259-265
S. Strite and H. Morkoç, GaN, AlN, and InN: A Review, J. Vac. Sci. Technol. B, 1992, 10(4), p 1237-1266
I. Petrov, E. Mojab, R.C. Powell, J.E. Greene, L. Hultman, and J.-E. Sundgren, Synthesis of Metastable Epitaxial Zinc-Blende-Structure AIN by Solid-State Reaction, Appl. Phys. Lett., 1992, 60(20), p 2491-2493
J. Wang, W.L. Wang, P.D. Ding, Y.X. Yang, L. Fang, J. Esteve, and M.C. Polo, Synthesis of Cubic Aluminum Nitride by Carbothermal Nitridation Reaction, Diam. Relat. Mater., 1999, 8, p 1342-1344
T. Mashimo, M. Uchino, A. Nakamura, T. Kobayashi, E. Takasawa, T. Sekine, Y. Noguchi, H. Hikosaka, K. Fukuoka, and Y. Syono, Yield Properties, Phase Transition, and Equation of State of Aluminum Nitride (AlN) Under Shock Compression up to 150 GPa, J. Appl. Phys., 1999, 86(12), p 6710-6716
J. Kuang, C. Zhang, X. Zhou, Q. Liu, and C. Ye, Formation and Characterization of Cubic AlN Crystalline in a Carbothermal Reduction Reaction, Mater. Lett., 2005, 59, p 2006-2010
H.U. Joo, S. Chae, and W. Jung, Is It Possible to Synthesize Cubic Aluminum Nitride by the Carbothermal Reduction and Nitridation Method?, Diam. Relat. Mater., 2008, 17, p 352-355
K. Sardar, M. Dan, B. Schwenzer, and C.N.R. Rao, A Simple Single-Source Precursor Route to the Nanostructures of AlN, GaN and InN, J. Mater. Chem., 2005, 15, p 2175-2177
X.P. Hao, M.Y. Yu, D.L. Cui, X.G. Xu, Y.J. Bai, Q.L. Wang, and M.H. Jiang, Synthesize AlN Nanocrystals in Organic Solvent at Atmospheric Pressure, J. Cryst. Growth, 2002, 242, p 229-232
L. Li, X. Hao, N. Yu, D. Cui, X. Xu, and M. Jiang, Low-Temperature Solvent Thermal Synthesis of Cubic AlN, J. Cryst. Growth, 2003, 258, p 268-271
A. Iwata, J. Akedo, and M. Lebedev, Cubic Aluminum Nitride Transformed Under Reduced Pressure Using Aerosol Deposition Method, J. Am. Ceram. Soc., 2005, 88(4), p 1067-1069
A. Iwata and J. Akedo, Hexagonal to Cubic Crystal Structure Transformation During Aerosol Deposition of Aluminum Nitride, J. Crys. Growth, 2005, 275, p e1269-e1273
L.R. Krishna, D. Sen, Y.S. Rao, G.V.N. Rao, and G. Sundararajan, Thermal Spray Coating of Aluminum Nitride Utilizing the Detonation Spray Technique, J. Mater. Res., 2002, 17(10), p 2514-2523
L.H. Cao, K.A. Khor, L. Fu, and F. Boey, Plasma Spray Processing of Al2O3/AlN Composite Powders, J. Mater. Process. Technol., 1999, 89-90, p 392-398
F. Kassabji, F. Tourenne, A. Derradji, and P. Fauchais, Aluminum and Aluminum Nitride Deposition by Low Pressure Nitrogen Arc Plasma Spraying, Proc. 10th Int. Therm. Spray Conf., Vol 80, 1983, p 82-84
A. Ohmori, M. Wakamatsu, and K. Kamada, Synthesis of Al2O3-AlN Coating by Low Pressure Plasma Spraying and Nitriding, Trans. JWRI, 1993, 22(2), p 227-232
K.A. Khor, F.Y.C. Boey, X.L. Zhao, and L.H. Cao, Aluminium Nitride by Plasma Spraying of an Al2O3-C-Sm2O3 System, Mater. Sci. Eng. A, 2001, 300, p 203-210
M. Yamada, T. Yasui, M. Fukumoto, and K. Takahashi, Nitridation of Aluminum Particles and Formation Process of Aluminum Nitride Coatings by Reactive RF Plasma Spraying, Thin Solid Films, 2007, 515(9), p 4166-4171
M. Fukumoto, M. Yamada, T. Yasui, and K. Takahashi, Fabrication of Aluminum Nitride Coating by Reactive RF Plasma Spray Process, Proc. International Thermal Spray Conference (ITSC), 2004, CD
M. Yamada, Y. Kouzaki, T. Yasui, and M. Fukumoto, Fabrication of Iron Nitride Coatings by Reactive RF Plasma Spraying, Surf. Coat. Technol., 2006, 201, p 1745-1751
M. Yamada, T. Inamoto, M. Fukumoto, and T. Yasui, Fabrication of Silicon Nitride Thick Coatings by Reactive RF Plasma Spraying, Mater. Trans., 2004, 45, p 3304-3308
C. Lin and S. Chung, Combustion Synthesis of Aluminum Nitride Powder Using Additives, J. Mater. Res., 2001, 16(8), p 2200-2208
S. Sampath, X.Y. Jiang, J. Matejicek, A.C. Leger, and A. Vardelle, Substrate Temperature Effects on Splat Formation, Microstructure Development and Properties of Plasma Sprayed Coatings. Part I: Case Study for Partially Stabilized Zirconia, Mater. Sci. Eng. A, 1999, 272, p 181-188
S. Sampath and X. Jiang, Splat Formation and Microstructure Development During Plasma Spraying: Deposition Temperature Effects, Mater. Sci. Eng. A, 2001, 304-306, p 144-150
H.R. Salimijazi, L. Pershin, T.W. Coyle, J. Mostaghimi, S. Chandra, Y.C. Lau, L. Rosenzweig, and E. Moran, Effect of Droplet Characteristics and Substrate Surface Topography on the Final Morphology of Plasma-Sprayed Zirconia Single Splats, J. Therm. Spray Technol., 2007, 16(2), p 291-299
H. Zhang, X.Y. Wang, L.L. Zheng, and S. Sampath, Numerical Simulation of Nucleation, Solidification, and Microstructure Formation in Thermal Spraying, Int. J. Heat Mass Trans., 2004, 47, p 2191-2203
T. Chraska and A.H. King, Transmission Electron Microscopy Study of Rapid Solidification of Plasma Sprayed Zirconia. Part I. First Splat Solidification, Thin Solid Films, 2001, 397, p 30-39
P. Duwez, R.H. Willen, and W. Klement, Continuous Series of Metastable Solid Solutions in Silver-Copper Alloys, J. Appl. Phys., 1960, 31, p 1136-1137
R.A. Rodriguez-Diaz, L. Banos, O. Novelo, C. Flores, J. Colin, J. Arenas-Alatorre, and J.A. Juarez-Islas, Microstructural Characterization of Fe40Al15Cr (% at.) Intermetallic Alloy Produced by Rapid Solidification, Acta Microsc., 2009, 18(2), p 169-173
D.J. Tilly, J.P.A. Lofvander, and C.G. Levi, Solidification Paths and Carbide Morphologies in Melt Processed MoSi2-SiC In Situ Composites, Metall. Mater. Trans., 1996, 28A, p 1889-1900
M.J. Kramer, H. Mecco, K.W. Dennis, E. Vargonova, R.W. McCallum, and R.E. Napolitano, Rapid Solidification and Metallic Glass Formation—Experimental and Theoretical Limits, J. Non-Cryst. Solids, 2007, 353, p 3633-3639
J. Kong, Z. Ye, and F. Lv, Non-Equilibrium Solidification Character of Zr56.2Ti13.8Nb5.0Cu6.9Ni5.6Be12.5 Bulk Metallic Glass Composites Containing Ductile Dendrite Phase, J. Alloys Comp., 2009, 478, p 202-205
I. Kimura, K. Ichiya, M. Ishii, N. Hotta, and T. Kitamura, Synthesis of Fine AlN Powder by a Floating Nitridation Technique Using an N2/NH3 Gas Mixture, J. Mater. Sci. Lett., 1989, 8, p 303-304
T. Fujii, K. Yoshida, K. Suzuki, and S. Ito, Direct Nitriding of Large Grains of Aluminum with 2 mm Size, Solid State Ionics, 2001, 141-142, p 593-598
M. Radwan and Y. Miyamoto, Growth of Quasi-Aligned AlN Nanofibers by Nitriding Combustion Synthesis, J. Am. Ceram. Soc., 2007, 90(8), p 2347-2351
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shahien, M., Yamada, M., Yasui, T. et al. Cubic Aluminum Nitride Coating Through Atmospheric Reactive Plasma Nitriding. J Therm Spray Tech 19, 635–641 (2010). https://doi.org/10.1007/s11666-010-9469-0
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11666-010-9469-0