Abstract
This article critically assesses literature estimates of the major physical parameters associated with direct reduction in iron ore/coal composites, including heats of reactions, specific heats, composition, porosity, density, shrinkage, swelling, and thermal conductivity. Where estimates are not available, new formulae are given. In particular, this article focuses on the temperature dependence of certain parameters, since this is required for the development of mathematical models. The article also highlights areas of investigation, where the parameter estimates are in need of further experimental research or where different authors provide conflicting estimates. The results are of more general applicability than to coal-based direct reduction of iron ore and will be useful for researchers investigating any form of direct reduction of iron ore.
Similar content being viewed by others
References
J. Yagi and J. Szekely: Trans. Iron Steel Inst. Jpn., 1977, vol. 17, pp. 569–75.
O. Knacke, O. Kubaschewski, and K. Heselmann: Thermochemical Properties of Inorganic Substances, Springer-Verlag, New York, NY, 1991, pp. 264–812.
Perry’s Chemical Engineers’ Handbook, H. Perry, late ed., McGraw-Hill, New York, NY, 1997, pp. 2.161–2.195.
I. Barin: Thermochemical Data of Pure Substances, VCH Verlagsgessellschaft, Weinheim, 1995, pp. 209–720.
M. Chase, C. Davies, J. Downey, D. Frurip, R. McDonald, and A. Syverud: JANAF Thermochemical Tables, J. Phys. Chem. Ref. Data, New York, NY, American Institute of Physics, 1985, vol. 14, Suppl. No. 1, pp. 535–1280.
CRC Handbook of Chemistry and Physics, D. Lide, ed., CRC Press, Boca Raton, FL, 1997, pp. 5.4–5.78.
H. Ross: in Direct Reduced Iron. Technology and Economics of Production and Use, R.L. Stephenson and R.M. Smailer, eds., ISS-AIME, Warrendale, PA, 1980, pp. 9–25.
O. Kubaschewski, C. Alcock, and P. Spenser: Materials Thermochemistry, Pergamon Press, Oxford, United Kingdom, 1993, pp. 258–323.
Properties of Selected Ferrous Alloying Elements, C. Ho, ed., Hemisphere Publishing Corporation, New York, 1989, pp. 95–147.
J. Coughlin, E. King, and K. Bonnickson: J. Am. Chem. Soc., 1951, vol. 73, pp. 3891–93.
E.M. Donskoi, F. Liu, and D.L.S. McElwain: Computational Techniques and Applications: CTAC97, World Scientific Publishing Co, Singapore, 1998, pp. 193–200.
E. Donskoi and D.L.S. McElwain: Ironmaking and Steelmaking, 2001, vol. 28 (5), pp. 1–6.
N.Y. Kirov: Br. Coal Utilisation Res. Assoc., 1965, vol. 29, pp. 33–57.
G. Reddy, T. Sharma, and S. Chakravorty: Ironmaking and Steelmaking, 1991 vol. 18 (3), pp. 211–13.
S. Dey, B. Jana, and A. Basumallick: Iron Steel Inst. Jpn. Int., 1993, vol. 33 (7), pp. 735–39.
S. Chakravorty, G. Reddy, and T. Sharma: Trans. Ind. Inst. Met., 1991, vol. 44 (1), pp. 1–7.
E. Donskoi and D.L.S. McElwain: Metall. Trans. Mater., in press.
Q. Wang, Z. Yang, J. Tian, W. Li, and J. Sun: Ironmaking and Steelmaking, 1998, vol. 25, pp. 443–47.
R. Carvalho, P. Netto, and L. D’Abreu: Can. Met. Q., 1994, vol. 33, pp. 217–25.
B. Huang and W. Lu: Iron Steel Inst. Jpn. Int., 1993, vol. 33, pp. 1055–61.
S. Sun and W. Lu: Iron Steel Inst. Jpn. Int., 1993, vol. 33, pp. 1062–69.
C. Seaton, J. Foster, and J. Velasco: Trans. Iron Steel Inst. Jpn. Int., 1983, vol. 23, pp. 497–503.
C. Seaton, J. Foster, and J. Velasco: Trans. Iron Steel Inst. Jpn. Int., 1983, vol. 23, pp. 490–96.
R. Nascimento, M. Mourao, and J. Capocchi: Ironmaking and Steelmaking, 1999, vol. 26 (3), pp. 182–86.
T. Sharma: Ironmaking and Steelmaking, 1993, vol. 20, pp. 362–65.
G. McAdam, D. O’Brien, and T. Marshall: Ironmaking and Steelmaking, 1977, vol. 1, pp. 1–9.
S. Sun: Ph.D. Thesis, McMaster University, Hamilton, ON, Canada, 1997.
S. Sun and W. Lu: Iron Steel Inst. Jpn. Int., 1999, vol. 39 (2), pp. 130–38.
J. Bear: Dynamics of Fluids in Porous Media, Dover Publications, Inc., New York, NY, 1972, pp. 641–63.
B. Atkinson and D. Merrick: Fuel, 1983, vol. 62, pp. 553–61.
D. Rosner: Transport Processes in Chemically Reacting Flow Systems, Butterworth and Co., Boston MA, 1986, pp. 113–16.
T. Akiyama, H. Ohta, R. Takahashi, Y. Waseda, and J. Yagi: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 829–37.
G. Dul’nev and Y. Zarichnyak: Heat Transfer-Sov. Res., 1970, vol. 2 (4), pp. 89–107.
W.M. Rohsenow, J.P. Hartnett, and E.N. Ganic: Heat Transfer Fundamentals, 2nd ed., McGraw-Hill Book Co., New York, NY, 1985, p. 3.116.
M. Allibert, H. Gaye, J. Geiseler, et al.: Slag Atlas, 2nd ed., Verlag Stahleisen GmbH, Dusseldorf, 1995, pp. 591–600.
Y.S. Touloukian: Thermophysical Properties of Matter, vol. 3, Thermal Conductivity, Nonmetallic Liquids and Gases, IFI/Plenum, New York, NY, 1970.
J.K. Gray and R. Muller: Heat Transfer from Flames, Elek, London, 1976, pp. 37–38.
C.L. Yaws: Handbook of Transport Property Data: Viscosity, Thermal Conductivity, and Diffusion Coefficients of Liquids and Gases, Gulf, Houston, TX, 1995.
R.C. Reid, J.M. Prausnitz, and B.E. Poling: The Properties of Gases and Liquids, McGraw-Hill, New York, NY, 1987, pp. 515–17.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Donskoi, E., McElwain, D.L.S. Estimation and modeling of parameters for direct reduction in iron ore/coal composites: Part I. Physical parameters. Metall Mater Trans B 34, 93–102 (2003). https://doi.org/10.1007/s11663-003-0059-0
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11663-003-0059-0