References
X. Liu, O. Wijk, R. Salin, and J.O. Edstrom: Steel Res., 1995, vol. 66 (3), pp. 90–102.
P.N. Chaudhary: Ph.D. Thesis, Indian Institute of Technology, Kharagpur, 2000.
M.F. Sidorenko: SCANINJECT II, 2nd Int. Conf. on Injection Metallurgy, Lulea, Sweden, June 12–13, 1980, pp. 3.01–3.18.
M. Turunen: Jernkontorets Ann., 1975, vol. 159, p. 7.
S. Tanaka, T. Ohno, S. Mizoguchi, and H. Horiguchi: Tetsu-to-Hagané, 1980, vol. 66, pp. S262.
K. Wada, S. Ogibayashi, K. Shimomura, S. Ariga, H. Nakashima, and S. Tsuruoka: SCANINJECT II, 2nd Int. Conf. on Injection Metallurgy, Lulea, Sweden, June 12–13, 1980, pp. 21.01–21.15.
H. Tanabe, M. Hirano, T. Hirose, K. Taguchi, T. Usui, and R. Imai: Tetsu-to-Hagané, 1980, vol. 66, p. S258.
S. Ohguchi and D.G.C. Robertson: Ironmaking and Steelmaking, 1984, vol. 11 (6), pp. 262–73.
Varadrajan Seshadri, Carlos Antonio da Silva, Itavahn Alves da Silva, and Paulo Von Kruger: Iron Steel Inst. Jpn. Int., 1997, vol. 37 (1), pp. 21–30.
B. Deo and R. Boom: Fundamentals of Steel Making Metallurgy, Prentice-Hall, New York, NY, 1993.
T.A. Engh, H. Sandberg, L.G. Hultkvist, and L.C. Norberg: Scand. J. Metall., 1972, vol. 1, p. 103.
S.V. Patankar: Numerical Heat Transfer and Fluid Flow, Taylor and Francis, Philadelphia, PA, 1980.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Roy, G.G., Chaudhary, P.N., Minj, R.K. et al. Dephosphorization of ferromanganese using BaCO3-based fluxes by submerged injection of powders: A preliminary kinetic study. Metall Mater Trans B 32, 558–561 (2001). https://doi.org/10.1007/s11663-001-0041-7
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11663-001-0041-7