Abstract
The moving direction of the grain boundary (GB), after solidification in the weld metal of AISI310S stainless steel, was examined through a computer simulation technique using the vertex dynamics model and by observing the microstructure. The results are as follows. (1) The grain-growth exponent in the vertex model was fitted to describe the experimental data. (2) The vertex dynamics model can predict the moving direction of a grain boundary in the weld metal after solidification.
Similar content being viewed by others
References
T. Watanabe, K. EI, and H. Nakamura: J. High-Temp. Soc., 1988, vol. 14-4, pp. 185–90 (in Japanese).
S. Shibata, T. Watanabe, S. Mekaru, and I. Fukumoto: Q. J. Jpn. Weld. Soc., 1996, vol. 14–2, pp. 376–81 (in Japanese).
S. Shibata, T. Watanabe, S. Mekaru, and I. Fukumoto: Q. J. Jpn. Weld. Soc., 1997, vol. 15–1, pp. 100–07 (in Japanese).
W.F. Savage, E.F. Nippes, and T.W. Miller: Weld. J., 1965, vol. 44 (4), pp. 175–81.
W.F. Savage, E.F. Nippes, and T.W. Miller: Weld. J., 1976, vol. 58 (7), pp. 181–87.
W.W. Mullins: J. Appl. Phys., 1956, vol. 27, p. 900.
J.W. Rutter and K.T. Aust: Acta Metall., 1965, vol. 13, pp. 181–86.
K. Kawasaki, T. Nagai, and K. Nakashima: Phil. Mag. B, 1989, vol. 60 (3), pp. 399–421.
D. Weaire and N. Rivier: Contemp. Phys., 1984, vol. 25 (1), pp. 50–99.
S. Shibata and T. Watanabe: J. High-Temp. Soc., 1994, vol. 20–2, pp. 69–78 (in Japanese).
H.V. Atkinson: Acta Metall., 1988, vol. 36, pp. 469–91.
J.E. Burke and D. Turnbull: Progr. Met. Phys., 1952, vol. 3, pp. 220–92.
N. Rivier: Phil. Mag. B, 1985, vol. 52 (3), pp. 795–819.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Shibata, S., Watanabe, T. Direction of grain-boundary migration in the weld metal of an austenitic stainless steel. Metall Mater Trans A 30, 621–626 (1999). https://doi.org/10.1007/s11661-999-0053-5
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-999-0053-5