References
O. Kato and T. Kawanami: J. JSTP, 1987, vol. 28, pp. 264–71.
O. Kato and T. Kawanami: J. JSTP, 1989, vol. 30, pp. 103–09.
S. Uchida, H. Yamamoto, M. Ataka, K. Watanabe, and O. Kato: “What’s New in Roll Technologies of the World,” Report of the Research Committee on Rolling Roll, The Iron and Steel Institute of Japan, 1995, pp. 185–91.
J.C. Werquin and J.C. Cailand: in Roll for the Metal Working Industries, R.B. Corbett, ed., Iron and Steel Society, Inc., Warrendale, PA, 1990, pp. 55–71.
S. Lee, D.H. Kim, J.H. Ryu, and K. Shin: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 0000–00.
J.E. Shingly and C.R. Mischke: Mechanical Engineering Design, McGraw-Hill, New York, NY, 1983, pp. 85–89.
Y.Y. Lee, H. Kim, O. Kwon, K.S. Kim, Y.K. Lee, C. Chull, K. Kim, and B.S. Woo: Technical Report, Research Institute of Industrial Science and Technology, Pohang, Korea, 1992, pp. 138–64.
W.F. Smith: Structures and Properties of Engineering Alloys, McGraw-Hill, New York, NY, 1981, ch. 7.
J.M. Berry: ASM Trans., 1959, vol. 51, p. 556.
D. Broek: Elementary Engineering Fracture Mechanics, 3rd ed., Martinus Nijhoff Publishers, Dordrecht, The Netherlands, 1982, pp. 40–47.
C.D. Beachem and G.R. Yoder: Metall. Trans. A, 1973, vol. 4, pp. 1145–53.
J.R. Rice and M.A. Johnson: in Inelastic Behavior of Solids, M.F. Kanninen, W.F. Adler, A.R. Rosenfield, and R.I. Jaffee, eds., McGraw-Hill, New York, NY, 1970, pp. 641–70.
Author information
Authors and Affiliations
Additional information
This work was supported by Pohang Iron and Steel Co. (POSCO) under Contract No. 95Y 104.
Rights and permissions
About this article
Cite this article
Lee, S., Jin, W., Suh, D. et al. Sticking mechanism during hot rolling of two stainless steels. Metall Mater Trans A 29, 696–702 (1998). https://doi.org/10.1007/s11661-998-0151-9
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-998-0151-9