Abstract
A novel single-step surface-treatment process is demonstrated for forming Cr-nitride coatings on steels. The process was carried out at 1327 K (1100 °C) for two steel grades with differing carbon concentrations. For steel grade with 0.42 to 0.5C (wt pct), the coatings formed consisted of an outer Cr2N layer and an inner Cr-carbide layer with a Cr-enriched interdiffusion zone underneath. However, for steel grade with C ≤ 0.17 wt pct, the inner Cr-carbide layer was absent.
References
T. Hurkmans, D.D. Lewis, J.S. Brooks, W.D. Münz: Surf. Coat. Technol., 1996, vol. 86-87, pp. 192–199.
Ghislaine Bertrand, Catherine Savall, Cathy Meunier: Surf. Coat. Technol., 1997, vol. 96, pp. 323-329.
Jianliang Lin, William D. Sproul, John J. Moore: Mater. Letters, 2012, vol. 89, pp. 55–58.
A. Gilewicz, P. Chmielewska, D. Murzynski, E. Dobruchowska, B.Warcholinski: Surf. Coat. Technol., 2016, vol. 299, pp. 7–14.
M.P. Brady, K. Weisbrod, I. Paulauskas, R.A. Buchanan, K.L. More, H. Wang, M. Wilson, F. Garzon, L.R. Walker: Scr. Mater., 2004, vol. 50, pp. 1017–1022.
Rujin Tian: J. Power Sources, 2011, vol. 196, pp. 1258–1263.
Seok-Hee Lee, Tae-Hyun Yang, Sang-Hoon Hyun, Young-Soo Yoon: Corros. Sci., 2012, vol. 58, pp. 79–85.
T. Bell: Surf. Eng., 2002, vol. 18, pp. 415-22.
Peter Schaaf: Prog. Mater. Sci., 2002, vol. 47, pp. 1-161.
R.E. Schacherl, P.C.J. Graat and E.J. Mittemeijer: Metall. Mater. Trans. A, 2004, vol. 35, pp. 3387-98.
K.S. Jung, S.R. Meka, R.E. Schacherl, E. Bischoff, E.J. Mittemeijer: Metall. Mater. Trans. A, 2012, vol. 43, pp. 934–44.
Sergey A. Nikulin, Vladimir M. Khatkevich, Stanislav O. Rogachev, Kristina S. Denisenko: Metall. Mater. Trans. A, 2015, vol. 46, pp. 5864–70.
F. Bottoli, G. Winther, T.L. Christiansen, K.V. Dahl, and M.A.J. Somers: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4146–59.
P.K. Ajikumar, Ananthi Sankaran, M. Kamruddin, R. Nithya, P. Shankar, S. Dash, A.K. Tyagi, and B. Raj: Surf. Coat. Technol., 2006, vol. 201, pp. 102–07.
V.H. Baggio-Scheid, G. de Vasconcelos, M.A.S. Oliveira, and B.C. Ferreira: Surf. Coat. Technol., vol. 163–164, pp. 313–17.
A. Basu, J. Dutta Majumdar, S. Ghosh Chowdhury, P.K. Ajikumar, P. Shankar, A.K. Tyagi, Baldev Raj, I. Manna: Surf. Coat. Technol., 2007, vol. 201, pp. 6985–92.
H.L. Cao, C.P. Luo, J.W. Liu, C.L. Wu, G.F. Zou: Scr. Mater., 2008, vol. 58, pp. 786–789.
S.R. Levine, R.M. Caves: J. Electrochem. Soc., 1974, vol. 121, pp. 1051–64.
S.R. Ke, J. Wang, C.Y. Zhu, Z.D. Xiang: Mater. Chem. Phys., 2015, vol. 162, pp. 263-272.
Sophia A. Tsipas, Elena Gordo: Mater. Charact., 2016, vol. 118, pp. 494–504.
Z.D. Xiang, P.K. Datta: Surf. Coat. Technol., 2004, vol. 179, pp. 95–102.
Z.D. Xiang, S.R. Rose, P.K. Datta: Mater. Chem. Phys., 2003, vol. 80, pp. 482–489.
Min Qiao, Chungen Zhou: Corros. Sci., 2013, vol. 75, pp. 454-460.
Brian V. Cockeram: Surf. Coat. Technol, 1995, vol. 76-77, pp. 20-27.
Z. D. Xiang, J. S. Burnell-Gray, P. K. Datta: Surf. Eng., 2001, vol. 17, pp. 287-294.
H. Ichimura, Y. Ishii: Surf. Coat. Technol., 2001, vol. 145, pp. 94-100.
G. Bertrand, C. Savall, C. Meunier: Surf. Coat. Technol., 1997, vol. 96, pp. 323–329.
T. Hurkmans, D.B. Lewis, J.S. Brooks, and W.D. Münz: Surf. Coat. Technol., vol. 86–87, pp. 192–99.
This work is support by the State Key Laboratory of Refractories and Metallurgy, the Wuhan University of Science and Technology.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted August 25, 2016.
Rights and permissions
About this article
Cite this article
Lu, X.J., Xiang, Z.D. A Novel Single-Step Surface-Treatment Process for Forming Cr-Nitride Coatings on Steels. Metall Mater Trans A 48, 580–583 (2017). https://doi.org/10.1007/s11661-016-3873-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-016-3873-0