Abstract
Microstructural, tensile, and fracture characterizations of cylindrically forged forms of aluminum alloys AA7085-O and AA7175-T7452 were performed. Mechanical and fracture properties were investigated along radial, circumferential, and longitudinal directions to determine directional dependency. American Society for Testing and Materials (ASTM) test methods (ASTM E8-04 and ASTM E1820) were employed for both the tensile and fracture characterizations, respectively. The tensile and fracture properties were related to microstructure in each direction. The strength, elongation at break, and ultimate tensile strength of AA7085-O were higher than those of AA7175-T7452. AA7175-T7452 alloy failed in a brittle manner during fracture studies. AA7085-O outperformed AA7175-T7452 on fracture energy in all of the orientations studied. Smaller grain sizes on the planes normal to circumferential and longitudinal directions showed improvement in both elongation at break and fracture energy values compared to those of radial direction. Scanning electron microscopy images demonstrated cleavage fracture in AA7175-T7452 and transgranular fracture in AA7085-O.
Similar content being viewed by others
References
M. Hyatt, R. Caton, and D. Lovell: Proc. of AIAA:AHS:Aircraft Design, Systems and Operations. AIAA, 1989, vol. 89-2127, pp. 1–5.
E.A. Starke and Staley J.T. Prog. Aerospace. Sci. 1995, vol.32, pp. 131-172.
M. Nakai and Eto T. Mat. Sci. Eng. A, 2000, vol.285, pp. 62-68.
S. Abotula and Chalivendra V.B. J. Strain. Anal. Eng. 2010, vol. 45, pp. 555-565.
G.M. Ludtka and Laughlin D.E. Metall. Trans. A, 1982, vol. 13, pp. 411-425.
D. Dumont, A. Deschamps and Brechel Y. Mat. Sci. Eng. A, 2003, vol. 356, pp. 326-336.
G. Liu, J. Sun, C-W. Nan and Chen K-H. Acta. Mater. 2005, vol. 53, pp. 3459-3468.
A.A. Csontosa and Starkeb EA. Int. J. Plasticity. 2005, vol. 21, pp. 1097–1118.
M. Lalpoor, D.G. Eskin, Katgerman L. Mat. Sci. Eng. A, 2008, vol.497, pp. 186-194.
S-Y. Chen, K-H. Chen, L. Jia and Peng G-S. Trans. Nonferrous Met. Soc. China. 2013, vol. 23, pp. 329-334.
A.M. Samuel, H.W. Doty, S. Valtierra and Samuel F.H. Mat. Design, 2014, vol. 53, pp. 938-946.
F-G. Cong, G. Zhao, F. Jiang, N. Tian and Li R-F. Trans. Nonferrous Met. Soc. China. 2015, vol. 25, pp. 1027-1034.
K.O. Pedersena, I. Westermann, T. Furu, T. Børvika and Hopperstad O.S. Mat. Design. 2015, vol. 70, pp. 31-44.
E. Hornbogen and Graf M. Acta. Metall. 1977, vol. 25, pp. 877-881.
N.M. Han and Zhang X.M. J. Alloys. Compd. 2011, vol. 509, pp. 4138-4145.
T.S. Srivatsan, S. Vasudevan and Park L. Mat. Sci. Eng. A. 2007, vol. 466, pp. 235-245.
M. Lalpoor, D.G. Eskin, G.T. Brink and Katgerman L. Mat. Sci. Eng. A. 2010, vol. 527, pp. 1828-1834.
E.A. Starke, Jr., in: A.K. Vasudevan and R.D. Doherty, eds., Academic Press Inc., San Diego, 1989, vol. 31.
M. Dixit, R.S. Mishra and Sankaran K.K. Mat. Sci. Eng. A. 2008, vol.478, pp.163-172.
H.R. Shercliff and Ashby, M.F. Acta Metall. Mater. 1990, vol. 38, pp. 1789-1802.
E. Hall, Proc. Phys. Soc. Lond. 1951, vol. B64, pp. 747-753.
N.J. Petch, J. Iron. Steel. Inst. 1953, vol. 174, pp. 25-38.
P.M. Kelly, Scripta Metall. 1972, vol. 6, pp. 647-656.
R.H. Vanstone, R.H. Merchant, and J.R. Low: American Society for Testing and Materials, 1974, pp. 93–101.
T. Kobayashi, Mat. Sci. Eng. A. 2000, vol. 280, pp. 8-16.
B.F. Jogi, P.K. Brahmankar, V.S. Nanda, and R.C. Prasad: J. Mater. Process. Technol. 2008, vol. 201, pp. 380-384.
P. Das, R. Jayaganthan, T. Chowdhury and Singh, I.V. Mat. Sci. Eng. A. 2011, vol. 528, pp. 7124-7132.
E. Hornbogen, E.A. Starke, Jr., Acta. Metall. Mater. 1993, vol. 41, pp. 1-16.
G. Bo, Zuhan, L. Inter. Conf. Aluminum Alloys, International Academic Publishers, Beijing, China, 1990.
Acknowledgment
The authors acknowledge the financial support of the Associate Provost’s Office at the University of Massachusetts Dartmouth.
Author information
Authors and Affiliations
Corresponding author
Additional information
M.A. Rice and R.F. Doleski are employed by the Naval Undersea Warfare Center. U.S. Government work is not protected by U.S. Copyright.
Manuscript submitted November 21, 2015.
Rights and permissions
About this article
Cite this article
Benoit, S.G., Chalivendra, V.B., Rice, M.A. et al. Characterization of the Microstructure, Fracture, and Mechanical Properties of Aluminum Alloys 7085-O and 7175-T7452 Hollow Cylinder Extrusions. Metall Mater Trans A 47, 4476–4483 (2016). https://doi.org/10.1007/s11661-016-3624-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-016-3624-2