Abstract
The kinetics of the isothermal transformation, which occurs during a single-step quenching and partitioning (Q and P) process, was analyzed by means of dilatometry. Experiments revealed that an isothermal transformation with very specific characteristics occurred during the hold at the quenching temperature below the martensite start temperature. Although evidence for isothermal martensite transformation has been reported in the past for Fe-C alloys and steel, it is the first time that it is recognized to take place during the Q and P processing of low-carbon ferrous alloys.
Similar content being viewed by others
References
D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 25–34.
A.J. Clarke, J.G. Speer, M.K. Miller, R.E. Hackenberg, D.V. Edmonds, D.K. Matlock, F.C. Rizzo, K.D. Clarke, and E. De Moor: Acta Mater., 2008, vol. 56 (1), pp. 16–22.
J.G. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51 (9), pp. 2611–22.
D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7 (1), pp. 59–60.
S.J. Kim, H.S. Kim, and B.C. De Cooman: AIST Steel Properties and Applications Conference Proceedings, MS&T’07, Detroit, 2007, pp. 73–83.
S.V. Radcliffe and E.C. Rollason: J. Iron Steel Inst., 1959, vol. 191, pp. 56–65.
M. Oka and H. Okamoto: Metall. Trans. A, 1988, vol. 19A, pp. 447–52.
R.T. Howard and M. Cohen: Trans. AIME, 1948, vol. 176, pp. 384–400.
O. Schaaber: Trans. AIME, 1955, vol. 203, pp. 559–60.
J.W. Christian: The Theory of Transformations in Metals and Alloys, 2nd ed., Elsevier Science Ltd., New York, NY, 2001, p. 546.
B.L. Averbach and M. Cohen: Trans. ASM, 1949, vol. 41, pp. 1024–60.
S.R. Pati and M. Cohen: Acta Metall., 1969, vol. 17, pp. 189–99.
G.V. Kurdjumov and O.P. Maksimova: Dokl. Akad. Nauk. SSSR, 1948, vol. 61, pp. 83–93.
S.R. Pati and M. Cohen: Acta Metall., 1971, vol. 19, pp. 1327–32.
R.E. Cech and J.H. Hollomon: Trans. AIME, 1953, vol. 197, pp. 685–89.
S.M.C. van Bohemen, M.J. Santofimia, and J. Sietsma: Scripta Mater., 2008, vol. 58, pp. 488–91.
C.H. Shih, B.L. Averbach, and M. Cohen: Trans. AIME, 1955, vol. 203, pp. 183–87, and 1265–66.
T.Y. Hsu, Y. Chen, and W. Chen: Metall. Trans. A, 1987, vol. 18A, pp. 1531–32.
H.K.D.H. Bhadeshia: Bainite in Steels: Transformations, Microstructures and Properties, 2nd ed., IOM Communications Ltd., London, 2001, p. 73.
B.S. Lement and M. Cohen: Acta Metall., 1956, vol. 4 (5), pp. 469–76.
D. Z. Yang and C.M. Wayman: Acta Metall., 1984, vol. 32 (6), pp. 949–54.
G. Ghosh and V. Raghavan: Mater. Sci. Eng., 1986, vol. 80 (1), pp. 65–74.
N.N. Thadhani and M.A. Meyers: Acta Metall., 1986, vol. 34 (8), pp. 1625–41.
A. Borgenstam and M. Hillert: Acta Mater., 1997, vol. 45 (2), pp. 651–62.
T.Y. Hsu, X. Zuyao, and L. Xuemin: Scripta Metall., 1983, vol. 17 (11), pp. 1285–88.
C. Wells and R.F. Mehl: Trans. AIME, 1940, vol. 140, pp. 279–306.
B.V. Rao and G. Thomas: Proc. ICOMAT-79, Massachusetts Institute of Technology, Cambridge, MA, 1979, pp. 12–19.
G. Thomas and M. Sarikaya: Proc. Int. Conf. on Solid-Solid Phase Transformations, TMS-AIME, Warrendale, PA, 1982, pp. 999–1003.
J.M. Marder and A.R. Marder: Trans. ASM, 1969, vol. 62, pp. 1–10.
R.B.G. Yeo: Trans. ASM, 1964, vol. 57, pp. 48–61.
Acknowledgment
The authors gratefully acknowledge the support of POSCO (Pohang, South Korea) and ASPPRC (Colorado School of Mines, Golden, CO).
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted November 11, 2008.
Rights and permissions
About this article
Cite this article
Kim, D.H., Speer, J.G., Kim, H.S. et al. Observation of an Isothermal Transformation during Quenching and Partitioning Processing. Metall Mater Trans A 40, 2048–2060 (2009). https://doi.org/10.1007/s11661-009-9891-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-009-9891-4