Abstract
A shear band formation model during the cold rolling of Fe-3 Pct Si alloy is advanced. The model assumes a two-stage mechanism based on abnormal twinning according to the {114}〈221〉 system and secondary twinning in two standard {112}〈111〉 systems. As a result, the transformed shear band consists of nearly Goss orientated {11 11 1}〈1 1 22〉 and {111}〈112〉 being symmetrical to initially {111}〈112〉 orientated areas. This model provides an explanation for available experimental data.
Similar content being viewed by others
References
J.-T. Park, and J.A. Szpunar: Acta Mater., 2003, vol. 51, pp. 3037–51.
F. Cruz-Gandarilla, R. Penelle, H. Mendoza-Leon, T. Baudin, and G. Cabanas-Moreno: Mater. Sci. Forum, 2005, vols. 495–497, pp. 483–88.
S. Zaefferer: Mater. Sci. Forum, 2005, vols. 495–497, pp. 3–14.
K. Ushioda, and W.B. Hutchinson: ISIJ Int., 1989, vol. 29, pp. 862–67.
R. Shimizu, J. Harase, and D.J. Dingley: Acta Mater., 1990, vol. 38, pp. 973–78.
T. Kumano, T. Haratani, and Y. Ushigami: ISIJ Int., 2002, vol. 42, pp. 440–49.
H. Homma, and B. Hutchinson: Acta Mater., 2003, vol. 51, pp. 3795–805.
I.L. Dillamore, J.G. Roberts, and A.C. Bush: Mater. Sci., 1979, vol. 13, pp. 73–77.
D. Dorner, S. Zaefferer, and D. Raabe: Acta Mater., 2007, vol. 55, pp. 2519–30.
G.M. Rusakov, A.A. Redikultsev, and M.L. Lobanov: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2278–80.
V.S. Litvinov, and G.M. Rusakov: Phys. Met. Metallogr., 2000, vol. 90, suppl. 1, pp. 96–107.
S. Hartley: Phil. Mag., 1966, vol. 14 (132), pp. 1207–17.
Y. Maruhashi, A. Ozaygen, and M. Nishida: Mater. Sci. Forum, 2000, vols. 327–328, pp. 163–66.
A.N. Tyumentsev, N.S. Surikova, I.Y. Litovchenko, Y.P. Pinzhin, A.D. Korotaev, and O.V. Lysenko: Acta Mater., 2004, vol. 52, pp. 2067–74.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted December 6, 2008.
Rights and permissions
About this article
Cite this article
Rusakov, G.M., Lobanov, M.L., Redikultsev, A.A. et al. Model of {110}〈001〉 Texture Formation in Shear Bands during Cold Rolling of Fe-3 Pct Si Alloy. Metall Mater Trans A 40, 1023–1025 (2009). https://doi.org/10.1007/s11661-009-9791-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-009-9791-7