Abstract
Nickel-coated carbon fibers (NCFs) were fabricated by electroless plating. Sufficient activation sites were vital to deposit a continuous and uniform coating layer. The reaction mechanism and the effect of catalyzation time on the quality of the plating layer were especially discussed. The morphology and coating thickness of the NCFs, particle-size and phosphorus content in the coating layer, formation of the Ni3P phase, and its evolution with annealing temperature were examined by field emission scanning electron microscope (FESEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD).
Similar content being viewed by others
Notes
JEOL is a trademark of Japan Electron Optics Ltd., Tokyo.
References
S.J. Park, Y.S. Jang, J. Kawasaki: Carbon Lett., 2002, vol. 3, p. 77
C.Y. Huang, W.-W. Mo: Surf. Coat. Technol., 2002, vol. 154, p. 58
S.-S. Tzeng, F.-Y. Chang: Mater. Sci. Eng. A, 2001, vol. 302, p. 263
R.W. Murray: Acc. Chem. Res., 1980, vol. 13, p.135
Y. Murakami, Y. Hisada, T. Ozaki, and Y. Matsuda: J. Chem. Soc. Chem. Commun., 1989, p. 1094
P.V. Lakshminarayanan, H. Toghiani, C.U. Pittman Jr.: Carbon, 2004, vol. 42, p. 2433
Y.V. Basova, H. Hatori, Y. Yamada, K. Miyashita: Electrochem. Commun., 1999, vol. 1, p. 540
C.U. Pittman Jr., W. Jiang, G.-R. He, S.D. Gardnar: Carbon, 1998, vol. 36 (1–2), p. 25
A. Fjeldly, T. Olsen, J.H. Rysjedal, J.E. Berg: Compos. Part A, 2001, vol. 32, p. 373
T. Ramanathan, A. Bismarck, E. Schulz, K. Subramanian: Compos. Sci. Technol., 2001, vol. 61, p. 599
S.J. Park, B.J. Park: J. Mater. Sci. Lett., 1999, vol. 18, p. 47
J.P. Boudou, J.I. Paredes, A. Cuesta, A. Martínez-Alonso, J.M.D. Tascón: Carbon, 2003, vol. 41, p. 41
K.J. Hüttinger, W.P. Hoffman, G. Krekel: J. Mater. Sci., 1994, vol. 29, p. 2968
S. Chand: J. Mater. Sci., 2000, vol. 35, pp. 1303–13
J.P. Randin, H.E. Hintermann: Plating, 1967, vol. 54, p. 523
P.S. Kumar, P.K. Nair: J. Mater. Sci Lett., 1994, vol. 13, p. 671
T. Osaka, M. Usuda, I. Koiwa, H. Sawai: Jpn. J. Appl. Phys., 1998, vol. 27, p. 1885
K.-H. Hur, J.-H. Jeong, D.N. Lee: J. Mater. Sci., 1990, vol. 25, p. 2573
G.W. Marshall, D.B. Lewis, B.E. Dodds: Surf. Coat. Technol., 1992, vol. 53, p. 223
Q.X. Mai: Thin Solid Films, 1998, vol. 166, p. 235
H.G. Jiang, M. Rühle, E.J. Lavernia: J. Mater. Res., 1999, vol. 14, p. 549
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted March 25, 2007
Rights and permissions
About this article
Cite this article
Fan, Y., Yang, H., Zhu, H. et al. Metallization of Carbon Fibers with Nickel by Electroless Plating Technique. Metall Mater Trans A 38, 2148–2152 (2007). https://doi.org/10.1007/s11661-007-9278-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-007-9278-3