Abstract
The authors present new experimental data for shear punch tests and tensile tests using four different materials. The correlation between shear punch and tensile yield stresses must be established empirically, and the procedure for doing this is discussed. The elastic-plastic deformation in a shear punch test develops gradually with increasing punch displacement and is often assumed to be simple shear. This is examined using finite element analysis to simulate the development of plasticity during the early stages of punch displacement. The simulation results are used to rationalize the empirically established yield stress correlations.
Similar content being viewed by others
References
G.E. Lucas, G.R. Odette, and J.W. Sheckard: ASTM STP, 1986, vol. 888, pp. 112–39.
M.L. Hamilton, M.B. Toloczko, and G.E. Lucas: Recent Progress in Shear-Punch Testing, in: H. Ullmaier and P. Jung, eds., Forschungszentrum Julich GmbH, 1995, pp. 46–51.
G.L. Hankin, M.B. Toloczko, K.I. Jhonson, M.A. Khaleel, M.L. Hamilton, F.A. Garner, R.W. Davies, and R.J. Faulkner: ASTM STP, 2000, vol. 1366, pp. 1018–28.
M.B. Toloczko, M.L. Hamilton, and G.E. Lucas: J. Nucl. Mater., 2000, vol. 283–287, pp. 987–91.
G.L. Hankin, M.B. Toloczko, M.L. Hamilton, F.A. Garner, and R.G. Faulkner: J. Nucl. Mater., 1998, vol. 258–263, pp. 1657–63.
R. Nomoto, T.E. Carrick, and F.J. McCabe: Dent. Mater., 2001, vol. 17, pp. 415–21.
S.M. Kurtz, C.W. Jewett, J.S. Bergstrom, J.R. Foulds, and A.A. Edidin: Biomaterials, 2002, vol. 23, pp. 1907–19.
C.A. Leo’n and R.A.L. Drew: Mater. Lett., 2002, vol. 56, pp. 812–16.
R.K. Guduru, K.A. Darling, R. Kishore, R.O. Scattergood, C.C. Koch, and K.L. Murty: Ultrafine Grained Mater. III, TMS, 2004, pp. 565–70.
R.K. Guduru, K.A. Darling, R. Kishore, R.O. Scattergood, C.C. Koch, and K.L. Murty: Mater. Sci. Eng. A, 2005, vol. 395, pp. 307–14.
G.L. Hankin, M.B. Toloczko, M.L. Hamilton, and R.G. Faulkner: J. Nucl. Mater., 1998, vol. 258–263, pp. 1651–56.
M.B. Toloczko, R.J. Kurtz, A. Hasegawa, and K. Abe: J. Nucl. Mater., 2002, vol. 307–311, pp. 1619–23.
M.L. Hamilton and M.B. Toloczko: J. Nucl. Mater., 2000, vol. 283–287, pp. 488–91.
M.B. Toloczko, Y. Yokokura, K. Abe, M.L. Hamilton, F.A. Garner, and R.J. Kurtz: ASTM STP, 2002, vol. 1418, pp. 339–49.
H. Ford and J. Alexander: Advanced Mechanics of Materials, 2nd ed., Wiley, 1977, p. 439.
G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill Inc., New York, 1986, pp. 76–82.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Guduru, R.K., Scattergood, R.O., Koch, C.C. et al. Finite element analysis of a shear punch test. Metall Mater Trans A 37, 1477–1483 (2006). https://doi.org/10.1007/s11661-006-0092-0
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-006-0092-0