Abstract
The microstructural changes during mechanical alloysing and subsequent hot pressing of Cu, Ti, and B powder mixtures were studied using scanning electron microscopy, X-ray diffraction, differential thermal analysis, and electron microprobe analysis. In particular, the changes in the Cu grain size, lattice parameter, and lattice strain of the powder mixtures and the formation of new phases (TiCu4 during mechanical alloying and TiB2 during hot pressing) were investigated. The mechanism of the in-situ formation of TiB2 particles in the resultant copper composite was also studied.
Similar content being viewed by others
References
A. Chrysanthou and G. Erbaccio: J. Mater. Sci., 1995, vol. 30, pp. 6339–44.
C. Biselli, D.G. Morris, and N. Randall: Scripta Metall. Mater., 1994, vol. 30, pp. 1327–32.
Z.Y. Ma and S.C. Tjong: Mater. Sci. Eng. A, 2000, vol. 284A, pp. 70–76.
J. Lee, J.Y. Jung, E.-S. Lee, W.J. Park S. Ann, and N.J. Kim: Mater. Sci. Eng. A, 2000, vol. 277A, pp. 274–83.
E. Yuasa, T. Morooka, R. Laag, W.A. Kaysser, and G. Petzow: Powder Metall., 1992, vol. 35, pp. 120–24.
S.C. Tjong and Z.Y. Ma: Mater. Sci. Eng. Rep., 2000, vol. 29, pp. 49–113.
J.A. Rodriguez, J.M. Gallardo, and E.J. Herrera: J. Mater. Sci., 1997, vol. 32, pp. 3535–39.
L. Lu and M.O. Lai: Mechanical Alloying, Kluwer Academic Publishers, London, 1998, pp. 23–64.
J. Eckert, J.C. Holzer, C.E. Krill III, and W.L. Johnson: J. Appl. Phys., 1993, vol. 73, pp. 2794–2802.
B.C. Giessen and D. Szymanski: J. Appl. Cryst., 1971, vol. 4, pp. 257–59.
N. Karlsson: J. Inst. Met., 1951, vol. 79, pp. 391–405.
A.E.W. Jarfors: J. Mater. Sci., 1999, vol. 34, pp. 4533–44.
T.H. Dekeijser, J.I. Langford, E.J. Mittemeijer, and A.B.P. Vogels: J. Appl. Cryst., 1982, vol. 15, pp. 308–14.
D.R. Askeland: The Science and Engineering of Materials. 3rd edition, PWS Publishing Company, Boston, MA, 1994, pp. 67–70.
J. Eckert, J.C. Holzer, C.E. Krill, III, and W.L. Johnson: J. Mater. Res., 1992, vol. 7, pp. 1751–61.
S. Nagarjuna and D.S. Sarma: Scripta Mater., 1999, vol. 41, pp. 359–63.
R.W. Cahn and P. Haasen: Physical Metallurgy, 3rd revised and enlarged edition, North-Holland Physics Publishing, New York, NY, 1983, Part II, pp. 1341–1409.
T.B. Massalski: Binary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 474, 547, 1494.
A. Corrias, G. Ennas, G. Marongiu, A. Muainu, and G. Paschina: J. Mater. Res., 1993, vol. 8, pp. 1327–33.
J.B. Holt, D.D. Kingman, and G.M. Bianchini: Mater. Sci. Eng., 1985, vol. 71, pp. 321–27.
D. Bozie and M. Mitkov: Mater. Sci. Technol., 1992, vol. 8, pp. 1108–15.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dong, S.J., Zhou, Y., Chang, B.H. et al. Formation of a TiB2-reinforced copper-based composite by mechanical alloying and hot pressing. Metall Mater Trans A 33, 1275–1280 (2002). https://doi.org/10.1007/s11661-002-0228-9
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-002-0228-9