Abstract
A careful investigation of the Sn-Ag-Cu phase diagram near the ternary eutectic composition was undertaken using annealed alloys and differential scanning calorimetry to settle some uncertainties in the eutectic composition. The eutectic composition was found to be 3.5 wt pct Ag, 0.9 wt pct Cu, and the balance Sn. The published eutectic temperature, 217 °C, was confirmed. A value of 217.2 °C was obtained in the present research.
Similar content being viewed by others
References
C.M. Miller, I.E. Anderson, and J.F. Smith: J. Electronic Mater., 1994, vol. 23, pp. 595–601.
I.E. Anderson, R.L. Terpstra, and O. Unal: Ames Laboratory, Ames, IA, research presented at Reliability of Solders and Solder Joints Symp., 1997 TMS Annual Meeting, Orlando, FL, Feb. 11, 1997.
W. Kurz and D.J. Fisher: Fundamentals of Solidification, 3rd ed., Trans Tech Publications Ltd., Aedermannsdorf, Switzerland, 1992, p. 110.
M. McCormack, S. Jin, G.W. Kammlott, and H.S. Chen: Appl. Phys. Lett., 1993, vol. 63, pp. 15–17.
M.E. Loomans: Northwestern University, Evanston, IL, unpublished research, 1997.
W.B. Pearson: Handbok of Lattice Spacings and Structure of Metals, Pergamon Press, Oxford, United Kingdom, 1967, vol. 2.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Loomans, M.E., Fine, M.E. Tin-silver-copper eutectic temperature and composition. Metall Mater Trans A 31, 1155–1162 (2000). https://doi.org/10.1007/s11661-000-0111-5
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-000-0111-5