Skip to main content
Log in

Use of clay as a pozzolona in high strength Portland cement and its thermal activation

  • Published:
Chinese Journal of Geochemistry Aims and scope Submit manuscript

Abstract

In this investigation local clay from Cherat mines, Nowshera District, NWFP, Pakistan, has been tested as a pozzolanic material in high strength Portland cement. Thermal treatments were performed as a means of activation of the clay. It was found that thermal treatment of the clay can increase its pozzolanic activity. Different blended mortars, containing different amounts of clay, activated at different temperatures were studied for compressive strength, consistency, and setting times. It was concluded that the mechanical properties of the blended cements were mainly governed by the percentage of incorporation of the calcined clay. Blended cement composition has been formulated, with optimal results of 20% calcined clay at a temperature of 600°C.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Ali K., Amin N., and Shah M.T. (2008) Chemical study of limestone and clay for cement manufacturing in Darukhula Nizampur, District Nowshera, N.W.F.P., Pakistan [J]. Chinese Journal of Geochemistry. 27, 242–248.

    Article  Google Scholar 

  • Al-Rawas A., Hago A.W., Corcoran T.C., and Al-Ghafri K.M. (1999) Properties of Omani artificial pozzolana [J]. Appl. Clay Sci. 13, 275–292.

    Article  Google Scholar 

  • Amin N., Shah M.T., and Ali K. (2009) Raw mix designing, clinkerization and manufacturing of high strength Portland cement from the lime stone and clay of Darukhula Nizampur, District Nowshera, N.W.F.P., Pakistan [J]. Chinese Journal of Geochemistry. 28, 279–283.

    Article  Google Scholar 

  • Bai J., Wild S., Sabir B.B., and Kinuthia J.M. (1999) Workability of concrete incorporating PFA and metakaolin [J]. Mag. Concr. Res. 12, 207–216.

    Article  Google Scholar 

  • Barger G.S., Hansen E.R., Wood M.R., Neary T., Beech D.J., and Jaquier D. (2001) Production and use of calcined natural pozzolans in concrete [J]. Cem. Concr. Aggregat. 23, 73–80.

    Article  Google Scholar 

  • Caldarone M.A., Gruber K.A., and Burg R.G. (1994) High reactivity metakaolin: A new generation mineral admixture [J]. Concr. Int (November). 37–40.

  • Chakchouk A., Samet B., and Mnif T. (2006) Study on the potential use of Tunisian clay as pozzolanic material [J]. Appl. Clay Sci. 33, 79–88.

    Article  Google Scholar 

  • Coleman N.S. and Page C.L. (1997) Aspect of the pore solution chemistry of hydrated cement pastes containing metakaolin [J]. Cem. Concr. Res. 27, 147–154.

    Article  Google Scholar 

  • Forrester J.A. (1975) Burnt clay, pozzolanas. In Proceedings of the Meeting on Small Scale Manufacture of Cement Materials [M]. pp.53–59. Intermediate Technology Publication, London.

    Google Scholar 

  • He C., Osbaeck B., and Makovicky E. (1995) Pozzolanic reactions of six principle clay minerals: Activation, reactivity assessments and technological effects [J]. Cem. Concr. Res. 25, 1691–1702.

    Article  Google Scholar 

  • Malhotra V.M. (1992) The use of fly ash, slag, silica fume and rice-husk ash in concrete: a review. In CBUL CANMET, International Symposium on Use of Fly Ash, Silica Fume, Slag and Other by Products in Concrete and Construction Materials [M]. pp.1–34. Milwaukee, Wisconsin.

    Google Scholar 

  • Ramachandran V.S. (1995) Concrete Admixtures Handbook, Properties, Science and Technology (2nd ed) [M]. pp.60–65. Noyes Publications, New Jersey, USA.

    Google Scholar 

  • Saad Morsy M., Abo El Enein S.A., and Hanna G.B. (1997) Microstructure and hydration characteristics of artificial pozzolana-cement pastes containing burnt kaolinite clay [J]. Cem. Concr. Res. 27, 1307–1312.

    Article  Google Scholar 

  • Sabir B.B., Wild S., and Bai J. (2001) Metakaolin and calcined clays as pozzolona for concrete: A review [J]. Cem. Concr. Comp. 23, 441–454.

    Article  Google Scholar 

  • Samet B. and Chaabouni M. (2004) Characterisation of the Tunisian Blastfurnace slag and its application in the formulation of cement [J]. Cem. Concr. Res. 34, 1153–1159.

    Article  Google Scholar 

  • West J., Atkinson C., and Howard N. (1994) Embodied energy and carbon dioxide emissions for building materials. In Proceedings of the 1st International Conference ‘Buildings and Environment’ CIB Task Group 8, Section 5, Paper 2 [M]. pp.110–116. Build. Res. Establishment, Watford, UK.

    Google Scholar 

  • Wild S., Khatib J.M., and Jones A. (1996) Relative strength, pozzolanic activity and cement hydration in superplasticised metakaolin concrete [J]. Cem. Concr. Res. 26, 1537–1544.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Noor-ul-Amin.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Noor-ul-Amin Use of clay as a pozzolona in high strength Portland cement and its thermal activation. Chin. J. Geochem. 29, 143–145 (2010). https://doi.org/10.1007/s11631-010-0143-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11631-010-0143-5

Key words

Navigation