Skip to main content
Log in

Unsteady behavior of leading-edge vortex and diffuser stall in a centrifugal compressor with vaned diffuser

  • Published:
Journal of Thermal Science Aims and scope Submit manuscript

Abstract

The characteristics of a rotating stall of an impeller and diffuser and the evolution of a vortex generated at the diffuser leading-edge (i.e., the leading-edge vortex (LEV)) in a centrifugal compressor were investigated by experiments and numerical analysis. The results of the experiments revealed that both the impeller and diffuser rotating stalls occurred at 55 and 25 Hz during off-design flow operation. For both, stall cells existed only on the shroud side of the flow passages, which is very close to the source location of the LEV. According to the CFD results, the LEV is made up of multiple vortices. The LEV is a combination of a separated vortex near the leading- edge and a longitudinal vortex generated by the extended tip-leakage flow from the impeller. Therefore, the LEV is generated by the accumulation of vorticity caused by the velocity gradient of the impeller discharge flow. In partial-flow operation, the spanwise extent and the position of the LEV origin are temporarily transmuted. The LEV develops with a drop in the velocity in the diffuser passage and forms a significant blockage within the diffuser passage. Therefore, the LEV may be regarded as being one of the causes of a diffuser stall in a centrifugal compressor.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Senoo, Y., Kinoshita, Y., and Ishida, M., (1977), Asymmetric Flow in Vaneless Diffusers of Centrifugal Blowers, ASME Journal of Fluids Engineering, Vol. 99, pp. 104–114.

    Article  Google Scholar 

  2. Senoo, Y., and Kinoshita, Y., (1978), Limits of Rotating Stall and Stall in Vaneless Diffuser of Centrifugal Compressors, ASME Paper No.78-GT-19, London, England.

    Book  Google Scholar 

  3. Haupt, U., Seidel, U., Abdel-Hamid, A. N., and Rautenberg, M., (1988), Unsteady Flow in a Centrifugal Compressor with Different Types of Vaned Diffusers, ASME Journal of Turbomachinery, vol. 110, pp. 293–303.

    Article  ADS  Google Scholar 

  4. Iwakiri, K., Furukawa, M., Ibaraki, S., and Tomita, I., (2009), Unsteady and Three-Dimensional Flow Phenomena in a Transonic Centrifugal Compressor Impeller at Rotating Stall, Proceedings of ASME Turbo Expo 2009, Orlando, USA, GT2009-59516.

    Google Scholar 

  5. Spakovsky, Z. S. and Roduner, C. H., (2007), Spike and Modal Stall Inception in an Advanced Turbocharger Centrifugal Compressor, Proceedings of ASME Turbo Expo 2007, Montreal, Canada, GT2007-27634.

    Google Scholar 

  6. Ohta, Y., Goto, T., and Outa, E., (2010), Unsteady Behavior and Control of Diffuser Leading-edge Vortex in a Centrifugal Compressor, Proceedings of ASME Turbo Expo 2010, Glasgow, UK,GT2010-22394.

    Google Scholar 

  7. Fujisawa, N., Hara, S., and Ohta, Y., (2014), Unsteady Behavior of Leading-edge Vortex and Diffuser Stall Inception in a Centrifugal Compressor with Vaned Diffuser, Proceedings of ASME FEDSM 2014, Chicago, USA, FEDSM2014-21242.

    Google Scholar 

  8. Steger, J. L., and Warming, R. F., (1981), Flux Vector Splitting of the Inviscid Gasdynamic Equations with Application to Finite-Difference Methods, Journal of Computational Physics, Vol. 40, pp. 263–293.

    Article  ADS  MATH  MathSciNet  Google Scholar 

  9. van Leer, B., (1979), Towards the Ultimate Conservative Difference Scheme V: A Second-Order Sequel to Godunov’s Method, Journal of Computational Physics, Vol. 32, pp. 101–136

    Article  ADS  Google Scholar 

  10. Shima, E., (1997), “A simple implicit scheme for structured/unstructured cfd”, Proceedings of 29th Fluid Dynamic Conference, Hokkaido, Japan, pp. 325–328. (in Japanese)

    Google Scholar 

  11. Spalart, P. R., Jou, M.-H., Strelets, M., and Allmaras, S. R., (1997), Comments on the Feasibility of LES for Wings and on the Hybrid RANS/LES Approach, Advances in DNS/LES, Proceedings of the First AFOSR International Conference on DNS/LES, Columbus, USA.

    Google Scholar 

  12. Strelets, M., (2001), Detached Eddy Simulation of Massively Separated Flows, AIAA Paper, 2001-0879, Reno, USA.

    Book  Google Scholar 

  13. Thompson, K. W., (1987), Time Dependent Boundary Conditions for Hyperbolic Systems, Journal of Computational Physics, Vol. 68, pp. 1–24.

    Article  ADS  MATH  MathSciNet  Google Scholar 

  14. Steger, J. L., Dougherty, F. C., and Benek, J. A., (1983), A Chimera Grid Schemes, ASME FED-vol. 5.

    Google Scholar 

  15. Ohta, Y., Takehara, N., Okutsu, Y., and Outa, E., (2005), Effects of Diffuser Vane Geometry on Interaction Noise Generated from a Centrifugal Compressor, Journal of Thermal Science, Vol. 14, No. 4, pp. 321–328.

    Article  ADS  Google Scholar 

  16. Goto, T., Ohta, Y., and Outa, E., (2007), Improvement of Aerodynamic Performance and Noise Reduction of Centrifugal Compressor with Tapered Diffuser Vanes, Proceedings of the International Gas Turbine Congress 2007, Tokyo, Japan, TS-033 (CD-ROM).

    Google Scholar 

  17. Jeong, J. and Hussain, F., (1995), On the Identification of a Vortex, Journal of Fluid Mechanics, Vol. 285, pp. 69–94

    Article  ADS  MATH  MathSciNet  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Fujisawa, N., Hara, S. & Ohta, Y. Unsteady behavior of leading-edge vortex and diffuser stall in a centrifugal compressor with vaned diffuser. J. Therm. Sci. 25, 13–21 (2016). https://doi.org/10.1007/s11630-016-0829-z

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11630-016-0829-z

Keywords

Navigation