Abstract
Microwave boriding layer microstructure of carbon steels and its diffusion mechanics were studied. The results show that the existence of microwave field in the boriding can’t change the growth mechanics of boriding layer. Compared with conventional boriding, if the treatment temperature and time remain constantly, the descend rate of the boriding layer thickness with the increase of carbon content of steel is smaller. The diffusion activation energy of T8 steel is 2.6×105 J/mol between the temperature of 750 °C and 900 °C in microwave field, which is in the same order of conventional boriding.
Similar content being viewed by others
References
D Stein, K V Klitizing. Microwave Processing-an Emerging Industry Technology[J]. Mat. Res. Soc. Symp. Proc. 1994:347
D R Baghurst, A M Chippindale, D M P Mingos. Microwave Syntheses for Super-conducting Ceramics[J]. Nature.332(24), 311(1988)
B Swain. Microwave Sintering of Ceramics[J]. Met Prog, 134(3), 76–82(1988)
Qiaoxin zhang, Jianhong zhang, Yufu Wang. Preparation of Surface Boronization Layer in Microwave Field[J]. Transaction of Wuhan University of Technology. 2006, 28(4):8–10(in Chinese)
Guozuo Wang, Wanzhi Wang. Chemical Heat Treatment of Steel[M]. China Railway Press, Beijing. 1980:292–293
Lianmeng Zhang, Xuehui Huang. Foundation of Material Science[M]. Wuhan University of Technology Press. 2004, 8:407
Kun Yu. Boriding of Steel and Cast Iron[M]. National Defence Industry Press. 1984, 11:16–18(in Chinese)
Hager H J, Trute G. Boronizing to Produce Wear-resistant Surface Layers[J]. Heat Treatment of Metals, 1994(2):31–39
Tiren Gu, Ma Jiming, Li Wailang. Surface Chemistry[M]. Science Press, Beijing. 2003, 7:199
J H Booske, R F Cooper, I Dobson. Mechanisms for Nonthermal Effects on Ionic Mobility during Microwave Processing of Crystalline Solids[J]. J. Mater. RES, 1992, 7(2):495–500
Wuhan Material Protection Research Institute of the Ministry of the First Machine Building Industry. Metallographical Spectrum of Chemistry Heat Treatment in Steel[M]. Machine Press. 1980, 10:53–54
Mingxun Cui, Pin Zhao. Influence of Cold Flowing for Diffusion Activation Energy of Ni in 38CrMoAlA Steel[J]. Transaction of Metal Heat Treatment.1994(1):50
Karlsson L, Norden H. Non-equilibrium Grain Boundany Segregation of Boron in Austenitic Stainless Steel[J]. Acta Metall, 1988, 36:35
Author information
Authors and Affiliations
Corresponding author
Additional information
Funded by the National Natural Science Foundation of China (No.50371064) and Natural Science Foundation of Hubei (No.2003ABA032)
Rights and permissions
About this article
Cite this article
Ye, W., Huang, Z., Zhang, Q. et al. Microstructure and of mechanics microwave boriding. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 23, 528–531 (2008). https://doi.org/10.1007/s11595-006-4528-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-006-4528-6