Abstract
The study of cylindrical particulate internal flows has wide industrial applicability hence received much attention. This article reviews the cylindrical particulate internal flows over the past twenty years. The research is related to the cylindrical particulate flows in the straight channel, curved channel and rotational channel. Finally, several open research issues have been identified.
Similar content being viewed by others
References
Altan M C, Guceri S I, Pipes R B. Anisotropic channel flow of fiber suspensions. Journal of Non-Newtonian Fluid Mechanics, 1992, 42(1,2): 65–83
Oosthuizen P H, Chen S, Kuhn D C S. Fluid and fiber flow near a wall slot in a channel. Pulp & Paper-Canada, 1994, 95(5): 27–30
Tang L, Altan M C. Entry flow of fiber suspensions in a straight channel. Journal of Non-Newtonian Fluid Mechanics, 1995, 56(2): 183–216
Develter P G, Duffy G G. Flow of wood pulp fiber suspensions in open channels. Appita Journal, 1998, 51(5): 356–362
Chiba K, Yasuda K, Nakamura K. Numerical solution of fiber suspension flow through a parallel plate channel by coupling flow field with fiber orientation distribution. Journal of Non-Newtonian Fluid Mechanics, 2001, 99(2,3): 145–157
Lin J Z, Li J, Zhang W F. Orientation distribution of fibers in a channel flow of fiber suspension. Chinese Physics, 2005, 14(12): 2529–2538
Park J, Butler J E. Inhomogeneous distribution of a rigid fiber undergoing rectilinear flow between parallel walls at high Peclet numbers. Journal of Fluid Mechanics, 2009, 630: 267–298
Krochak P J, Olson J A, Martinez D M. Near-wall estimates of the concentration and orientation distribution of a semi-dilute rigid fiber suspension in Poiseuille flow. Journal of Fluid Mechanics, 2010, 653: 431–462
Manhart M. Rheology of suspensions of rigid-rod like particles in turbulent channel flow. Journal of Non-Newtonian Fluid Mechanics, 2003, 112(2,3): 269–293
Xu H J, Aidun C K. Characteristics of fiber suspension flow in a rectangular channel. International Journal of Multiphase Flow, 2005, 31(3): 318–336
Lin J Z, Gao Z Y, Zhou K, Chan T L. Mathematical modeling of turbulent fiber suspension and successive iteration solution in the channel flow. Applied Mathematical Modelling, 2006, 30(9): 1010–1020
Zhang H F, Ahmadi G, Asgharian B. Transport and deposition of angular fibers in turbulent channel flows. Aerosol Science and Technology, 2007, 41(5): 529–548
Gillissen J J J, Boersma B J, Mortensen P H, Andersson H I. The stress generated by non-Brownian fibers in turbulent channel flow simulations. Physics of Fluids, 2007, 19(11): 115107
Lin J Z, Shen S H. A theoretical model of turbulent fiber suspension and its application to the channel flow. Science China-Physics Mechanics & Astronomy, 2010, 53(9): 1659–1670
Sykes P, Rallison J M. Lubrication theory for a fiber suspension: Part 1, pressure-driven flow in a planar channel having slowly-varying cross-section. Journal of Non-Newtonian Fluid Mechanics, 1997, 71(1,2): 109–136
Lin J Z, Zhang L X, Wang Y L. Research on the distribution function and orientation tensors of fiber suspensions in wedge-shaped flow field. Journal of Hydrodynamics. Ser. B, 2002, 14(1): 38–44
Krochak P J, Olson J A, Martinez D M. The orientation of semidilute rigid fiber suspensions in a linearly contracting channel. Physics of Fluids, 2008, 20(7): 073303
Krochak P J, Olson J A, Martinez D M. Fiber suspension flow in a tapered channel: The effect of flow/fiber coupling. International Journal of Multiphase Flow, 2009, 35(7): 676–688
Olson J A, Frigaard I, Chan C, Hämäläinen J P. Modeling a turbulent fibre suspension flowing in a planar contraction: The one-dimensional headbox. International Journal of Multiphase Flow, 2004, 30(1): 51–66
Parsheh M, Brown ML, Aidun C K. On the orientation of stiff fibres suspended in turbulent flow in a planar contraction. Journal of Fluid Mechanics, 2005, 545(1): 245–269
Parsheh M, Brown M L, Aidun C K. Investigation of closure approximations for fiber orientation distribution in contracting turbulent flow. Journal of Non-Newtonian Fluid Mechanics, 2006, 136(1): 38–49
Parsheh M, Brown M L, Aidun C K. Variation of fiber orientation in turbulent flow inside a planar contraction with different shapes. International Journal of Multiphase Flow, 2006, 32(12): 1354–1369
Lin J Z, Zhang S L, Olson J A. Effect of fibers on the flow property of turbulent fiber suspensions in a contraction. Fibers and Polymers, 2007, 8(1): 60–65
Hyensjo M, Dahlkild A. Study of the rotational diffusivity coefficient of fibers in planar contracting flows with varying turbulence levels. International Journal of Multiphase Flow, 2008, 34(9): 894–903
Townsend P, Walters K. Expansion flows of non-newtonian liquids. Chemical Engineering Science, 1994, 49(5): 748–763
Baloch A, Webster M F. A Computer-simulation of complex flows of fiber suspensions. Computers & Fluids, 1995, 24(2): 135–151
Verweyst B E, Tucker C L III. Fiber suspensions in complex geometries: Flow/orientation coupling. Canadian Journal of Chemical Engineering, 2002, 80(6): 1093–1106
Lu Z M, Khoo B C, Dou H S, Phan-Thien N, Seng Yeo K. Numerical simulation of fiber suspension flow through an axisymmetric contraction and expansion passages by Brownian configuration field method. Chemical Engineering Science, 2006, 61(15): 4998–5009
Ku X K, Lin J Z. Fiber orientation distributions in slit channel flows with abrupt expansion for fiber suspensions. Journal of Hydrodynamics, 2008, 20(6): 696–705
Nsom B. Stability of fiber suspension flow in curved channel. Journal de Physique. II, 1996, 6(10): 1483–1492
Chinesta F, Chaidron G. Short fibers suspension in steady recirculating flows. Canadian Journal of Chemical Engineering, 2002, 80(3): 355–362
Chinesta F, Chaidron G, Poitou A. On the solution of Fokker-Planck equations in steady recirculating flows involving short fiber suspensions. Journal of Non-Newtonian Fluid Mechanics, 2003, 113(2,3): 97–125
Chiba K, Ammar A, Chinesta F. On the fiber orientation in steady recirculating flows involving short fibers suspensions. Rheologica Acta, 2005, 44(4): 406–417
Wan Z H, Lin J Z, You Z J. The effects of closure model of fiber orientation tensor on the instability of fiber suspensions in the Taylor-Couette flow. Modern Physics Letters B, 2007, 21(24): 1611–1625
Zhang Q H, Lin J Z, Wang C X. Orientation distribution of fibers immersed in a curved expansion duct. International Journal of Nonlinear Sciences and Numerical Simulation, 2009, 10(11,12): 1585–1594
Lin J Z, Zhang Q H, Zhang K. Rheological properties of fiber suspensions flowing through a curved expansion duct. Polymer Engineering and Science, 2010, 50(10): 1994–2003
Bennington C P J, Kerekes R J, Grace J R. Motion of pulp fiber suspensions in rotary devices. Canadian Journal of Chemical Engineering, 1991, 69(1): 251–258
Wang J, Silva C A, Viana J C, van Hattum F W J, Cunha A M, Tucker C L. Prediction of fiber orientation in a rotating compressing and expanding mold. Polymer Engineering and Science, 2008, 48(7): 1405–1413
Zhang Q H, Li Y X, Lin J Z. Numerical simulation of cylinder orientation through a rotating straight expansion duct. Journal of Drainage and Irrigation Machinery Engineering, 2010, 5: 422–427
Zhang Q H, Lin J Z. Orientation distribution and rheological properties of fiber suspensions flowing through curved expansion and rotating ducts. Journal of Hydrodynamics. Ser. B, 2010, 22(5): 920–925
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Huang, L., Gao, X. & Lin, J. Cylindrical particulate internal flows: A review. Front. Mech. Eng. 7, 385–393 (2012). https://doi.org/10.1007/s11465-012-0354-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11465-012-0354-z