Skip to main content
Log in

Preparation of polyvinylpyrrodione microspheres by dispersion polymerization

  • Research Article
  • Published:
Frontiers of Chemistry in China

Abstract

The preparation of polyvinylpyrrolidone (PVP) microspheres in ethyl acetate by dispersion polymerization with N-vinylpyrrolidone (NVP) as initial monomer, poly(N-vinylpyrrolidone-co-vinyl acetate) (P (NVP-co-VAc)) as dispersant, and 2, 2′-azobisisobutyronitrile(AIBN) as initiator is reported. The influences of monomer concentration, dispersant concentration and initiator concentration on the size of PVP microspheres as well as the monomer conversion were studied. The structure and properties of PVP microspheres were analyzed. The results show that the prepared PVP microspheres have a mean diameter of 3-4 μm. With an increase in NVP concentration, the size and the molecular weight of the PVP microspheres as well as the monomer conversion all increase. With increasing P(NVP-co-VAc) concentrations, the PVP molecular weight and monomer conversion both increase while the size of the microspheres becomes smaller. As the concentration of AIBN increases, the microsphere size and monomer conversion increase whereas the PVP molecular weight decreases. The PVP prepared by dispersion polymerization has a crystal structure, and its molecular weight is lower compared to that prepared by solution polymerization.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Haaf F, Sanner A, Straub F. Polymer on N-vinylpyrrolidone: synthesis, characterization and uses. Polymer Journal, 1984, 17(1): 143–152

    Article  Google Scholar 

  2. Yan Ruixuan. Water-Soluble Polymers. Beijing: Chemical Industry Press, 1998, 586–689

    Google Scholar 

  3. Cui Y D, Yi G B, Liao LW, Kang Z. Radical polymerization of N-vinlpyrrolidone in solution. Journal of Chemical Industry Engineering, 2000, 51(3): 369–371 (in Chinese)

    Google Scholar 

  4. Senogles E, Thomas R A. Hydrogen bonding effects in the polymerization of N-vinylpyrrolidone. Journal of Polymer Science, Polymer Letters Edition, 1978, 16(11): 555–562

    Article  CAS  Google Scholar 

  5. Panarin E F, Ushakova V N, Leiukh A I, Kirukhin D P, Munikhes V M. Radiation-induced polymerization of N-vinylpyrrolidone in bulk, in aqueous and alcohol solution. Radiation Physics and Chemistry, 1994, 43(5): 509–513

    Article  CAS  Google Scholar 

  6. Cui Y D, Yi G B, Liao L W. Synthesis and Application of Polyvinylpyrrolidone. Beijing: Science Press, 2001, 120–207

    Google Scholar 

  7. Pojman J A, Gunn G, Patterson C, Owens J, Simmons C. Frontal dispersion polymerization. Journal of Physical Chemistry B, 1998, 102(20): 3927–3929

    Article  CAS  Google Scholar 

  8. Lee J, Ha J U, Choe S, Lee C S, Shim S E. Synthesis of highly monodisperse polystyrene microspheres via dispersion polymerization using an amphoteric initiator. Journal of Colloid and Interface Science, 2006, 298: 663–671

    Article  CAS  Google Scholar 

  9. Wang W, Liu L Y, Huang Z H, Yang W T. Study on photoinitiated dispersion polymerization of acrylamide by using poly(acrylic acid)-graft-nonylphenoxypoly- (ethylene oxide) as the dispersant. Acta Polymerica Sinica, 2005, (3): 320–326 (in Chinese)

  10. Zhang H T, Yuan X Y, Huan J X. Study of kinetics and nucleation mechanism of dispersion copolymerization of methyl methacrylate and acrylic acid. Reactive & Functional Polymers, 2004, 59: 23–31

    Article  CAS  Google Scholar 

  11. Lacroix-Desmazes P, Guillot J. Dispersion polymerization of styrene in ethanol-water media: monomer partitioning behavior and locus of polymerization. Journal of Polymer Science, Part B: Polymer Physics, 1998, 36(2): 325–335

    Article  CAS  Google Scholar 

  12. Murray P G, Ramesh M. Water soluble polymers produced by homogeneous dispersion polymerization. ACS Symposium Series, 2000, 755: 36–45

    Article  CAS  Google Scholar 

  13. Macková H, Horák D. Effects of the reaction parameter on properties of thermosensitive poly(N-isopropylacrylamide) microspheres prepared by precipitation and dispersion polymerization. Journal of Polymer Science: Part A: Polymer Chemistry, 2006, 44: 968–982

    Article  CAS  Google Scholar 

  14. Ye Q, Zhang X F, Ge X W, Zhang Z C. Study on radiation-induced dispersion polymerization of vinyl acetate in polar media. Acta Polymerica Sinica, 2003, (5): 718–723 (in Chinese)

  15. Terri C, Jeremy L, Joseph M D. Dispersion polymerization of 1-vinyl-2pyrrolidone in supercritical carbon dioxide. Macromolecules, 2000, 33(6): 1917–1920

    Article  CAS  Google Scholar 

  16. Turner D T, Schwartz A. The glass transition temperature of poly(Nvinylpyrrolidone) by differential scanning calorimetry. Polymer, 1985, 26(5): 757–762

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Linfeng Zhai.

Additional information

__________

Translated from Acta Polymerica Sinica, 2007, 11 (in Chinese)

About this article

Cite this article

Zhai, L., Shi, T. & Wang, H. Preparation of polyvinylpyrrodione microspheres by dispersion polymerization. Front. Chem. China 4, 83–88 (2009). https://doi.org/10.1007/s11458-009-0003-1

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11458-009-0003-1

Keywords

Navigation