Abstract
In this study, three-dimensional MD simulations are carried out to study the nanometric scratching process. The ploughing friction coefficient and the adhesion friction coefficient are distinguished for the first time using MD simulations. The contribution of chip to friction coefficient is also evaluated. The simulation results show that the macroscale theory can qualitatively evaluate the ploughing friction coefficient, but it slightly overestimates the ploughing friction coefficient on the nanoscale for the scratching depths studied. It is found that the adhesion friction coefficient is independent of the scratching depth as predicted by macroscale theory. It is also found that the contribution of chip to friction coefficient is independent of the scratching depth and cannot be neglected on the nanoscale.
Similar content being viewed by others
References
Bowden, F.P., Tabor, D.: The Friction and Lubrification of Solids, vol. 1. Clarendon Press, Oxford (1950–1954)
Moore, D.F.: Principles and Applications of Tribology. Pergamon, Oxford (1975)
Fang, T.H., Weng, C.I.: Three-dimensional molecular dynamics analysis of processing using a pin tool on the atomic scale. Nanotechnology 11, 148–153 (2000)
Mulliah, D., Kenny, S.D., Smith, R., Sanz-Navarro, C.F.: Molecular dynamic simulations of nanoscratching of silver (1 0 0). Nanotechnology 15, 243–249 (2004)
Zhang, J.J., Sun, T., Yan, Y.D., Liang, Y.C., Dong, S.: Molecular dynamics study of groove fabrication process using AFM-based nanometric cutting technique. Appl. Phys. A Mater. Sci. Process. 94, 593–600 (2009)
Pei, Q.X., Lu, C., Lee, H.P.: Large scale molecular dynamics study of nanometric machining of copper. Comput. Mater. Sci. 41, 177–185 (2007)
Pei, Q.X., Lu, C., Lee, H.P., Zhang, Y.W.: Study of materials deformation in nanometric cutting by large-scale molecular dynamics simulations. Nanoscale Res. Lett. 4, 444–451 (2009)
Zhu, P.Z., Hu, Y.Z., Ma, T.B., Wang, H.: Study of AFM-based nanometric cutting process using molecular dynamics. Appl. Surf. Sci. 256, 7160–7165 (2010)
Yan, Y.D., Sun, T., Dong, S., Luo, X.C., Liang, Y.C.: Molecular dynamics simulation of processing using AFM pin tool. Appl. Surf. Sci. 252, 7523–7531 (2006)
Rapaport, D.C.: The Art of Molecular Dynamics Simulation. Cambridge University Press, Cambridge (1995)
Mehrez, H., Ciraci, S.: Yielding and fracture mechanisms of nanowires. Phys. Rev. B 56, 12632–12642 (1997)
Foiles, S.M., Baskes, M.I., Daw, M.S.: Embedded-atom method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys. Phys. Rev. B 33(12), 7983–7991 (1986)
Daw, M.S., Foiles, S.M., Baskes, M.I.: The embedded-atom method: a review of theory and applications. Mater. Sci. Rep. 9(7–8), 251–310 (1993)
Johnson, R.A.: Analytic nearest-neighbor model for fcc metals. Phys. Rev. B 37, 3924–3931 (1988)
Acknowledgments
We gratefully acknowledge financial support from the National Natural Science Foundation of China (Grant nos. 50730007 and 50721004) and the State Key Development Program for Basic Research of China (Grant no. 2009CB724200).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhu, Pz., Hu, Yz., Ma, Tb. et al. Molecular Dynamics Study on Friction Due to Ploughing and Adhesion in Nanometric Scratching Process. Tribol Lett 41, 41–46 (2011). https://doi.org/10.1007/s11249-010-9681-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11249-010-9681-6