Abstract
Abrasive wear of a series of WC-(5–14 wt.%)Co hardmetals was investigated employing P800 and P120 SiC abrasive papers. It was found that if fine abradant was utilized, submicron grades demonstrated substantially higher wear rates than the coarse grades. Such a behaviour was associated to different wear mechanisms operating for fine and coarse grades and correlated to the ratio of the abrasive size to size of the hard WC phase.
Similar content being viewed by others
References
Fischer, T.E., Jia, K.: Abrasion resistance of nanostructured and conventional cemented carbides. Wear 200, 206–214 (1996)
Allen, C., Sheen, M., Williams, J., Pugsley, V.A.: The wear of ultrafine WC-Co hard metals. Wear 250, 604–610 (2001)
Grearson, A., James, M., Tillman, M., Norgren, S., Gustaffson, P.: The future of finer grain hard metals. In: Proceedings of the 16th International Plansee Seminar, Plansee Holding AG, Reutte, Austria, pp. 314–338, 2005
Blombery, R.I., Perrott, C.M.: Wear of WC-Co composites during abrasion on silicon carbide. J. Aust. Inst. Met. 19, 266–269 (1974)
Larsen-Basse, J., Shishido, C.M., Tanouye, P.A.: Some features of abraded WC-Co surfaces. J. Aust. Inst. Met. 19, 270–275 (1974)
Blombery, R.I., Perrott, C.M., Robinson, P.M.: Abrasive wear of tungsten carbide–cobalt composites. I. Wear mechanisms. Mater. Sci. Eng. A 13, 93–100 (1974)
Engqvist, H., Axén, N.: Abrasion of cemented carbides by small grits. Tribol. Int. 32, 527–534 (1999)
Shipway, P.H., Hogg, J.J.: Dependence of microscale abrasion mechanisms of WC-Co hardmetals on abrasive type. Wear 259, 44–51 (2005)
Hegeman, J.B.J.W., De Hosson, J.Th.M., de With, G.: Grinding of WC–Co hardmetals. Wear 248, 187–196 (2001)
Engqvist, H., Högberg, H., Botton, G.A., Ederyd, S., Axén, N.: Tribofilm formation on cemented carbides in dry sliding conformal contact. Wear 239, 219–228 (2000)
Gee, M.G.: Low load multiple scratch tests of ceramics and hard metals. Wear 250, 264–281 (2001)
Antonov, M., Hussainova, I., Pirso, J., Volobueva, O.: Assessment of mechanically mixed layer developed during high temperature erosion of cermets. Wear 263, 878–886 (2007)
Hu, J., Li, D.Y., Llewellyn, R.: Computational investigation of microstructural effects on abrasive wear of composite materials. Wear 259, 6–17 (2005)
Axén, N., Zum Gahr, K.-H.: Abrasive wear of TiC-steel composite clad layers on tool steel. Wear 157, 189–201 (1992)
Gee, M.G., Gant, A., Roebuck, B.: Wear mechanisms in abrasion and erosion of WC/Co and related hardmetals. Wear 263, 137–148 (2007)
Acknowledgements
The author would like to acknowledge Alistair Grearson and Mathias Tillman for the great support in accomplishing this research and fruitful discussion of the results.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Krakhmalev, P.V. On the Abrasion of Ultrafine WC–Co Hardmetals by Small SiC Abrasive. Tribol Lett 30, 35–39 (2008). https://doi.org/10.1007/s11249-008-9309-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11249-008-9309-2