Skip to main content
Log in

On the Coupled Transient Hygrothermal Analysis in the Porous Cylindrical Panels

  • Published:
Transport in Porous Media Aims and scope Submit manuscript

Abstract

In this paper, transient coupled heat and moisture transfer in the cylinders and cylindrical panels of the porous medium are analyzed with three-dimensional finite element methods. Both Dofour and Soret effects are considered in the formulation, and the FEM-based weak forms of the equations are derived using Galerkin method. In the full cylinder cases, both symmetrical and unsymmetrical boundary conditions for heat and moisture are applied to cover three-dimensional and axisymmetric (two dimensional) analysis cases. The obtained systems of time-dependent differential equations are solved by Runge–Kutta method. The main objective of the present study is the analysis of fully coupled diffusion of heat and moisture in cylindrical coordinates using three-dimensional finite element methods. Also, this study addressed the ability of Runge–Kutta method to solve the coupled sets of differential equations. The results were compared with some analytical solutions in the literature, and a very good agreement was observed. The present formulation can be used for transient analysis of any cylindrical geometry with arbitrary geometrical dimensions and under desired boundary conditions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19

Similar content being viewed by others

References

  • Arefi, M., Firouzeh, S., Bidgoli, E.M.R., Civalek, O.: Analysis of porous micro-plates reinforced with FG-GNPs based on Reddy plate theory. Compos. Struct. 247(1), 112391 (2020)

    Article  Google Scholar 

  • Bisheh, H., Civalek, O.: Vibration of smart laminated carbon nanotube-reinforced composite cylindrical panels on elastic foundations in hygrothermal environments. Thin-Walled Struct. 155, 106945 (2020)

    Article  Google Scholar 

  • Chan, M.F.C.F., De Kee, D., Kaloni, P.N.: Advanced Mathematics for Engineering and Science. World Scientific, Singapore (2003)

    Google Scholar 

  • Chang, W.-J.: Transient hygrothermal responses in a solid cylinder by linear theory of coupled heat and moisture. Appl. Math. Model. 18, 467–473 (1994)

    Article  Google Scholar 

  • Chang, W.-J., Weng, C.-I.: An analytical solution to coupled heat and moisture diffusion transfer in porous materials. Int. J. Heat Mass Trans. 43, 3621–3632 (2000)

    Article  Google Scholar 

  • Cinefra, M., Petrolo, M., Li, G., Carrera, E.: Hygrothermal analysis of multilayered composite plates by variable kinematic finite elements. J. Therm. Stress. 40, 1502–1522 (2017a)

    Article  Google Scholar 

  • Cinefra, M., Petrolo, M., Li, G., Carrera, E.: Variable kinematic shell elements for composite laminates accounting for hygrothermal effects. J. Therm. Stress. 40, 1523–1544 (2017b)

    Article  Google Scholar 

  • Dastjerdi, S., Beni, Y.T.: A novel approach for nonlinear bending response of macro-and nanoplates with irregular variable thickness under nonuniform loading in thermal environment. Mech. Based Des. Struct. Mach. 47, 453–478 (2019)

    Article  Google Scholar 

  • Dastjerdi, S., Akgöz, B., Civalek, O.: On the effect of viscoelasticity on behavior of gyroscopes. Int. j. Eng. Sci. 149, 103236 (2020b)

    Article  Google Scholar 

  • Dastjerdi, S., Beni, Y.T., Malikan, M.: A comprehensive study on nonlinear hygro-thermo-mechanical analysis of thick functionally graded porous rotating disk based on two quasi-three-dimensional theories. Mech. Based Des. Struct. Mach. (2020a). https://doi.org/10.1080/15397734.2020.1814812

    Article  Google Scholar 

  • Dastjerdi, S., Malikan, M., Dimitri, R., Tornabene, F.: Nonlocal elasticity analysis of moderately thick porous functionally graded plates in a hygro-thermal environment. Compos. Struct. 255, 112925 (2021)

    Article  Google Scholar 

  • Fallahi, N., Viglietti, A., Carrera, E., Pagani, A., Zappino, E.: Effect of fiber orientation path on the buckling, free vibration, and static analyses of variable angle tow panels. Facta Universitatis, Ser.: Mech. Eng. 18(2), 165–188 (2020)

    Article  Google Scholar 

  • Fick, A.: Ueber diffusion. Ann. Phys. 94, 59–91 (1855)

    Article  Google Scholar 

  • Genao, F.Y., Kim, J., Żur, K.K.: Nonlinear finite element analysis of temperature-dependent functionally graded porous micro-plates under thermal and mechanical loads. Compos. Struct. 256, 112931 (2021)

    Article  Google Scholar 

  • Ghobadi, A., Beni, Y.T., Żur, K.K.: Porosity distribution effect on stress, electric field and nonlinear vibration of functionally graded nanostructures with direct and inverse flexoelectric phenomenon. Compos. Struct. 259(1), 113220 (2021)

    Article  Google Scholar 

  • Incropera, F.P., De Witt, D.P., Bergman, T.L., Lavine, A.S.: Introduction to Heat Transfer, 5th edn. Wiley, Hoboken (2006)

    Google Scholar 

  • Jalaei, M.H., Civalek, Ӧ: On dynamic instability of magnetically embedded viscoelastic porous FG nanobeam. Int. j. Eng. Sci. 143, 14–32 (2019)

    Article  Google Scholar 

  • Jankowski, P., Żur, K.K., Kim, J., Reddy, J.N.: On the bifurcation buckling and vibration of porous nanobeams. Compos. Struct. 250, 112632 (2020)

    Article  Google Scholar 

  • Kim, J., Żur, K.K., Reddy, J.N.: Bending, free vibration, and buckling of modified couples stress-based functionally graded porous micro-plates. Compos. Struct. 209, 879–888 (2019)

    Article  Google Scholar 

  • Kumar, J.S., Chakraverty, S., Malikan, M., Sedighi, H.M.: Hygro-magnetic vibration of the single-walled carbon nanotube with nonlinear temperature distribution based on a modified beam theory and nonlocal strain gradient model. Int. j. Appl. Mech. 12(05), 2050054 (2020)

    Article  Google Scholar 

  • Lai, W.M., Krempl, E., Rubin, D.: Introduction to Continuum Mechanics, 4th edn. Butterworth-Heinemann, Burlington (2010)

    Google Scholar 

  • Liu, G.R., Quek, S.S.: The Finite Element Method: A Practical Course. Butterworth-Heinemann, Burlington (2003)

    Google Scholar 

  • Lv, Z., Liu, P., Zhao, Y.: Experimental study on the effect of gas adsorption on the effective stress of coal under triaxial stress. Transp. Porous Media 137, 365–379 (2021)

    Article  Google Scholar 

  • Ma, X., Cheng, B., Mao, J., Liu, W., Zi, D.: Finite element modelling of coupled heat and moisture transfer in typical earth-sheltered building envelope. In: Eleventh International IBPSA Conference, pp. 1850–1856 (2009)

  • Malekzadeh Fard, K., Pourmoayed, A.R.: Optimization of the prismatic core sandwich panel under buckling load and yield stress constraints using an improved constrained differential evolution algorithm. J. Appl. Comput. Mech. 6(4), 920–933 (2020)

    Google Scholar 

  • Noori, A.R., Aslan, T.A., Temel, B.: Dynamic analysis of functionally graded porous beams using complementary functions method in the Laplace domain. Compos. Struct. 256, 113094 (2021)

    Article  Google Scholar 

  • Saadatfar, M.: Stress redistribution analysis of piezomagnetic rotating thick-walled cylinder with temperature-and moisture-dependent material properties. J. Appl. Comput. Mech. 6(1), 90–104 (2020)

    Google Scholar 

  • Salehipour, H., Shahsavar, A., Civalek, O.: Free vibration and static deflection analysis of functionally graded and porous micro/nanoshells with clamped and simply supported edges. Compos. Struct. 221(1), 110842 (2019)

    Article  Google Scholar 

  • Salehipour, H., Shahgholian-Ghahfarokhi, D., Shahsavar, A., Civalek, O., Edalati, M.: Static deflection and free vibration analysis of functionally graded and porous cylindrical micro/nano shells based on the three-dimensional elasticity and modified couple stress theories. Mech. Based Des. Struct. Mach. (2020). https://doi.org/10.1080/15397734.2020.1775095

    Article  Google Scholar 

  • Segerlind, L.J.: Applied Finite Element Analysis, 2nd edn. Wiley, Toronto (1984)

    Google Scholar 

  • Sih, G.C., Michopoulos, J., Chou, S.C.: Hygrothermoelasticity. Kluwer Academic Publishers, New York (1986)

    Book  Google Scholar 

  • Straughan, B.: Nonlinear stability for thermal convection in a brinkman porous material with viscous dissipation. Transp. Porous Med. 134, 303–314 (2020)

    Article  Google Scholar 

  • Zhang, B., Cheng, Z., Zhang, L.: Numerical simulation for coupled heat and moisture transfer in building material. In: 3rd International Conference on Material, Mechanical and Manufacturing Engineering. IC3ME (2015)

Download references

Acknowledgements

This work has been financially supported by the research deputy of Shahrekord University. The Grant Number was 97GRN1M835.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yaghoub Tadi Beni.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Beni, Y.T., Alihemmati, J. On the Coupled Transient Hygrothermal Analysis in the Porous Cylindrical Panels. Transp Porous Med 142, 89–114 (2022). https://doi.org/10.1007/s11242-021-01605-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11242-021-01605-2

Keywords

Navigation