In this study, analytical and numerical investigations were extensively conducted to evaluate the flexural behavior of concrete beams reinforced with aramid fiber-reinforced polymer (AFRP) rebars. The AFRP-reinforced concrete beams were analyzed using the separated finite element method containing different elements for concrete and reinforcement. In addition, this study used two different effective moment of inertia expressions to estimate the load-deflection responses and the service-load deflections of the beams. The service-load deflections of the AFRP-reinforced concrete beams obtained from the finite element analysis were in close agreement with those from the effective moment of inertia expressions. The numerical ultimate moments also correlated well with the analytical values of concrete stress-strain models. Numerical analyses, which hardly predict the sudden reduction in the flexural rigidity of FRP-reinforced concrete beams due to the crushing of cover concrete, were shown to provide somewhat conservative deflection estimates.
Similar content being viewed by others
References
A. C. Berg, L. C. Bank, M. G. Oliva, and J. S. Russell, “Construction and cost analysis of an FRP reinforced concrete bridge deck,” Constr. Build. Mater., 20, 515–526 (2006).
E. El-Salakawy, B. Benmokrane, A. El-Ragaby, and D. Nadeau, “Field investigation on the first bridge deck slab reinforced with glass FRP bars constructed in Canada,” ASCE J. Compos. Constr., 9, 470–479 (2005).
B. Benmokrane, E. El-Salakawy, S. El-Gamal, and S. Goulet, “Construction and testing of an innovative concrete bridge deck totally reinforced with glass FRP bars: Val-Alain bridge on highway 20 east,” ASCE J. Bridge Eng., 12, 632–645 (2007).
ACI 440.1R-06. ACI Committee 440 Guide for the Design and Construction of Concrete Reinforced with FRP Bars, American Concrete Institute, Farmington Hills, Michigan (2006).
CSA Standard S806-02: Design and Construction of Building Component with Fiber-Reinforced Polymers, Canadian Standards Association, Toronto, Ontario, Canada (2002).
Japan Society of Civil Engineers Recommendation for Design and Construction of Concrete Structures Using Continuous Fiber Reinforcing Materials, Concrete Engineering Series No. 23, Research Committee on Continuous Fiber Reinforced Material, Tokyo, Japan (1997).
S. S. Faza and H. V. S. Ganga Rao, “Theoretical and experimental correlation of behavior of concrete beams reinforced with fiber reinforced plastic rebars,” SP-138, ACI, Farmington Hills, Michigan (1993).
B. Benmokrane, O. Chaallal, and R. Masmoudi, “Flexural response of concrete beams reinforced with FRP reinforcing bars,” ACI Struct. J., 93, 46–55 (1996).
D. Gao, B. Benmokrane, and R. Masmoudi, “A calculating method of flexural properties of FRP-reinforced concrete beam. Part 1: Crack width and deflection,” Technical Report, Department of Civil Engineering, University of Sherbrooke, Sherbrooke, Quebec, Canada (1998).
M. Theriault and B. Benmokrane, “Effects of FRP reinforcement ratio and concrete strength on the flexural behavior of concrete beams,” ASCE J. Compos. Constr., 2, 7–16 (1998).
R. Masmoudi, M. Theriault, and B. Benmokrane, “Flexural behavior of concrete beams reinforced with deformed fiber reinforced plastic reinforcing rods,” ACI Struct. J., 95, 665–676 (1998).
H. A. Toutanji and M. Saafi, “Flexural behavior of concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars,” ACI Struct. J., 97, 712–719 (2000).
J. R. Yost, S. P. Gross, and D. W. Dinehart, “Effective moment of inertia for glass fiber-reinforced polymer-reinforced concrete beams,” ACI Struct. J., 100, 732–739 (2003).
M. A. Rashid, M. A. Mansur, and P. Paramasivam, “Behavior of aramid fiber-reinforced polymer reinforced high strength concrete beams under bending,” ASCE J. Compos. Constr., 9, 117–127 (2005).
H. Vogel and D. Svecova, “New approach for estimating the deflection of beams reinforced with FRP reinforcement,” ASCE J. Compos. Constr., 12, 579–587 (2008).
ACI 318M-05. Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, Michigan (2005).
D. E. Branson, “Instantaneous and time-dependent deflections of simple and continuous reinforced concrete beams,” HPR Report No. 7, Part 1, Alabama Highway Department, Bureau of Public Roads, Alabama (1965).
P. H. Bischoff, “Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars,” ASCE J. Struct. Eng., 131, 752–762 (2005).
P. H. Bischoff, “Rational model for calculating deflection of reinforced concrete beams and slabs,” Can. J. Civ. Eng., 34, 992–1002 (2007).
Comite Euro-International Du Beton. CEB-FIP Model Code 1990: Design Code, Thomas Telford, London (1993).
P. H. Bischoff and A. Scanlon, “Effective moment of inertia for calculating deflections of concrete members containing steel reinforcement and fiber-reinforced polymer reinforcement,” ACI Struct. J., 104, 68–75 (2007).
ANSYS User’s Manual Version 10, Swanson Analysis Systems Inc., Houston, USA (2006).
A. Arnesen, S. I. Sorensen, and P. G. Bergan, “Nonlinear analysis of reinforced concrete,” Comput. Struct., 12, 571–579 (1980).
A. F. Barbosa and G. O. Riberio, “Analysis of reinforced concrete structures using ANSYS nonlinear concrete model,” Comput. Mech., 1, 1–7 (2004).
I. Kalkan and A. Buyukkaragoz, “A numerical and analytical study on distortional buckling of doubly-symmetric steel I-beams,” J. Constr. Steel Res., 70, 289–297 (2012).
E. Ellobody and B. Young, “Nonlinear analysis of concrete filled steel SHS and RHS columns,” Thin Walled Struct., 44, 919–930 (2006).
K. F. Faherty, An Analysis of a Reinforced and a Prestressed Concrete Beam by Finite Element Method, Ph.D. Dissertation, University of Iowa (1972).
P. Fanning, “Nonlinear models of reinforced and post-tensioned concrete beams,” Elect. J. Struct. Eng., 2, 111–119 (2001).
Y. Hemmaty, G. De Roeck, and L. Vandewalle, “Finite element modelling of corner joints in reinforced concrete frames,” in: Proc. of Int. Conf. Concrete 2000, Economic and Durable Construction through Excellence, Dundee, UK (1993), pp. 465–472.
D. I. Kachlakev, T. Miller, S. Yim, et al., “Finite element modelling of reinforced concrete structures strengthened with FRP laminates,” Final Report SPR316, Oregon Department of Transportation Research Group (2001).
M. Ozcan, A. Bayraktar, A. Sahin, et al., “Experimental and finite element analysis on the steel fiber reinforced concrete (SFRC) beams ultimate behavior,” Constr. Build. Mater., 23, 1064–1077 (2009).
H. Pham, R. Al-Mahaidi, and V. Sauma, “Modelling of CFRP concrete bond using smeared and discrete cracks,” Compos. Struct., 75, 145–150 (2006).
L. U. Xinzheng and J. Jianjing, “Analysis for concrete structure under complex stress condition with Solid65 FEA element of ANSYS,” Build. Struct., 33, 22–24 (2003).
T. H. Wee, M. S. Chin, and M. A. Mansur, “Stress-strain relationship of high strength concrete in compression,” ASCE J. Mater. Civ. Eng., 8, 70–76 (1996).
C. E. Todeschini, A. C. Bianchini, and C. E. Kesler, “Behavior of concrete columns reinforced with high strength steels,” ACI J. Proc., 61, 704–716 (1964).
A. Buyukkaragoz and A. Arslan, “The effect of steel plates with shear studs for weak column–strong beam connections in the reinforced concrete structures under earthquake effect,” Strain, 47, 393–411 (2011).
K. J. Willam and E. P. Warnke, “Constitutive model for triaxial behaviour of concrete,” in: Proc. of Concrete Structures Subjected to Triaxial Stresses (International Association of Bridge and Structural Engineering Conference), Bergamo, Italy (1974), pp. 174–191.
A. J. Wolanski, Flexural Behavior of Reinforced and Prestressed Concrete Beams Using Finite Element Analysis, M.S. Thesis, Marquette University, Milwaukee, Wisconsin. (2004).
ACI 318-99. Building Code Requirements for Structural Concrete and Commentary (ACI 318R-99), American Concrete Institute, Detroit (1999).
D. Lau and H. J. Pam, “Experimental study of hybrid FRP reinforced concrete beams,” Eng. Struct., 32, 3857–3865 (2010).
Comite Europeen de Normalisation. Eurocode 2: Design of Concrete Structures – Part 1-1: General Rules and Rules for Buildings (EN 1992-1-1: 2004), Comite Europeen de Normalisation (CEN), Brussels, Belgium, (2004).
S. H. Alsayed, Y. A. Al-Salloum, and T. H. Almusallam, “Performance of glass fiber reinforced plastic bars as a reinforcing material for concrete structures,” Composites Part B, 31, 555–567 (2000).
M. M. Rafi, A. Nadjai, F. Ali, and D. Talamona, “Aspects of behaviour of CFRP reinforced concrete beams in bending,” Constr. Build. Mater., 22, 277–285 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Problemy Prochnosti, No. 6, pp. 112 – 129, November – December, 2013.
Rights and permissions
About this article
Cite this article
Buyukkaragoz, A., Kalkan, I. & Lee, J.H. A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars. Strength Mater 45, 716–729 (2013). https://doi.org/10.1007/s11223-013-9507-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-013-9507-5