The effect of the modification of a fine filler with an epoxy oligomer and compositions by ultraviolet irradiation on the creep of materials filled with basalt and glass cloths under the influence of aggressive media has been studied. It has been found that to reduce the creep of materials, two-layer epoxy composite “hybrid” materials containing glass and basalt cloths must be used. In order to improve the performance of composites, an ultraviolet-irradiated epoxy binder containing epoxy-oligomer-modified fine filler particles must be used as an interlayer.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11223-011-9302-0/MediaObjects/11223_2011_9302_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11223-011-9302-0/MediaObjects/11223_2011_9302_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11223-011-9302-0/MediaObjects/11223_2011_9302_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11223-011-9302-0/MediaObjects/11223_2011_9302_Fig4_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11223-011-9302-0/MediaObjects/11223_2011_9302_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11223-011-9302-0/MediaObjects/11223_2011_9302_Fig6_HTML.gif)
Similar content being viewed by others
References
G. Lyubin (Ed.), Handbook of Composite Materials in 2 volumes [Russian translation], Vol. 1, Mashino- stroenie, Moscow (1988).
V. K. Knyazev, Structural Epoxy Materials in Machine-Building [in Russian], Mashinostroenie, Moscow (1977).
P. D. Stukhlyak, A. V. Buketov, and I. G. Dobrotvor, Epoxy Composite Materials Modified with Energy Fields [in Ukrainian], Zbruch, Ternopil (2008).
P. D. Stukhlyak, A. V. Buketov, and V. V. Levyts’kyi, “Epoxy composites. A study of the mechanism of influence of forming technique on properties,” Khim. Promysl. Ukraine, No. 5, 17–23 (2004).
M. G. Chernyak (Ed.), Continuous Glass Fiber. Basis of Technology and Properties [in Russian], Khimiya, Moscow (1965).
D. D. Dzhigiris, M. F. Makhova, V. D. Gorobinskaya, and L. I. Bombar’, “Continuous basalt fiber,” Steklo Keram., No. 9, 14–18 (1983).
A. V. Buketov, P. D. Stukhlyak, V. V. Levyts’kyi, et al., “A study of the combined effect of glass fibers and fine fillers on the processes of cross-linking of epoxy composites,” Vopr. Khim. Khim. Tekhnol., No. 3, 90–95 (2007).
P. G. Babaevskii (Ed.), Text Book on Polymeric Materials Science [in Russian], Khimiya, Moscow (1980).
A. V. Buketov, P. D. Stukhlyak, and A. G. Mikitishin, Setup for Measuring the Physicomechanical Characteristics of Materials under Bending [in Ukrainian], Ukrainian Patent No. 65902, IPC G01 B7/16. Effective as of April 15 2004.
C. C. Chamis and R. F. Lark, “Hybrid composites – state-of-the-art review: Analysis, design, application and fabrication,” in: Proc. of 18th AIAA SDV Conf. (San Diego, CA, 21–23 March, 1977), pp. 311–331.
A. W. Adamson, Physical Chemistry of Surfaces, Third edition, Wiley, New York; London; Sydney; Toronto (1975).
D. Skola, “High-modulus fibers and interface in polymeric fibrous composites,” in: Composite Materials in 6 volumes [Russian translation], Vol. 6: Interfaces in Polymeric Composites, Mir, Moscow (1978), pp. 228–291.
P. N. Bogdanovich and V. Ya. Pruchchak, Friction and Wear in Machines [in Russian], Vysha Shkola, Minsk (1999).
E. M. Kal’ba, A. V. Buketov, P. P. Savchuk, S. M. and Holotenko, “Adhesion strength of polymer-containing protective coatings,” Mater. Sci. Chem. Mater. Sci., 35, No. 1, 125–128 (1999).
A. Akinci, “Mechanical and morphological properties of basalt filled polymer matrix composites,” Mater. Sci. Eng., 35, No. 1, 29–32 (2009).
A. Akinci, H. Akbulut, and F. Yilmaz, “Mechanical properties of cost-effective polypropylene composites filled with red-mud particles,” Polymers & Polymer Comp., 16, No. 7, 439–446 (2008).
P. D. Stukhlyak and A. V. Buketov, Epoxy Composite Materials Modified by Ultraviolet Irradiation [in Ukrainian], Zbruch,Ternopil (2009).
A. V. Buketov, P. D. Stukhlyak, I. G. Dobrotvor, et al., “Effect of the nature of fillers and ultraviolet irradiation on the mechanical properties of epoxy composite coatings,” Strength Mater., 41, No. 4, 431–435 (2009).
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 3, pp. 141 – 153, May – June, 2011.
Rights and permissions
About this article
Cite this article
Buketov, A.V., Stukhlyak, P.D., Levyts’kyi, V.V. et al. A study of creep of epoxy composites with continuous fibers and modified fine filler in aggressive media. Strength Mater 43, 338–346 (2011). https://doi.org/10.1007/s11223-011-9302-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-011-9302-0