Abstract
On the basis of numerical simulation of the process of isothermal upsetting of a symmetric structurally inhomogeneous billet of AMg6 alloy with different rheological properties of the layers, rate sensitivity and strain-hardening coefficients of the surface layer material with fine-grained structure are determined, which ensure a considerable decrease in the level of normal contact stresses and the scalar damage parameter (degree of utilization of plasticity resource) of the article at the maximum values of contact friction factor. The possibility of using electric pulse treatment to obtain an efficient modified surface layer is substantiated.
Similar content being viewed by others
References
N. P. Barykin and A. Kh. Valeeva, “Numerical simulation of contact interaction between the tool and a plastically deformed body through an interlayer of viscoplastic material,” Tren. Iznos, No. 6, 629–634 (2002).
H. Knopfel, Ultrastrong Pulsed Magnetic Fields [Russian translation], Mir, Moscow (1972).
Z. G. Kamalov and I. Sh. Valeev, “Change of the structural state of copper under the action of high-power current pulses,” Fiz.-Khim. Obrab. Metal., No. 2, 67–72 (2000).
V. L. Kolmogorov, Mechanics of the Plastic Working of Metals [in Russian], UGTN-UPI, Ekaterinburg (2001).
A. A. Labutin, F. F. Korotaev, and G. P. Gulyaev, “On the prediction of failure resource in the case of plastic deformation of metals,” in: Researches in the Field of Plasticity and Processings of Metals under Pressure [in Russian], Tula (1975), Issue 3, pp. 95–98.
P. I. Polukhin, G. Ya. Gun, and A. M. Galkin, Plastic Resistance of Metals and Alloys. Handbook [inRussian], Metallurgiya, Moscow (1983).
R. A. Vasin, F. U. Enikeev, and M. I. Mazurskii, “Procedure for the determination of the rate sensitivity parameter of superplastic material from the initial portion of stress-strain curves,” Zavod. Lab., No. 1, 44–48 (1997).
Author information
Authors and Affiliations
Additional information
__________
Translated from Problemy Prochnosti, No. 4, pp. 123–131, July–August, 2008.
Rights and permissions
About this article
Cite this article
Barykin, N.P., Valeeva, A.K. & Valeev, I.S. Effect of the rheological parameters of the surface layer of structurally inhomogeneous billets on fore and strain characteristics in the case of plastic strain. Strength Mater 40, 485–490 (2008). https://doi.org/10.1007/s11223-008-9060-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-008-9060-9