Abstract
The objective of the Lunar Reconnaissance Orbiter (LRO) Laser Ranging (LR) system is to collect precise measurements of range that allow the spacecraft to achieve its requirement for precision orbit determination. The LR will make one-way range measurements via laser pulse time-of-flight from Earth to LRO, and will determine the position of the spacecraft at a sub-meter level with respect to ground stations on Earth and the center of mass of the Moon. Ranging will occur whenever LRO is visible in the line of sight from participating Earth ground tracking stations. The LR consists of two primary components, a flight system and ground system. The flight system consists of a small receiver telescope mounted on the LRO high-gain antenna that captures the uplinked laser signal, and a fiber optic cable that routes the signal to the Lunar Orbiter Laser Altimeter (LOLA) instrument on LRO. The LOLA instrument receiver records the time of the laser signal based on an ultrastable crystal oscillator, and provides the information to the onboard LRO data system for storage and/or transmittal to the ground through the spacecraft radio frequency link. The LR ground system consists of a network of satellite laser ranging stations, a data reception and distribution facility, and the LOLA Science Operations Center. LR measurements will enable the determination of a three-dimensional geodetic grid for the Moon based on the precise seleno-location of ground spots from LOLA.
Similar content being viewed by others
References
G.W. Bush, A renewed spirit of discovery: The president’s vision for U.S. space exploration, 9 pp., Executive Office of the President, Washington D.C., 2004
CDDIS website: http://cddis.nasa.gov/facility.html
J.F. Cavanaugh , The Mercury Laser Altimeter instrument for the MESSENGER mission. Space Sci. Rev. 131, 451–480 (2007). doi:10.1007/s11214-007-9273-4
G. Chin , Lunar reconnaissance orbiter overview: The instrument suite and mission. Space Sci. Rev. 129, 391–419 (2007). doi:10.10007/s11214-007-9153-y
ILRS website: http://ilrs.gsfc.nasa.gov
A.S. Konopliv , Recent gravity models as a result of the Lunar Prospector mission. Icarus 150, 1–18 (2001)
A.S. Konopliv , Gravity field of the Moon from Lunar Prospector. Science 281, 1476–1480 (1998)
F.G. Lemoine , A 70th degree and order lunar gravity model from Clementine and historical data. J. Geophys. Res. 102, 16,339–16,359 (1997)
F.G. Lemoine , An improved solution of the gravity field of Mars (GMM-2B) from Mars Global Surveyor. J. Geophys. Res. 106, 23,359–23,376 (2001)
LRO: Lunar Reconnaissance Orbiter Project Timing Specification, LRO NGIN 431-SPEC-000212, NASA/Goddard Space Flight Center, Greenbelt, MD, September 8, 2006
S.B. Luthcke , Spaceborne laser altimeter pointing bias calibration from range residual analysis. J. Spacecr. Rockets 37, 374–384 (2000)
J. McGarry, T. Zagwodzki, SLR2000: The path towards completion, in Proc. 15th Int. Workshop on Laser Ranging, Canberra, Australia, 2006
T.W. Murphy Jr., et al.: The Apache Point Observatory lunar laser ranging operation, in 12th Int. Workshop on Laser Ranging, Matera, Italy, 2000, 10 pp.
G.A. Neumann , The crossover analysis of MOLA altimetric data. J. Geophys. Res. 106, 23,753–23,768 (2001)
C. Noll et al., Laser ranging archiving and infrastructure support through the ILRS data centers and web site, in 15th International Workshop on Laser Ranging, Canberra, Australia, 2006
D.E. Pavlis et al., GEODYN operations manuals. Raytheon ITTS Contractor Report, Lanham, MD, 2001
M. Pearlman et al., The International Laser Ranging Service. AOGS Advances in Geosciences: Solid Earth (2008)
L. Ramos-Izquierdo et al., Optical system design and integration of the Lunar Orbiter Laser Altimeter (2008, manuscript in preparation)
R. Ricklefs, Consolidated laser prediction and data formats: Supporting new technology, in Proc. 15th Int. Workshop on Laser Ranging, Canberra, Australia, 2006
M.S. Robinson et al., The Lunar Reconnaissance Orbiter Camera (LROC). Space Sci. Rev. (2008)
D.D. Rowlands , The use of laser altimetry in the orbit and attitude determination of Mars Global Surveyor. Geophys. Res. Lett. 26, 1191–1194 (1999)
D.D. Rowlands et al., A simulation study of multi-beam altimetry for Lunar Reconnaissance Orbiter and other planetary missions. J. Geodesy (2008). doi:10.1007/s00190-008-0285-y
D.E. Smith , The global topography of Mars and implications for surface evolution. Science 284, 1495–1503 (1999)
D.E. Smith , Mars Orbiter Laser Altimeter (MOLA): Experiment summary after the first year of global mapping of Mars. J. Geophys. Res. 106, 23,689–23,722 (2001)
D.E. Smith et al., Orbit determination of LRO at the Moon, in 7th Int. Laser Ranging Service Workshop, Oct. 13–17, 2008, Poznan, Poland
D.E. Smith et al., The Lunar Orbiter Laser Altimeter (LOLA) investigation on the Lunar Reconnaissance Orbiter (LRO) mission. Space Sci. Rev. (2009, this issue)
M.T. Zuber , The Mars Observer Laser Altimeter investigation. J. Geophys. Res. 97, 7781–7798 (1992)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zuber, M.T., Smith, D.E., Zellar, R.S. et al. The Lunar Reconnaissance Orbiter Laser Ranging Investigation. Space Sci Rev 150, 63–80 (2010). https://doi.org/10.1007/s11214-009-9511-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11214-009-9511-z